SWC Forums
Pull up a chair...let's talk fishing.
If you are serious about bottom fishing, and anchoring up on a spot, you will mark your line (rode).
Here is how I do it, Hope it helps you guys!!!!!
MARKED EVERY 50 FEET

350 FEET

I carry 700feet of rope. Never use more than 350 feet for fishing. The rest is for riding out a storm or towing.
Good Luck,
Midnight
How much and what size chain chain do you use?
John,
Is that 175ft in the photo?
Dave
How much and what size chain chain do you use?
On a 25 foot boat I would use 20 ft of 5/8's chain, 1 spool - 500ft of rode.
I would cut that in half and make 2 250 ft rodes.
anchor....chain...swivel....swivel...rode.
Marks...
1 black =25
2 back = 50
3 black = 75
1 red = 100
1 red, 1 black = 125
1 red, 2 black = 150
1 red, 3 black = 175
2 red = 200
You get the idea.
Dave
How much and what size chain chain do you use?
20 ft. 5/8.
Good Luck
Plasti dip works well to mark it. I use 600' of 1/2, 20' 5/8" chain and a 17# danforth cut down to fit in my locker. I keep 300' loose and three 100' bundles wrapped up with a large ziptie. Anchor is reverse rigged with a shackel and zipties.
I also keep 150' and a 8# danforth and a reef hook coiled in a five gallon bucket in the console as a lunch hook.
Yes it is overkill for a 20' boat, but gas and anchor rode are two things I never want to be in lack of offshore.
Tim
John,
Is that 175ft in the photo?
Dave
Dave, 350 in the bottom pic. 1 red every 50 feet, 1 black every 100 feet..
Like your way too!!!!!!!!!!
Midnight
And another way is to weave in strands out of a black rope to mark it.Short, medium and a long mark.
And another way is to weave in strands out of a black rope to mark it.Short, medium and a long mark.
Meals, That works great, and I used to do it, but as you get older, and your eyes ain't theat great, I have found the paint works better.
Good Luck
I am with Midnight on this one...I want to be able to see it....not have to wonder what just went over the side.
Spray Paint works excellent.
Dave
PS....John, we are using the same idea...just different colors.
Heys guys, can you help me? I have been drifting while bottom fishing with just semi-ok results. I want to start anchoring. I have a 21ft boat and generally do not fish in more than 125 ft. What size chain, size anchor, and rode length should I be using? Thanks in advance.
Heys guys, can you help me? I have been drifting while bottom fishing with just semi-ok results. I want to start anchoring. I have a 21ft boat and generally do not fish in more than 125 ft. What size chain, size anchor, and rode length should I be using? Thanks in advance.
Hey Mpp, Not sure what you are targeting, but I found out a long time ago that when you are drifting espically when using meat for bait, you are spreading the school of fish out. I think you will do better, and like anchoring much better.
The key is to learn to anchor where your boat comes to rest excatly over where you want to be. It takes practice. Much easier to show you, than explain. Without going with you, here are a few tips I hope will help you:
For a 21 foot boat in that depth, I would prefer a 11 to 13# Danforth anchor with 15-20 feet of 5/8 inch chain, and 300-350 feet of 3/8-1/2 inch twisted nylon line. ( I would carry more for emergencies ).
When your sonar lights up and you decide to fish that spot, 1'st determine your drift course. Take into consideration wind and current. Mark your spot on your GPS. (MOB) Set your GPS to North up, not course up. If it is a ledge, ride around a little marking the ledge in several spots where you know which way it is running. Zoom in on your GPS to at least 50 feet, and ride back over your marked spot. When you are right over it, stop all forward movement of the boat. It may take throwing it into reverse, but try to stop exactly on top of your spot. Then do nothing for several minutes and see where you end up. Next ride back to your spot by watching your chart plotter. ( OK to hit "go to" if it helps you. Note your compass heading. This will give you your drift course and speed over the bottom. (faster speed= more scope) As you ride back over your spot, try and keep your compass heading as straight as you can. Keep going a little past your spot at least 75 feet depending on what the wind and currents are doing, stop and then drop the anchor. No need to "fling" it in, just drop it. Sometimes it helps to kick it in reverse a little to help the chain and anchor settle right. As you drift back towards your spot, cleat the line off before you reach your spot to let the anchor set and hold, and also get the bow out of your line. When it grabs and is holding, look at your GPS and see how close you are. Always can let out, or take in some line. Cleating it to one side of the bow or the other can help move you laterally a little. Personally, my goal is to come to rest within 10 feet or less of my marked waypoint. Helps to watch your GPS to make sure you aren't dragging the anchor, and it is holding right. Also in shifting winds, you may need to reposition. Here is where an anchor ball is a God send, or as you get more experienced "flying" the anchor ( a whole different subject ) comes into play. When first starting out, using a buoy dropped on your spot may help.
Here is a picture of an anchor ball I made for a friend. When using it, ALWAYS use the small yellow line to cleat the line to the stern so if it hangs on something, it will break and you will have the line coming from the bow, and not pull your transom under water. Also it helps keeping the line away from your prop.
I am better at showing than typing something out, but I hope this helps you out some.
Good Luck,
Midnight

Those are probably the best set of written directions you are going to get.


