SWC Forums

Pull up a chair...let's talk fishing.

Releasing bottom fi...
 
Notifications
Clear all

Releasing bottom fish

56 Posts
26 Users
0 Reactions
124.9 K Views
Bruce
(@)
Estimable Member
Joined: 12 years ago
Posts: 138
 

How much weight do you typically use with the SeaQualizer?



   
ReplyQuote
Chris McCaffity
(@)
Noble Member
Joined: 15 years ago
Posts: 1424
 

How much weight do you typically use with the SeaQualizer?

It depends on the fish and how bloated they are. It seems to average about 1 pound of lead per 7 pounds of fish. We have a SeaQualizer rigged with a 2 pound lead and add more if needed. Having one ready to snap on makes it easier to use more often and gets the fish home faster. Please think about letting the SAFMC know if you use a descending device. No need to keep it secret, especially if it can help us keep some Red Snapper.



   
ReplyQuote
Bruce
(@)
Estimable Member
Joined: 12 years ago
Posts: 138
 

This looks like a viable alternative to the SeaQualizer. I tend to lean toward the KISS principal. :wtg:

https://www.youtube.com/watch?v=oB6oNolIq8g
https://sites.google.com/site/descendingdevice/safe_release_weight/product-information



   
ReplyQuote
Chris McCaffity
(@)
Noble Member
Joined: 15 years ago
Posts: 1424
 

This looks like a viable alternative to the SeaQualizer. I tend to lean toward the KISS principal. :wtg:

https://www.youtube.com/watch?v=oB6oNolIq8g

Haven't seen those around here. A barbless hook through the lip skin works too. Just send it to the bottom and give it some slack so the fish shakes the hook out. You can give a quick jerk to tear the skin it doesn't shake the hook. The fish is better off with a hairlip than floating off. The Pacific Fishery Management Council reduced discard mortality rates and increased quotas for some fish based on voluntary use of descending devices. The SAFMC could do the same if enough of us asked them to.



   
ReplyQuote
Chase Kneip
(@)
Trusted Member
Joined: 11 years ago
Posts: 39
 

It shows it after you hit submit, or at least it did on mine. Try it again, if you end up with 2 give one to someone else

Did you use the first link in this post or the second one? I have been trying the first link. Maybe its my computer here at work.



   
ReplyQuote
Jeff Thomas
(@paynefish)
Honorable Member
Joined: 12 years ago
Posts: 669
Topic starter  

It shows it after you hit submit, or at least it did on mine. Try it again, if you end up with 2 give one to someone else

Did you use the first link in this post or the second one? I have been trying the first link. Maybe its my computer here at work.



   
ReplyQuote
Jeff Thomas
(@paynefish)
Honorable Member
Joined: 12 years ago
Posts: 669
Topic starter  

It shows it after you hit submit, or at least it did on mine. Try it again, if you end up with 2 give one to someone else

Did you use the first link in this post or the second one? I have been trying the first link. Maybe its my computer here at work.

1st one



   
ReplyQuote
Chase Kneip
(@)
Trusted Member
Joined: 11 years ago
Posts: 39
 

Thanks, Must have been my work computer not letting me submit it. Be here in 8-12 days



   
ReplyQuote
Chris McCaffity
(@)
Noble Member
Joined: 15 years ago
Posts: 1424
 

We successfully released about a 100 pound Goliath Grouper using a Seaqualizer and over 10 pounds of weight. It was a beautiful fish that would have died if we let it float off. Please consider sharing your stories about releasing bloated fish with descending devices to educate and encourage others. It would be great to see some reports from charter captains.



   
ReplyQuote
dusky
(@dusky)
Estimable Member
Joined: 20 years ago
Posts: 149
 

Thanks for posting the link. Have mine on the way also.



   
ReplyQuote
Dale A. Tycast
(@toad)
Prominent Member
Joined: 18 years ago
Posts: 722
 

Don't know if this will still work, but I got one for free here....

https://www.takemefishing.org/how-to-fish/how-to-catch-fish/seaqualizer/seaqualizer-signup/

Tried twice with no luck a few months back. Think the free time is over.[/q
uote]

Same here, tried this a few times and have not received any yet. I think it's over. I will buy one.



   
ReplyQuote
Chris McCaffity
(@)
Noble Member
Joined: 15 years ago
Posts: 1424
 

Has anyone else used their SeaQualizer? We released several Red Snapper last trip that could swim without help and one that would have floated off and died without it.

Our goal should be to make regulatory discards rare while taking practical steps to make sure released fish survive.



   
ReplyQuote
todd skeen
(@chumbucket)
Noble Member
Joined: 16 years ago
Posts: 2117
 

How much weight do you typically use with the SeaQualizer?

It depends on the fish and how bloated they are. It seems to average about 1 pound of lead per 7 pounds of fish. We have a SeaQualizer rigged with a 2 pound lead and add more if needed. Having one ready to snap on makes it easier to use more often and gets the fish home faster. Please think about letting the SAFMC know if you use a descending device. No need to keep it secret, especially if it can help us keep some Red Snapper.

You can get away with less weight most of the time. I'm usually using a 12 or 16 ounce bank sinker when fishing. I just hook the seaqualizer and fish to my line and drop it down. Works fine unless really big/bloated fish (like a big AJ). No need to keep a separate rod with heavier weight around for short grouper, average 10-15# ARS, etc.



   
ReplyQuote
David Bergemann
(@)
Estimable Member
Joined: 15 years ago
Posts: 110
 

Don't know if this will still work, but I got one for free here....

https://www.takemefishing.org/how-to-fish/how-to-catch-fish/seaqualizer/seaqualizer-signup/

Tried twice with no luck a few months back. Think the free time is over.[/q
uote]

Same here, tried this a few times and have not received any yet. I think it's over. I will buy one.



   
ReplyQuote
David Bergemann
(@)
Estimable Member
Joined: 15 years ago
Posts: 110
 

I ordered and received one from the above link. Once you see it (don't have pic with me), you'll see that you could easily make one from a coat hanger. The one i received was made from stainless wire, but other material would work in a pinch.



   
ReplyQuote
Page 3 / 4
Share: