SWC Forums
Pull up a chair...let's talk fishing.
I'm more of a bottom fisherman, but would like to do more trolling this year in my 24' CC ("more" is starting to mean "some" given the conditions!!).
Typically I pull 4 lines: two outside lines on 'fish-stix' (which is sort of poor man's outrigger), and two on the transom: one short, and and one on a #1 planer. Running ballyhoo on all usually behind a blue-white or pink or green/yellow sea-witch.
It seems to work, in that I've generally caught dolphin, where some are to be caught. But I don't think I've ever had anything but a 'cuda on the planer. I suppose I could replace the 'hoo with a drone spoon on the planer, and increase the likelihood of a king, but I'm weird in that I'd just assume NOT catch kings: I'd like dolphin, blackfins, and wahoo...
Any thoughts on how I could improve or change up my spread? I just bought a cedar plug, so might try that too. The "fish-stix" don't get the outside lines that far from the center of the wake, which is why I've typically been running 3 lines on the surface, and one below.
thx!
if the fish-stix are like outrovers - (in-line attachments with a keel that pull baits out to side)...we generally didn't have much luck with them. We did better once we sucked it up and got full on outriggers.
The planer does attract cudas, but I'd guess the reason you're getting more of those than the other stuff is because of where you're fishing. If you're circling over wrecks, that's what's going to happen.
you could prob get away with a shotgun way back as high up as you could get it. you are able to pull a ballyhoo on a #1 planer? I would say that our planer gets hit more times than all of the surface lines. I would get a bigger planer like a 10 or 16 and get that dialed in.
Outriggers are more than just spreading the baits out. They pull up on them providing the skipping action that can attract bites. They are worth the investment.
@Bilzo -- it's actually Fish Stixx: https://www.facebook.com/Fish-Stixx-276815142381992/
I wonder if they still sell them? I bought 'em in MHC -- they do seem to work but I'm sure 'real' outriggers work better.
@Wildlifer -- the planer I'm talking about is a small one -- the same size you'd use for Spanish. It runs the bait maybe 15' under? The ballyhoo seems to stay on just fine: why would you recommend going so much larger? And with what bait? Thx
Plenty of fish besides kings will hit drones. I've caught everything from tuna to grouper on spoons behind planers and yes they do slay the kings. If can't pull a big planer like wildlifer mentions try a #3 or 4.
@Bilzo -- it's actually Fish Stixx: https://www.facebook.com/Fish-Stixx-276815142381992/
I wonder if they still sell them? I bought 'em in MHC -- they do seem to work but I'm sure 'real' outriggers work better.
@Wildlifer -- the planer I'm talking about is a small one -- the same size you'd use for Spanish. It runs the bait maybe 15' under? The ballyhoo seems to stay on just fine: why would you recommend going so much larger? And with what bait? Thx
I'm a little surprised the planer will hold it without tripping.
Typically we target wahoo and blackfins around 180-200 feet of water around the break out of Wrightsville. Wahoo seem to prefer to hold in the middle of the water column, we frequently mark them at 80-100 before picking up a bite. Dragging a bait right in front them them works better than trying to entice them to the surface. I think the noise and vibration a planer of that size makes gets them to look too. A lot of times we will pick one up on the planer and slow down and circle to get the fish in, the outrigger will get hit after its had a chance to sink down 20' or so.
Another option is to pull a maurader, yo-zuri bonito, or stretch 30
If you have the rod/reel to handle a big planer (and a backing plate under your gunwale!) get it set up inline so you can get your bait further back and dont have to handline the fish in.
Flat line clip on your short?
Definitely add a Way Way Back, Cedar plug works good.
Trolling weight, inline or fixed? Trolling weight and drone is a good combo.
Mix up some lures, those little rubber chugger or jet heads run naked seem to do well for Mahi off your outriggers.
So with a large planer, a dedicated rod? Or hand-line off the cleat? I've seem some pictures of then running the bait down with a separate rod with a swivel and rubber band, though this is sounding like more stuff underfoot in a small boat. But is this what you're talking about? You don't actually run the leader to the planer as you would for spanish, I'm guessing....
I love the Yozuri Crystal deep-divers, but have to troll those very, very slowly or else they become unset.
So maybe: 3 ballyhoo on seawitches, something (drone spoon?) on a planer, and a way-back cedar plug, which I can fish from the center launcher on the T-top. Hopefully, if I stagger a bit, I can avoid tangles.
