SWC Forums

Pull up a chair...let's talk fishing.

Planer rod question
 
Notifications
Clear all

Planer rod question

19 Posts
8 Users
0 Reactions
26.8 K Views
AboutTime2Fish
(@abouttime2fish)
Prominent Member
Joined: 16 years ago
Posts: 744
Topic starter   [#54601]

When I’m pulling a planer, the rod walks it’s way up the rod holder as the line pulls left and right. I’ve got a leash on it. Just wondering if anyone else has had that problem and if they were able to correct it.



   
Quote
steve arnold
(@steve-a)
Reputable Member
Joined: 21 years ago
Posts: 402
 

There is really no reason why a planer should do a lot of sideways movement from left to right if it's tracking properly. Sometimes you have to adjust the planer itself by bending it to get it to track straight. Trial and error.



   
ReplyQuote
Evan Pollard
(@evanp220)
Trusted Member
Joined: 16 years ago
Posts: 56
 

When I’m pulling a planer, the rod walks it’s way up the rod holder as the line pulls left and right. I’ve got a leash on it. Just wondering if anyone else has had that problem and if they were able to correct it.

swivel rod holder/insert or no?



   
ReplyQuote
Brad Honeycutt
(@cw66)
Honorable Member
Joined: 10 years ago
Posts: 659
 

X2 also happens if using short curved butt.



   
ReplyQuote
AboutTime2Fish
(@abouttime2fish)
Prominent Member
Joined: 16 years ago
Posts: 744
Topic starter  

It’s not a swivel rod holder. That would probably help a lot. Have thought of getting one of those drop in swivels but worried the holder won’t be deep enough then.

The back and forth movement comes from the autopilot corrections, maybe I need to play with those settings too.



   
ReplyQuote
Jamie Blue
(@)
Famed Member
Joined: 20 years ago
Posts: 3660
 

Does your planer rod have a swivel tip?



   
ReplyQuote
Brad Honeycutt
(@cw66)
Honorable Member
Joined: 10 years ago
Posts: 659
 

X2 also happens if using short curved butt.

what i was trying to say and failed was i use the drop-in swivel rod holder and have had no problems if using a long curved butt. My short butt is on a rod with a swivel tip.
swivel insert on short butt will work its way out running and/or fishing.



   
ReplyQuote
AboutTime2Fish
(@abouttime2fish)
Prominent Member
Joined: 16 years ago
Posts: 744
Topic starter  

Yes to a swivel tip, and it’s on a short butt.



   
ReplyQuote
AboutTime2Fish
(@abouttime2fish)
Prominent Member
Joined: 16 years ago
Posts: 744
Topic starter  

I guess I should add that it is a bent but rod in a 30 deg rod holder. Thinking maybe I should put in a 15 or 0 deg rod holder, or swap to a straight but??



   
ReplyQuote
steve arnold
(@steve-a)
Reputable Member
Joined: 21 years ago
Posts: 402
 

Yes, you need either a straight or 15 degree. A deep straight is better for bent butts.



   
ReplyQuote
Rodney
(@rkforte)
Noble Member
Joined: 14 years ago
Posts: 1072
 

I used a short bent butt with a swivel insert for a few years no with no issues. I was also using a 30 degree rod holder. I switched to a 15 degree Rod holder so I can see the bite on the planer rod better.



   
ReplyQuote
AboutTime2Fish
(@abouttime2fish)
Prominent Member
Joined: 16 years ago
Posts: 744
Topic starter  

I think I’ll be finding a spot to put a new rod holder just for the planer rod. Don’t want to replace the 30 deg because it works great for Spanish fishing, pulling surface baits, or my downrigger.

I’ll probably go with a 0 deg swivel holder, either Lee or CE Smith. And backing plate of course.



   
ReplyQuote
Rodney
(@rkforte)
Noble Member
Joined: 14 years ago
Posts: 1072
 

I think you will be fine with whatever you decide. Will you get the 0 degree with the swivel base? Or a swivel insert? I have the inserts.



   
ReplyQuote
AboutTime2Fish
(@abouttime2fish)
Prominent Member
Joined: 16 years ago
Posts: 744
Topic starter  

Going to add a 0 deg with swivel base. Need to crawl around and look at available space and access before I buy supplies.



   
ReplyQuote
warren barton
(@rockhound)
Noble Member
Joined: 19 years ago
Posts: 946
 

That short butt isnt engaging in the rod holder,Add an extension or take the rod holder out and move the screw up,Or add one to where it engages.I too have short butts on my planer rods,Same deal,Problem solved.



   
ReplyQuote
Page 1 / 2
Share: