SWC Forums

Pull up a chair...let's talk fishing.

Neep some opinions,...
 
Notifications
Clear all

Neep some opinions, suggestions, ideas, info or all of the above please!

24 Posts
15 Users
0 Reactions
49.1 K Views
Nick
 Nick
(@seapro180)
Honorable Member
Joined: 11 years ago
Posts: 543
Topic starter   [#52056]

Okay guys, here is where im at...

I have a 2280 winner cuddy sport. Its roughly 3800lbs dry/unequipped. It has a 225hp honda 4 stroke. weight is a little over 600lbs. Now add 650lbs of fuel and 600lbs worth of gear and passengers and im sitting right at 5650lbs loaded.

I have tried 2 different props for this motor so far and still have not found the right fit. The first prop was a honda prop 15.25x17 pitch. With this prop i could hit 5900rpm running at 48mph wot. However, i could barely get the thing on plane. It would not get on plane at all loaded going against heavy current. I had to turn woth the current just to get it to plane and even then it took a while. Couldnt have that! Second prop i tried was a honda 15.25x15 pitch. This would easily get me on plane in any condition loaded but top end speed dropped to 31mph on the best days at wot and thats only hitting 5000rpms. The vtech on these motors dont kick in until 5500rpms so basicly im only running on 200hp with this prop.

So, anyone have a honda 225 mounted on something similar in weight that your willing to give prop size on? Any recommendations on a prop to try? Props aint cheap so i dont want to keep buying props that dont work. So does anyone know of a place i can try before i buy? I brought my boat back to yadkin due to the hurricane (which i should have left in morehead) so i would like to keep places that will let me try before i buy somewhere reasonably close. Maybe somewhere around lake norman, high rock, blewes creek, badin lake, etc? Thanks in advance!



   
Quote
Jamie Blue
(@)
Famed Member
Joined: 20 years ago
Posts: 3660
 

Prop shop in Wilmington or Prop Gods in florida can help you out



   
ReplyQuote
Jack Evans
(@)
Estimable Member
Joined: 20 years ago
Posts: 178
 

Call Ken at PropGods.



   
ReplyQuote
David Plowden
(@mealonreels)
Prominent Member
Joined: 16 years ago
Posts: 652
 

The 17" would turn 5900 rpm and the 15" only 5000 rpm....Something is wrong with these numbers?



   
ReplyQuote
Barry Turano
(@barryturano)
Famed Member
Joined: 17 years ago
Posts: 2720
 

Prop shop in Wilmington. They will let you test as many as you want.Put in at Snows cut ramp, test the wheel pull the boat bring the prop back (not far from the ramp) get another and try again. Would work better if you have someone with you to run back and forth. PM me your phone number I have an idea.
Barry



   
ReplyQuote
Barry Carter
(@mtrmadman)
Reputable Member
Joined: 22 years ago
Posts: 294
 

Try US Propeller they have helped me in the past
They are at 77 and 115 above Mooresville
844 S Main St, Troutman, NC 28166
uspropellerservice.com
(704) 528-9515



   
ReplyQuote
Nick
 Nick
(@seapro180)
Honorable Member
Joined: 11 years ago
Posts: 543
Topic starter  

The 17" would turn 5900 rpm and the 15" only 5000 rpm....Something is wrong with these numbers?

Okay, your right....kinda. I know it sounds silly for the 15 pitch to turn less rpms than the 17 but this is correct. I just checked my notes again and looked at the prop on the boat which i know for a fact is only pushing me 5000 before the rev limiter kicks in because this is the one that gets me on plane easily and thats what i opted for incase seas got nasty and i needed to maneuver quickly.

The only thing i mixed up on the numbers was that the 15 pitch is a 15.8 diameter and not 15.25. The 17 pitch is also a 15 diameter and not 15.25.

Both props came with the boat when i bought it. They appear to be alluminum. I know, i know. I need stainless running in salt water but i figured i would use them for a season to make sure i liked the boat and was going to keep it before dropping a few hundred on a prop. The 17 pith which you can see in the pic looks like there were holes drilled at the base. There are three spaced evenly apart all the way around. It looks like this was something the previous owner did. Maybe for more grip?? Idk.

Also wondering if maybe the same size prop in stainless would perform differently than the alluminum of the same size and pitch. Never owned alluminum props for any boat so idk.20170910_093922_166.jpg20170910_093838_179.jpg



   
ReplyQuote
Barry Turano
(@barryturano)
Famed Member
Joined: 17 years ago
Posts: 2720
 

IF your problem is getting up on plane, look into a 4 blade prop. Will get up on plane faster, but you will lose a few top end rpm's. Start with the size and pitch that gives you max rpm's and speed use the same size and pitch in a 4 blade.



   
ReplyQuote
Barry Turano
(@barryturano)
Famed Member
Joined: 17 years ago
Posts: 2720
 

And yes stainless will give better performance because there is no metal "flex" like there is with aluminum.



   
ReplyQuote
Nick
 Nick
(@seapro180)
Honorable Member
Joined: 11 years ago
Posts: 543
Topic starter  

Thanks ill look into these places. Sent you a pm barry



   
ReplyQuote
Jim
 Jim
(@)
Noble Member
Joined: 21 years ago
Posts: 960
 

Bulls prop shop in Beaufort has let me try a few to get it right.



   
ReplyQuote
Glenn Gowdy
(@triplewhammy)
Trusted Member
Joined: 15 years ago
Posts: 63
 

Try this web site, it should give you an idea of your prop options.
http://v2.propellerwizard.com/
Make sure you give them all the info they ask for.
They also offer a free analysis.



   
ReplyQuote
Charlie
(@)
Reputable Member
Joined: 15 years ago
Posts: 403
 

Seapro

The local marine dealers in the Albemarle area used
Richard Hinson to repair, and or re-pitch props. He has
did many for me in the past, when I was trying to determine the right pitch. I have not used him in awhile but attached is
a link to his company. It is located about 2 miles from Lake Tillery just off hwy 24/27 at Greentop.
www.creekboats.com



   
ReplyQuote
zigzag
(@)
Noble Member
Joined: 22 years ago
Posts: 1863
 

Call Ken at PropGods.

second this



   
ReplyQuote
Nick
 Nick
(@seapro180)
Honorable Member
Joined: 11 years ago
Posts: 543
Topic starter  

Thank all of you for the suggestions and the ones that personally reached out to me to offer to help me in testing props out when i can make the trip down. Thats why this is the best forum on the internet in my opinion. Unfortunately ill be out of town for the next month so it will have to wait until i get back. If any still knows of anywhere to test them around the lake norman or piedmont area im all ears as well



   
ReplyQuote
Page 1 / 2
Share: