SWC Forums
Pull up a chair...let's talk fishing.
With those 3 motors, I would gather that the 225 EFI merc would have a little bit better GPH then the 250. Just a little bit more motor can make a bigger difference in unburned fuel. If I had those 3 motors in the backyard, I would put the 225 EFI on, and if the 250 lower unit fits, I would put the 250 lower unit on the 225 for the gear ratio. However, the GPH would all depend on the prop and the gear ratio. Im just trying to keep you from getting sucked into the BUY YAMAHA ONLY posts that many people get sucked into.
Dave, you run 2 or 4 stoke Zukes? I may have a really sweet deal on a DT225 if it checks out. Concerned about cost of maintenance and repairs on the 2 stroke Suzuki. And I just see so many blown DT motors.
Went and looked at the mariner after work tonight. It was absolutely immaculate. Not exaggerating when I say it looked brand spanking new under the cowling.
I had a 224 for yrs.loved the boat,ran a 250 0x 66 worked great good milage,pushed the boat great.if you can find one at a good price,jump on it.and they are also bulletproof.goodluck!
If you want good fuel burn, the Mercury Optimax will be your best bet hands down. Your Mako was designed for a lighter weight motor (2 stroke). I am not saying that it won't perform well with a 4 stroke. The Optimax is a good engine, it had it's share of issues during it's early years, but they are as good as any other make now and will withstand corrosion better than any manufacture.
I have had many different makes of outboards, they all have their strong and weak points, but if fuel burn is your main concern, go Optimax.
200 suzuki's great out of the hole and good on gas
I have a 225 Opti on a 23 Sunbird WA, it averages around 3 mi per gallon at least, but will get considerably better if I back off the throttle a little. At wot on my boat it will burn around 22 gph. At 4000 rpm it will burn from 12 to 16 gph depending on sea conditions and current. I have been out 35 mi, trolled all day and ran back in on 35 gal. of fuel. the EFI may not be quite as efficient but it shouldn't be much different. I would go with the newer 250 EFI if it checked out, just my $.02 worth.
Well, lower unit troubles on one motor today. Need it in two weeks in Southport, so the urgency level just went up a little. Don't want to dump repair money into 28 year old motors.
Guess I'll be on the phone with more of my potentials after the holiday.
200 Opti for $2k...that one worries me with the too good to be true approach. Have to have it plugged up and checked out.
I own a 1998 250 EFI Merc and its by FAR the most powerful engine I've every owned, period. I have also put over 2100 hrs on it with a FEW MINOR repairs. Those Merc 3.0L blocks are workhorses, I wouldnt hesitate a one second to go with one of those, I guarantee you that you wil NEVER say, I wish I had LESS power!!!
I would not go with the three choices at all unless my funds were low and I just had to fish.Theres a lot of people who are not going to fish anymore because of the gas prices and getting rid of the boats and motors. Try Clarks at Atlantic Beach and see if they have a Evinrude that will work for you rather than going with your choices or paying forfour stroke.
yammy
Love my twin suzuki 2 strokes. The EFI makes them start as well as any car. If you are lucky to find a used DT 200 or 225 go for it.
Either of those EFi choices you listed would be fine.
I will add.....I run Yamaha ring free in my 2 strokes and it makes a differences. Carbon is a 2 stroke killer and this stuff keeps them clean.
Maintanence costs will be less on the 2 strokes than the 4. You don't need expensive valve adjustments that you cant do yourself.
I would not go with the three choices at all unless my funds were low and I just had to fish.Theres a lot of people who are not going to fish anymore because of the gas prices and getting rid of the boats and motors. Try Clarks at Atlantic Beach and see if they have a Evinrude that will work for you rather than going with your choices or paying forfour stroke.
Thanks, I'll try calling Clark's this week and see what they have. Due to funds a new 4 stroke or Etec is out of the question. For that matter, most used DI motors are out of the question too unless I find a real steal somewhere. Most of the DI motors in my price range are the typical DI problem years from all manufacturers anyways 99-02 era, and that *may* end up costing me more in the next couple years anyways...pending good checkups.
I MAY have a '98 Suzy DT225 EFI, 800 hrs (only asking $1500) pending compression check and getting my hands on controls.
Seems like it took a bit to get the pot stirred on something besides Yamahas, and thanks for all the opinions!
And for all the Yammy proponents, I haven't ruled one out. Just can't find one that's not beat to death that I can afford.
That Dt 225 is all you need. If it checks out go for it.
That Dt 225 is all you need. If it checks out go for it.
Compression came back to be 105-115 on all cylinders. Now I need to justify if it's worth the drive down to Beaufort, SC to get it, over the older Mariner in Greenville. Driving over tomorrow to check out the mid 90s Mariner 200 in Greenville that's been on CL for a long time.
What size are your DTs? I'm expecting the maintenance cost on the Suzy to be higher thanks to the 2 plugs per cylinder and being a Japanese made motor. Have you noticed yours being more costly to maintain or am I just making that up and overanalyzing? Is there a Suzy dealer in NC you get parts from or you having to order online?