I love it when i hear "small boat" when talking 26ft or smaller. I had an 18ft cc that seen the stream and big rock more times than i can count. Always pulled 6 lines from it comfortably without tangles. 4 off transom...(port corner had a #3 planer, starboard corner had a #8 planer ran off the cleat, port middle on the transom was a wfb rod and starboard middle transom was in the prop wash. The next 2 rod holders ( one on each side of the boat) from the back corners had islanders and or seawitches.
I now have a 23ft walkaround that has seen its fair share of stream trips and will continue to see it. I pull 8 rods from it comfortably with NO OUTRIGGERS. Same setup as above but with 2 more rods. They are in rod holders clamped on to the bow rails about mid ways up the boat on each side. They are pointed upward around 30 degrees with the water. By having them pointing out and up, its almost like short outriggers. Never had a problem with tangles. Stager them right and you will have no problem adding more options to your spread.
As far as wahoo goes. You need to get deeper as mentioned above. Yes the can, have, and will continue to hit baits on or near the surface but for a more consistant bite your minimum size planer should be a #8. Your witches will catch tuna as well and definitely the cedar plug. But if its consistency your after or are specifically targeting tuna you need to invest in some fluorocarbon line. They can and generally are veey leader shy.
So with a large planer, a dedicated rod? Or hand-line off the cleat? I've seem some pictures of then running the bait down with a separate rod with a swivel and rubber band, though this is sounding like more stuff underfoot in a small boat. But is this what you're talking about? You don't actually run the leader to the planer as you would for spanish, I'm guessing....
I love the Yozuri Crystal deep-divers, but have to troll those very, very slowly or else they become unset.
So maybe: 3 ballyhoo on seawitches, something (drone spoon?) on a planer, and a way-back cedar plug, which I can fish from the center launcher on the T-top. Hopefully, if I stagger a bit, I can avoid tangles.
Invest in a dedicated planer rod with a bridal. Run 100 feet or so of line after the bridal. That's by far the least cluttered way to run it. A handline would be impossible to trip without stopping the boat. They a pulling something like 50lbs at the rod tip. It's not a cheap set up but it absolutely will get more bites.
I run my planer of corner cleat and use plastic shower curtain rings. Rubber band on your line, clip the ring around it and the planer line and send it down. Planer doesn't come up until we're done.
Suggest longer leader on planers offshore. I run a bridle with 100' of leader behind the planer.
Catch more fish n the planer than all other lines combined.
Thx all. I had no idea what a 'bridle' meant, but did some searching, and think I understand: this lets you remove the planer from the line, when you reel up to it, right?
What kind of rod and reel is necessary to handle a #8 planer? Yikes.
I may start with the shower-curtain/cleat trick. At least that way I can use a rod I already have. How much line do you allow before attaching the rubber band? 50' or so? And typically what do you run down there? A drone spoon? Thx
Thx all. I had no idea what a 'bridle' meant, but did some searching, and think I understand: this lets you remove the planer from the line, when you reel up to it, right?
What kind of rod and reel is necessary to handle a #8 planer? Yikes.
I may start with the shower-curtain/cleat trick. At least that way I can use a rod I already have. How much line do you allow before attaching the rubber band? 50' or so? And typically what do you run down there? A drone spoon? Thx
I've used a drone spoon, pirate plug/bwc rig with cigar minnow, naked hoo on a pin rig. I've caught something on all of them at one point or another. Usually drop back 75' or so. I'm not an expert by any means and started doing this since I don't have a big dedicated planer rod and wanted to run one of the big planers to get my baits down. It really works well. The downside is you do have to stop the boat if you want to get the planer in if you think it will be in the way bringing something in. Unless you're superman.
Thx all. I had no idea what a 'bridle' meant, but did some searching, and think I understand: this lets you remove the planer from the line, when you reel up to it, right?
What kind of rod and reel is necessary to handle a #8 planer? Yikes.
I may start with the shower-curtain/cleat trick. At least that way I can use a rod I already have. How much line do you allow before attaching the rubber band? 50' or so? And typically what do you run down there? A drone spoon? Thx
Correct, the bridle is just 2 loops in the line. They can be dacron with dropper loops or simply 2 short sections of mono crimped to the leader to make 2 loops. The spacing of the loops is the most important part. You are basically just making a slack section in the line to allow the planer to trip. On the planer side you crimp on 2 clip with a short section of mono or wire.
A 50 sized reel half spooled with braid should be able to handle a #8
we pull sea witches behind ours, a chugger head behind one sounds odd but is has great action behind a planer.