SWC Forums

Pull up a chair...let's talk fishing.

Boat Detailing
 
Notifications
Clear all

Boat Detailing

21 Posts
12 Users
0 Reactions
47.7 K Views
Dalton Vanatta
(@vanatta22)
Honorable Member
Joined: 11 years ago
Posts: 363
Topic starter   [#52563]

Im not starting this post to cause any issues with anyone lol I just recently got my cape horn and it was in beautiful shape and I want to keep it that way. The the gel coat is in great condition with awesome reflection and no oxidation that I can see. My question is should I just put a polish and wax on it or a polish and wax. I have also heard of a cleaner wax......? I just detailed my other boat back here in a ohio before winterized. I did the whole process because it had some oxidation on it. I did put some Woodys wax on the non skid and almost all of the inside a couple weeks ago. I would like to do this at least twice a year to prevent having to do any oxidation removing. It may not be a brand new boat to me but it is new to me and I baby my toys lol I have used and familiar with a rotary buffer/polisher. Just want to know if there is anything special you guys do down there with the salt water! Thanks Guys!



   
Quote
Trampas Gray
(@gillraker)
Estimable Member
Joined: 13 years ago
Posts: 131
 

JJ’s boat service out of Southport. Been using them for the past two years. They do all my detail work on the lift and do a damn good job! They are getting read to put ceramic coating on my Grady. Can’t wait to see how it turns out



   
ReplyQuote
Dalton Vanatta
(@vanatta22)
Honorable Member
Joined: 11 years ago
Posts: 363
Topic starter  

I am going to do it myself. I just wanna know what you guys recommended for using on the boats down there. Just a polish and wax? or a cleaner wax?



   
ReplyQuote
steve arnold
(@steve-a)
Reputable Member
Joined: 21 years ago
Posts: 402
 

I think if you talk to 10 detailers, all 10 will tell you cleaner / wax is not the way to go. There is no shortcuts that work. A good quality wax is the way to go if your gelcoat is in good shape. I have been using Rejex, which I personally like, but there lots of good wax out there. Rejex is not a traditional wax but its works great for me.



   
ReplyQuote
Steve Pung
(@woodygo)
Reputable Member
Joined: 13 years ago
Posts: 298
 

Woody wax on the non-skid works great but doesn’t last very long. I re-apply about after every 2nd or 3rd third offshore trip. I use a good detailer for the hull. Collinite usually but last time he used a different polymer that has held up well.



   
ReplyQuote
John Workman
(@)
Noble Member
Joined: 21 years ago
Posts: 1030

   
ReplyQuote
Dalton Vanatta
(@vanatta22)
Honorable Member
Joined: 11 years ago
Posts: 363
Topic starter  

If I dont have any oxidation on the boat do I need the Heavy Compound???



   
ReplyQuote
steve arnold
(@steve-a)
Reputable Member
Joined: 21 years ago
Posts: 402
 

If you don't have oxidation on the gelcoat you don't need to compound at all.



   
ReplyQuote
Wesley Atkins
(@wampler24)
Prominent Member
Joined: 15 years ago
Posts: 715
 

Don't use compound unless needed and even then use with caution and care. I used many different waxes and all of them seemed to work great. Main thing is keeping it clean after the use. I had my boat for 6 years and waxed it 3 times total. Everything looked great the day I sold it with the exception of a few "my fault" things.



   
ReplyQuote
John Workman
(@)
Noble Member
Joined: 21 years ago
Posts: 1030
 

If I dont have any oxidation on the boat do I need the Heavy Compound???

Short answer, Probably. Your gelcoat is oxidised (probably very minor though)

Most compounds you will see are meant for auto or paint detailing so even a "heavy" compound isnt all that abrasive on gelcoat. I will always suggest getting a nice shine on your gelcoat before waxing it helps the wax last longer before you need to buff again. Just my $.02 it's worth hiring someone, they have the tools, experience, and back to get a buffer into everywhere.



   
ReplyQuote
Rich
 Rich
(@squid-row)
Illustrious Member
Joined: 22 years ago
Posts: 4097
 

I your gel coat is good, don't use a compound

Clean it and follow up with a good wax



   
ReplyQuote
Capt. Michael
(@sailormike)
Estimable Member
Joined: 14 years ago
Posts: 156
 

Rejex works great and if any of you need any I am a distributor for it.

Michael



   
ReplyQuote
Jay
 Jay
(@jays2000)
Trusted Member
Joined: 11 years ago
Posts: 50
 

I have been using collinite on the hull of my boat twice a year. Keeps it shiny and easy to clean with a wash mitt. I also found starbrite deck cleaner, used it this past weekend and wow what a difference! My wife even commented on how bright it was compared to the regular boat soap we were using
Like you it is my baby and a big investment so I am going to take care of it.

Wax link
https://www.autogeek.net/boat-wax--925.html?productid=boat-wax--925&channelid=BIZRA

Deck cleaner
https://www.amazon.com/Star-brite-Non-Skid-Cleaner-Gallon/dp/B0000C6HOI/ref=sr_1_4?ie=UTF8&qid=1512494701&sr=8-4&keywords=star+brite+ptef



   
ReplyQuote
Dalton Vanatta
(@vanatta22)
Honorable Member
Joined: 11 years ago
Posts: 363
Topic starter  

I have heard good things on Rejex as well as collinite. Collinite is sold at the marina where my boat is.



   
ReplyQuote
brian apple
(@)
Reputable Member
Joined: 21 years ago
Posts: 352
 

I put a thread in the boatyard section titled "thoughts on keeping gel coat looking perfect". This describes how, and what products I use on boats I take care of year round. Let me know if you have any questions.

Brian Apple
Restoration Boatworks



   
ReplyQuote
Page 1 / 2
Share: