SWC Forums

Pull up a chair...let's talk fishing.

Penn 9/0 Senator on...
 
Notifications
Clear all

Penn 9/0 Senator on a Planer Rod

17 Posts
13 Users
0 Reactions
52 K Views
Rich
 Rich
(@squid-row)
Illustrious Member
Joined: 22 years ago
Posts: 4097
Topic starter   [#47114]

What would you spool up a Penn 9/0 Senator with if you planned to use it on a bent butt planer rod?



   
Quote
Josh Benton
(@)
Noble Member
Joined: 14 years ago
Posts: 841
 

Braid



   
ReplyQuote
James Crumpton
(@)
Estimable Member
Joined: 13 years ago
Posts: 166
 

braid or monel wire



   
ReplyQuote
Jamie Blue
(@)
Famed Member
Joined: 20 years ago
Posts: 3660
 

Braid. Same thing you would spool anything else up with for a planer reel.



   
ReplyQuote
Dan Rahe
(@)
Reputable Member
Joined: 21 years ago
Posts: 218
 

not enough drag for a big planer... i have tried one before. Also, lack of lever drag makes it hard to trip the planer as you can't get it out of gear under that much pressure.



   
ReplyQuote
Nathan
(@ntbrinkl)
Reputable Member
Joined: 13 years ago
Posts: 216
 

A guy at work made a 9/0 so there was no drag. I've seen pictures and he claims he catches a lot on it. Practically turns it to a winch. I don't see how it works without ripping their mouths off.



   
ReplyQuote
James Crumpton
(@)
Estimable Member
Joined: 13 years ago
Posts: 166
 

not enough drag for a big planer... i have tried one before. Also, lack of lever drag makes it hard to trip the planer as you can't get it out of gear under that much pressure.

Good point, for some reason I was thinking more on the lines of a high speed setup.



   
ReplyQuote
William McCann
(@werewolf0711)
Famed Member
Joined: 15 years ago
Posts: 3133
 

not enough drag for a big planer... i have tried one before. Also, lack of lever drag makes it hard to trip the planer as you can't get it out of gear under that much pressure.

What size planer are you talking? We run #8 all the time and I'm pretty sure it will hold that just fine. Not ideal but it will work



   
ReplyQuote
Glenn Gowdy
(@triplewhammy)
Trusted Member
Joined: 15 years ago
Posts: 63
 

Probably want to upgrade drag washers unless it already has them.

http://alantani.com/index.php?topic=12629.0

You using rubber band release or wind on?



   
ReplyQuote
Jamie Blue
(@)
Famed Member
Joined: 20 years ago
Posts: 3660
 

not enough drag for a big planer... i have tried one before. Also, lack of lever drag makes it hard to trip the planer as you can't get it out of gear under that much pressure.

Meh its almost got to the point where planer size has become a dick measuring contest



   
ReplyQuote
Dan Rahe
(@)
Reputable Member
Joined: 21 years ago
Posts: 218
 

not enough drag for a big planer... i have tried one before. Also, lack of lever drag makes it hard to trip the planer as you can't get it out of gear under that much pressure.

Meh its almost got to the point where planer size has become a dick measuring contest

Yup and mine is bigger....

I could really care less one way or the other what they guy fishes with, just trying to pass on some helpful information from someone who has actually used one as a planer rod. You can't really pull a 12 and if you do, you can't get it out of gear to trip it. been there, done that and i have a 9/0 on my workbench. If he wants to pull a 16, which is what we normally use, he is going to have problems.

Im sure he appreciates your post regarding junk size.



   
ReplyQuote
Will
 Will
(@porcha)
Prominent Member
Joined: 15 years ago
Posts: 657
 

you can just add another washer to the drag stack and achieve your drag needs

not as pretty as a LD but works



   
ReplyQuote
Forrest Owens
(@)
Estimable Member
Joined: 12 years ago
Posts: 105
 

I would like to start using a planer rod set up, I have a couple of 50Ts, what weight class bent rod would you recommend & would I run these (2) set-ups as my flat lines ? They are both spooled with brand new 80 # mono, could I get by with that or is braid a must ?
Thanks in advance,
Forrest



   
ReplyQuote
Dan Rahe
(@)
Reputable Member
Joined: 21 years ago
Posts: 218
 

I would like to start using a planer rod set up, I have a couple of 50Ts, what weight class bent rod would you recommend & would I run these (2) set-ups as my flat lines ? They are both spooled with brand new 80 # mono, could I get by with that or is braid a must ?
Thanks in advance,
Forrest

All of this is based on my experience and opinion.... i am not a professional mate...

You can use 50T's for up to a 12 probably. a 50wlrs or 80w is preferred. Braid is a must as the mono will be to stretched out under the pressure of the planer to trip it when you need to clear it or want to check a bait. Briad will also blow back less, letting you get deeper with the same size planer vs. mono. (The ability to trip the planer is a huge asset, and one of the big advantages of the in-line bridled system.) Also, spool the reel no more that 1/2 way full. This will effectively increase the drag at strike. 80# bent butts are preferable over anything heavier. (i have 100#+ rods and they are too heavy). I would only run one planer rod. you risk hellacious tangles if you try two, and one is plenty of work. If you want to fish a sub-surface bait on the other corner, a 16-24 oz trolling weight can be used very effectively.



   
ReplyQuote
James
(@)
Noble Member
Joined: 20 years ago
Posts: 908
 

I have used a 9/0 for years on a 8 and 12 planer. I like the 8 the best. Pulls great with a ballyhoo rig and is easier to trip to bring in. An 8 is pretty much what we use all the time.



   
ReplyQuote
Page 1 / 2
Share: