SWC Forums
Pull up a chair...let's talk fishing.
Hey guys, new here to the forum. Santa will be bringing to me a downrigger this year. I just want to get opinions on wether to get a mounting device that slides into the rod-holders in my boat or have it mounted. I have limited flat surface space thlough. Thanks.
btw, its a 21ft robalo cc.
thanks
SEE PHOTOS ATTACHED IN LATER POST
Hey thats a good question to which I would be interested to hear from too. Though I must have been a bad boy this year, as santa is not bringing me one... but I'm in a boat club so I would be making mine "portable". Thanks in advance!!
Hey guys, new here to the forum. Santa will be bringing to me a downrigger this year. I just want to get opinions on wether to get a mounting device that slides into the rod-holders in my boat or have it mounted. I have limited flat surface space thlough. Thanks.
btw, its a 21ft robalo cc.
thanks
Since you've got limited mounting space I'd recommend a base mounted on a rod holder insert.
Assuming you're only getting one, you can easily mount it on the either side of the boat as condidtions dictate. Also keeps the surface of the gunnel uncluttered when you're not using it.
If you go the rod holder mount route make sure your rod holders are up to the job. I.E., high quality heavy duty rod holders mounted with stainless backplates on the underside of the gunnel surface with plenty of fiberglass in between.
If you are uncertain if your holders are up to the job have an old salt with plenty of experience take a look at them for you.
PS Take a look at the home page on my web site and you'll see a couple mounted on the back of the boat. both of them are mounted on rod holder inserts.
The gimble mounts are the bomb never will I have another boat that the downrigger is mounted directly to the boat ,,,,,, You do need a heavy duty flush mount rod holder , and if you go with the penn down riggers a lot of times it takes the penn jr gimble mount instead of the senior
I agree.....get the gimble mounts and make sure you get the right size.
I'd go with the rod holder mount if your going to use it for a dredge/teaser or pulling a bait with a release setup. The simple reason being that it makes them easy to get them out of the way in a hurry. You don't want that big clunky thing in the way when you're trying to wire a fish. At that point it's just something else to tangle a line on.
Most of them have options for an attached rod holder so you won't lose out in that regard.
However, if your going to be using them to catch fish without a breakaway, the pad mount setup is a little more stable and won't move around on you or come out of the rod holder if you're cranking hard. If it's electric, this won't matter.
The other advantage with a pad is you can put the downrigger wherever you want it without worrying about having a rod holder there.
It all depends on the planned use.
I have a pair of Cannon Uni- Troll 10's mounted to the corners of the boat on a swivel base and just love them there. They are extremely stable and we use planers on the downriggers. The swivel base is a must. The downriggers can be removed just by pressing the tab and sliding them forward. I would not want to give up two of my rod holders.
I have been very happy with this setup.
when you get the rod holders that are mounted on the downrigger you do not lose any rod holders it just makes for a better rod angle while using the downrigger
I also hook a small rope to my downrigger and tie it to a cleat so incase something did happen I do not lose the downrigger ,,,, that is a sad sight watching the downrigger sinking in the water
I have a pair of Cannon Uni- Troll 10's mounted to the corners of the boat on a swivel base and just love them there. They are extremely stable and we use planers on the downriggers. The swivel base is a must. The downriggers can be removed just by pressing the tab and sliding them forward. I would not want to give up two of my rod holders.
I have been very happy with this setup.
X2
when you get the rod holders that are mounted on the downrigger you do not lose any rod holders it just makes for a better rod angle while using the downrigger
I also hook a small rope to my downrigger and tie it to a cleat so incase something did happen I do not lose the downrigger ,,,, that is a sad sight watching the downrigger sinking in the water
I agree. With Cannons, you can actually pick up an additional rod holder per downrigger as they offer an option to mount dual holders on the downrigger.
I'm not sure about the newer Cannons; however, the older Lexan models that I have won't stand up to heavy strike drag settings. They are fine for trolling dead baits which you intend to drop back; however, I wouldn't go above a 40% strike setting on 30# class gear and forget about 50# and above unless you are going to use very light drag settings.
In all cases, I'd recommend safety lanyards on your reels when using them in the downrigger holders. If you wrap a rod tip, even if you're trollling dead baits, you risk bustting the holder off the mount.
It seems its 50/50 so far. I will post a photo of the boat. I like the swivel idea for the base. Does the gimbel rod holder set up have a swivel base option.
It seems its 50/50 so far. I will post a photo of the boat. I like the swivel idea for the base. Does the gimbel rod holder set up have a swivel base option.
On Cannons, the swivel base attaches to whatever mount you choose and as someonse suggested earlier is certainly a must have item. I wouldn't think of using a downrigger that didn't have them for a number of reasons.
The Penn Jr. bases we use are heavy and extremely sturdy, holding the downriggers securely in the rod mount. A rod mount will allow you to easily get your downrigger out of the way when fighting a fish and flexibility to position it where you need it in your spread. True, you may be able to remove it from a fixed mount base, but the base is still there - one more thing to get in the way and hang a line on.
I have two swivel bases mounted to the back corners of my boat and absolutely love them there along with my cannon downriggers. However since it looks like your boat might be a little smaller or cramped for space I would recommend the rod holder gimble mount. They work just as well as a permanent mount and will save you space in the long run.
I have used both the rod holder mount and the swivel base gunnel mount. If you use double rigged outriggers you will need the swivel base on the back corners so you don't loose a gunnel rod holder that you need for the second outrigger line.
If there is not room aft of your most aft rodholder for the swivel mount then you have to go with the rodholder mount. I used a home made gimble mount welded to a cannon sport troll for years on my seapro 206 and it worked well. That boat had gunnels that curved down with a long taper aft so mounting downriggers wasn't an option. I let that setup go with the boat. Now I have the swivel mounts with the exact setup (we both run albemarle 24s) as gsrsol84mm and I like that better.
One thing is for sure, downriggers will catch you more fish no matter how you mount them. Good luck.