SWC Forums
Pull up a chair...let's talk fishing.
I figure I would ask another question since this site has answered just about every other one I've had!!...anybody have input on a quality pressure washer for under $400? Thanks.
Craftsman 3000 psi with 7 hp Briggs is good for the honey do list.
House, deck, etc...
I have been through 3 of them in the last 9 years. All the ones in the 300-400 buck range are gonna last a few years then the compressor goes. I use mine for doing the deck, boat, house 2x year, etc. Finally broke down last year and bought a Dewalt from Home Depot for about $600. Ceramic compressor so supposed to last much longer. We'll see- doing fine 1 year later.
So long story short- if you anticipate needing a pressure washer for many years, spend the extra money now and get one made to last. The cheaper ones have about a 3 year shelf life in my experience.
Hope this helps
I have been through 3 of them in the last 9 years. All the ones in the 300-400 buck range are gonna last a few years then the compressor goes. I use mine for doing the deck, boat, house 2x year, etc. Finally broke down last year and bought a Dewalt from Home Depot for about $600. Ceramic compressor so supposed to last much longer. We'll see- doing fine 1 year later.
So long story short- if you anticipate needing a pressure washer for many years, spend the extra money now and get one made to last. The cheaper ones have about a 3 year shelf life in my experience.
Hope this helps
yep that's exactly what I've been hearing..the brass and ceramic pumps seem to last longer...
Craftsman is what I have but make sure you fog your motor before storing it and fill it up with gas and gas treatment as well,only problem I had was some trash got into carburetor but it was the easiest one I ever took apart to clean. Get one with different nozzles instead of one that has one on wand.
Mom gave me one from Lowe's about 10 years ago, it is a Generac brand. It has a Honda 5hp motor and it's 2100-2300 psi I think. Have used it to wash all the cars, boats, house, and whatever else I needed with absolutely no issues.
Back then it was about $400 but they have come down in price since then. I would not have a problem with getting another one like it for home use.
Buy one that has the Cat pump. It will be blue. That is what most commercial washers will have.
Go over to ICE on Carolina Beach road and check em out, and never ever run clorox or corrosive chemicals through a pressure washer it will destroy the pump.
Pay more attention to the GPM than the PSI.
Never run chemicals thru the PW. Use a back pack sprayer or pump up sprayer to apply the chemicals and the PW is just to rinse it off.
If you can spring for a honda (red) or Briggs (Vanguard) motor, do so as that is the "commercial" models and will last much longer.
Steer clear of Tecumseh motors as they are notorious for getting water in the top end and locking up.
As for pumps, there are several brands, Cat is one of the more popular ones but expensive to repair. I usually lean towards General as they are a great pump and much cheaper to get parts for. Cats tend to cost more on labor also for repairs than General.
If you can get a 3gpm / 3000 psi, that is all you need. Doing anything more for an occasional use is a HUGE waste of money.
One of my companies in Cht was a PW company for 10 yrs. There are a TON of tricks you can use for cleaning.
One thing you don't want to do is turn up the pressure to "blow" the surface clean, you will only damage the substrate, doesn't matter if it is concrete, siding, shingles, brick, wood....... whatever.
You want to keep the pressure below 3 k and turn the water volume (gallons per minute) as high as you can.
You are RINSING with the PW, nothing more. The cleaners applied are doing the work, not the PW.
I will pay much more for a 5 gpm 3000 psi pump than a 3 gpm pump that is 6000 psi.
Higher GPM is what you want, not PSI. As a norm, all of my pumps are set around 2,700 - 2,800 psi and my big pumps adjust to up over 6,000+ with 6 gpm ....
Call me if you want help on applications or other questions.
Craig
910-209-2920
Thanks craig...I end up finding a 2.6 gpm 3000 psi (briggs motor) and it seems to be a stout little machine...at least for what I'm using it for. Do you have any suggestions for getting rid of chalky oxidation from vinyl siding? Thanks a lot.
They sell stuff at Lowes in the paint section called Jomax. Use it on my siding and vinyl fence. Works on that oxidation, mildew, bird crap, you name it. Mixes with water and bleach. I spray it on with a backpack sprayer and hose it off. Works so good part of the time I don't even use the pressure washer, just the garden hose. Give it a try.
I don't like Jomax personally because it tries to leave a film on the surface and doesn't penetrate quite as well. I also don't like having to mix BLEACH or relying on my workers to get it right.
Go to Lowes and buy yourself a 2 1/2 gallon container of Olympic Deck Cleaner, it is a cream bottle with a black / green / red label.
Mix 50 % cleaner / 50 % water in your pump up sprayer.
Spray it on the DRY siding starting DOWN LOW.... at the GROUND.... BOTTOM OF THE WALL ....... going horizontally and working up. ( stops cleaner streaks) to the top of the wall.
Wait 10 minutes and then rinse the siding off with a WIDE fan tip ( usually a green tip ).
Don't get closer than 8 " or so, no need to. I always rinse the wall 2 times, probably not necessary just a habit I started years ago.
Your jaw will drop when the siding looks like BRAND NEW before you rinse it.
Rinse from the TOP down, this will insure all cleaner is removed.
FWIW, this works GREAT on boat cleanup and blood after a fishing trip. Spray the cockpit while it is DRY with the cleaner, hit it real quick with a deck brush, let it sit for 10 minutes and then rinse with water, boat looks new.
Will clean your wood deck, concrete, shingles, fiberglass, etc.
Spray a stinking fish cooler, close the lid and let is sit for a few hours and SHAZAM ....
I can't live without 3 jugs in my shop.
Call with questions.
910-209-2920
Killer, does the Olympic cleaner take rust stains off the vinyl from irrigation hitting it? No matter how i adjust the head the wind tends to blow the spray on the house and leave a rust stain over a period of time. You say dry siding but I'm assuming vinyl is what your referring. Thanks.
To remove the stains go to Ace Hardware and buy "Snow Cap" mix it and use a pump sprayer. The rust stains come right off. I use it on my house. I get stains from my irrigation system because I water with well water and it has iron in it.