Notifications
Clear all

failing engine tilt

5 Posts
4 Users
0 Reactions
8,106 Views
sandbox
(@)
Trusted Member Registered
Joined: 10 years ago
Posts: 47
Topic starter  

Have a pair of Yamaha 150's. After back from fishing I tilt the engines up all the way. The port engine. is slow and struggles to come up. The starboard engine is fine. I use the tilt while out but not all the way up. After lifting the motor up and down fully twice all the way at the dock, it is not slow and works as normal. But will do it again on next use.

Any tips appreciated. Is the tilt drive operated by a worm gear or just hydraulic or both? Could it be just low on some fluid on that one tilt or am I probably looking at tilt replacement of drive unit?
Thanks


   
Quote
Phillip
(@)
Noble Member Registered
Joined: 14 years ago
Posts: 1267
 

More than likely have a small leak mine is doing the same going to put new fluid and aee what happens


   
ReplyQuote
sandbox
(@)
Trusted Member Registered
Joined: 10 years ago
Posts: 47
Topic starter  

looks like there might be a screw on top of the ram unit to add fluid maybe. Is this where to put it in and what kind of fluid to use. Thanks


   
ReplyQuote
Randy Hoffman
(@)
Estimable Member Registered
Joined: 11 years ago
Posts: 192
 

looks like there might be a screw on top of the ram unit to add fluid maybe. Is this where to put it in and what kind of fluid to use. Thanks

That is where, yes. This is what you need:

http://www.simyamaha.com/Yamaha_Performance_Power_Trim_and_Tilt_Fluid_p/acc-pwrtr-mf-32.htm

Lots of youtube to help if you do a quick search.


   
ReplyQuote
Charles C
(@)
Trusted Member Registered
Joined: 14 years ago
Posts: 62
 

Don't neglect the grease fittings! Keep them greased. Without it they can seize up making movement hard to impossible and costly. Sounds like low fluid though.


   
ReplyQuote