SWC Forums

Pull up a chair...let's talk fishing.

Notifications
Clear all

Electronics question

19 Posts
11 Users
0 Reactions
713 Views
Jess Grace
(@)
Reputable Member
Joined: 20 years ago
Posts: 180
Topic starter   [#37303]

Hello friends- I just bought a new to me 22 foot triton saltwater series boat. It has a garmin 2010 fishfinder/chart plotter. I want to do a lot of bottom fishing and wanted your opinion on if I should put a new bottom sounder on it or if the garmin 2010 was sufficient. If you think I should put a new unit on it what would you recommend.

Thanks

Jess Grace
Wilmington
Dolphin Bay



   
Quote
William McCann
(@werewolf0711)
Famed Member
Joined: 15 years ago
Posts: 3133
 

Is the 2010 a model number or a year it was installed. Garmin makes some pretty good stuff. Maybe not the best by any means but the real question comes down to your transducer. If your going to be bottom fishing you best make sure your transducer is 1kw. It will make bottom detail a lot better



   
ReplyQuote
Jess Grace
(@)
Reputable Member
Joined: 20 years ago
Posts: 180
Topic starter  

It was installed in 2004 the model # is a 2010. Not sure on the transducer but will check. Would be surprised if it is 1kw.



   
ReplyQuote
warren barton
(@rockhound)
Noble Member
Joined: 19 years ago
Posts: 946
 

I doubt someone put a 1k on a 22 ft.boat.Transom or through hull?Get a new furuno if you going to get a new one.Cant go wrong with it.Youre prob not gonna fish the deep that much so a 600 will do you fine.I fished furuno 600,and 620 lcds when they first came out and loved them both and they cost was minimum.



   
ReplyQuote
Amanda
(@blueoceaneyez)
Famed Member
Joined: 21 years ago
Posts: 3235
 

I had one like that on a previous boat... It was fine & used in FL where we fished 100-400' daily…. but once upgraded to the newer (at the time) 4210 and gsd 22 the upgrade was awesome. Did not have a 1kw so won't comment on it. Good detail & features over the 2010 + it takes SD cards instead of data cards. I'd use the 2010 but if u have $ sitting around sell it & upgrade.



   
ReplyQuote
Bryan Meade
(@)
Estimable Member
Joined: 21 years ago
Posts: 82
 

I installed a 4212 on my pursuit with a gsd 24 600watt trans last year and it works great.If you are used to garmin, then just stick the same brand.Easy to install also. Just plug and its ready to use, except for power black - red +.EASY.



   
ReplyQuote
Larry Rowland
(@lwr37)
Famed Member
Joined: 16 years ago
Posts: 2552
 

Get you Lowrance HDSXX and don't look back! Seriously I have 2010 GEN1 HDS7 and HDS10 with an Airmar 1kw ducer. Furuno does have some awesome machines though. If you can hold out for a couple years the chirp prices are going to drop.

Freshwater

Saltwater@100'



   
ReplyQuote
John
 John
(@)
Famed Member
Joined: 20 years ago
Posts: 3801
 

If it is in good shape, I'd stay with the Garmin. Will show you anything a Lowrance will.
Good Luck



   
ReplyQuote
Jess Grace
(@)
Reputable Member
Joined: 20 years ago
Posts: 180
Topic starter  

Thanks for all the info. And keep it coming.... I am leaning on holding out til next year then asking Santa for it.... But I just hope it will hold out and be strong enough to have some success this year. I been without a boat for a year and it made it a tough year. So I am super excited to get out there and wet a line and pull up some meat..

Tight lines

Jess

Geaux Tigers beat Iowa!!



   
ReplyQuote
Vic
 Vic
(@vic)
Estimable Member
Joined: 19 years ago
Posts: 169
 

Hi Jess, I think you had a GB before this one....
Are you planning to stay little more nearshore with this 22?



   
ReplyQuote
William McCann
(@werewolf0711)
Famed Member
Joined: 15 years ago
Posts: 3133
 

Thanks for all the info. And keep it coming.... I am leaning on holding out til next year then asking Santa for it.... But I just hope it will hold out and be strong enough to have some success this year. I been without a boat for a year and it made it a tough year. So I am super excited to get out there and wet a line and pull up some meat..

Tight lines

Jess

Geaux Tigers beat Iowa!!

I'm sure it will get the job done. You will just have to train your eye to what your looking for. Electronics is the same as cars and everything else. Everyone has a favorite. Is your unit behind the times. Yes. But it will do the job until you feel comfortable replacing it. I have a 4210 with a gsd 22. Bought my stuff a few months too early as the gsd 24 came out shortly after we put our electronics on the boat. So that's just how quickly things can change. The chirp technology is the latest and greatest and that's what I'm looking into when I get the chance. Just letting prices settle out. That might be a little overkill for your application but it's another option.



   
ReplyQuote
Jess Grace
(@)
Reputable Member
Joined: 20 years ago
Posts: 180
Topic starter  

Yes I had a 26 Glacier Bay. Owned it with my buddy. Loved that boat. Then we decided to sell it. I then got a 22 nautic star but the hurricane that year took its toll on my house and I needed some money so I sold it. Then thought I would try inshore fishing and got a 19 Livingston cat. It was nice but it killed me not getting offshore at least a little so I sold it. Landed on this Triton 22 and thought it was a good compromise. Planning on mostly pulling skiers and tubes and going to masonboro. Then 2 to 3 trips in may to catch some mahi on the perfect days 45 miles out or so. Then mostly bottom fishing 25 to 45miles if it is a perfect day. I have a flexible schedule so I can pick my days. All in all I am just looking forward to bing on the water.

That's my plan...

We shall see.

Jess



   
ReplyQuote
James
(@)
Noble Member
Joined: 20 years ago
Posts: 908
 

Whatever you choose making sure the transducer is installed correctly is as important IMO.



   
ReplyQuote
William McCann
(@werewolf0711)
Famed Member
Joined: 15 years ago
Posts: 3133
 

Whatever you choose making sure the transducer is installed correctly is as important IMO.

Ain't that the truth. Forgot about that. Had mine installed when I purchased the boat. I have a thru hull transducer. It was installed incorrectly and I hadn't paid any attention to it until it crapped out on us. You think professionals who install so many of these would know how to install them. I guess not or maybe I just got the rookie who didn't know to ask for help. Either way mine was installed arrow facing the front of the boat not the keel. When I replaced it with the new one I made sure it was installed properly and will check any and all for now on



   
ReplyQuote
Larry Rowland
(@lwr37)
Famed Member
Joined: 16 years ago
Posts: 2552
 

Whatever you choose making sure the transducer is installed correctly is as important IMO.

Ain't that the truth. Forgot about that. Had mine installed when I purchased the boat. I have a thru hull transducer. It was installed incorrectly and I hadn't paid any attention to it until it crapped out on us. You think professionals who install so many of these would know how to install them. I guess not or maybe I just got the rookie who didn't know to ask for help. Either way mine was installed arrow facing the front of the boat not the keel. When I replaced it with the new one I made sure it was installed properly and will check any and all for now on

What kind of "picture" did you get with the backwards facing ducer?
Fish arches?
bottom lock?



   
ReplyQuote
Page 1 / 2
Share: