SWC Forums

Pull up a chair...let's talk fishing.

Notifications
Clear all

FPT OFFSHORE Q&A

208 Posts
66 Users
0 Reactions
19.3 K Views
Justin
(@)
Reputable Member
Joined: 15 years ago
Posts: 241
 

I have seen it in EJW and Joe Shutes tackle in Morehead City and Atlantic Beach. Comes in a large spool, in a clear bag but has enough baby powder that it looks white.



   
ReplyQuote
Phillip
(@)
Noble Member
Joined: 16 years ago
Posts: 1267
 

Capt Joe's 2lb coil 22 bucks and its 28 bucks at chasing tails and im sure the same at ejw



   
ReplyQuote
David Lowder
(@)
Estimable Member
Joined: 13 years ago
Posts: 85
 

What kind of swivels or hardware are you pulling with the piano wire? Have always bought mine in black finish but guessing its not the proper choice.



   
ReplyQuote
clt_capt
(@clt_capt)
Estimable Member
Joined: 23 years ago
Posts: 124
 

Capt Joe's 2lb coil 22 bucks and its 28 bucks at chasing tails and im sure the same at ejw

Grab a coil, then some rainy day, sit down and break the entire coil into 18 ft lengths. Coil each leader, put in a plastic coffee can, add some talc - when you go to start rigging, just grab the leaders you need from the coffee can and twist away... Someone here gave me that tip a long time ago - and it is a definite time saver.



   
ReplyQuote
David Lowder
(@)
Estimable Member
Joined: 13 years ago
Posts: 85
 

What kind of swivels or hardware are you pulling with the piano wire? Have always bought mine in black finish but guessing its not the proper choice. , I have never used piano wire before and when I start, want to use the proper swivels.



   
ReplyQuote
todd skeen
(@chumbucket)
Noble Member
Joined: 16 years ago
Posts: 2117
 

Good question on the swivels reeldude :wtg: What say you Box? I'm guessing silver and small but strong. What brand/size do you like?



   
ReplyQuote
William McCann
(@werewolf0711)
Famed Member
Joined: 15 years ago
Posts: 3133
 

What kind of swivels or hardware are you pulling with the piano wire? Have always bought mine in black finish but guessing its not the proper choice.

If your talking on the leader itself he doesn't use any. It was said somewhere back in here. Black coast lock style on the rod/mainline itself best I recall!



   
ReplyQuote
todd skeen
(@chumbucket)
Noble Member
Joined: 16 years ago
Posts: 2117
 

I went back and read all of Box's responses. Might have missed it, but couldn't find comment on locking swivel brand/size.
I know the locking swivel gets connected directly to the haywire twist on the piano wire, no barrel swivel on the end of the piano wire. Is a barrel swivel used on the mono rigs for mahi or just connect the locking swivel to the crimped loop of mono?



   
ReplyQuote
tlp8280
(@)
Estimable Member
Joined: 19 years ago
Posts: 128
 

I went back and read all of Box's responses. Might have missed it, but couldn't find comment on locking swivel brand/size.
I know the locking swivel gets connected directly to the haywire twist on the piano wire, no barrel swivel on the end of the piano wire. Is a barrel swivel used on the mono rigs for mahi or just connect the locking swivel to the crimped loop of mono?

Crimped loop on mono rigs. When I make mine I leave the end open so I have the option to run them naked, or put whatever seawitch or skirt I want on the night before when rigging then just crimp the loop.



   
ReplyQuote
Clint Sanders
(@scooba)
Reputable Member
Joined: 18 years ago
Posts: 355
 

What we use....Swivels on 80lb mainline......Running these on the 50's....

Chum... Crimped loop on mono leader or Haywire loop on wire..swivels_108.jpg



   
ReplyQuote
David Lowder
(@)
Estimable Member
Joined: 13 years ago
Posts: 85
 

Box, I always appreciate you sharing your wisdom here! How long should my wire leaders be when fishing on a 25 center console?

Thanks

While my leaders are always 18 ft on the RunOff....I will spare you the pain and say 14 ft minimum.

The only time I use less than 18 ft is on my planer....planer wire leader is 6 feet. And there are reasons for all the above... :help: I I now understand 1 reason for longer leaders for mahi fishing first hand. Filled a empty spot on stackchasers crew and had a 20# mahi hit a 25 tld. Really wasn't my turn but the guy said go ahead and take it and it wore me out. Guess it was on 6' leader or so but we had the fish up close numerous times but not close enough to gaff. The capt est fight time was 20 min, which felt a lot longer. I'm almost 58 and on disability and 10 or 15 years ago I would have been ready for another long fight, but doubt, I could have decreased the fighting time for only a few min. Whereas if it was on an 18' leader, could have been wired to gaff much sooner. IMHO



   
ReplyQuote
AboutTime2Fish
(@abouttime2fish)
Prominent Member
Joined: 16 years ago
Posts: 744
 

Box - what knots do you use on your main lines both for trolling and bottom fishing? After numerous knot and crimp failures, I now use a Bimini twist on my trolling rods, and a San Diego jam knot on my bottom rigs. Neither has failed me....yet.



   
ReplyQuote
(@)
Noble Member
Joined: 19 years ago
Posts: 1125
Topic starter  

Guys my apologies for lack of answers....but I will answer all on the first blow day....We are doing a 57 day straight run so Im a bit frapped at the moment...

Piano wire in a bag:

Open bag....reach into bag and cut the wire tie with cutters...remove the wire "wraps ...there are two of them on a coil. DO NOT take the coil of wire from the bag. Close the bag back using one of the wire wraps. The tag end of the piano has a small white "price tag looking thing" on it....Now cut a five inch circle in the middle of your bag. Reach in and find your tag end which is labeled. That is the piece to work with.....lay the bag on the floor....now you can easily pull the lengths of wire from the bag with ease and not tangle it.

And to all you piano wire freaks, you are welcome! That's why I'm the BOX! ๐Ÿ™‚



   
ReplyQuote
Chris Zoubek
(@)
Famed Member
Joined: 17 years ago
Posts: 2585
 

Guys my apologies for lack of answers....but I will answer all on the first blow day....We arte doing a 57 day straight run so Im a but frapped at the moment...

Piano wire in a bag:

Open bag....reach into bag and cut the wire tie with cutters...remove the wire "wraps ...there are two of them on a coil. DO NOT take the coil of wire from the bag. Close the bag back using one of the wire wraps. The tag end of the piano has a small white "price tag looking thing" on it....Now cut a five inch circle in the middle of your bag. Reach in and find your tag end which is labeled. That is the piece to work with.....lay the bag on the floor....now you can easily pull the lengths of wire from the bag with ease and not tangle it.

And to all you piano wire freaks, you are welcome! That's why I'm the BOX! ๐Ÿ™‚

Head in hands.



   
ReplyQuote
Justin
(@)
Reputable Member
Joined: 15 years ago
Posts: 241
 

so i am sure i will get beat up for this one but i am ready. have to know the reason.

what is wrong with using springs on the pin rig? just gotta know. give me a solid reason and i will never buy one again.

(because BOX doesn't use them is an acceptable answer but curious if there is more to it...haha)



   
ReplyQuote
Page 12 / 14
Share: