SWC Forums

Pull up a chair...let's talk fishing.

trollimg whole squi...
 
Notifications
Clear all

trollimg whole squid for wahoo?

22 Posts
15 Users
0 Reactions
58.5 K Views
Nick
 Nick
(@seapro180)
Honorable Member
Joined: 11 years ago
Posts: 543
Topic starter   [#49837]

Okay, so I have pretty much drifted away from ballyhoo and have started pulling whole squid behind islanders, sea witches, etc. Mainly because I can rig a squid about as fast as a ballyhoo, I have actually caught just as many if not more fish (dolphin, tuna, sails, etc) on whole squid as opposed to ballyhoo. I can get a 5lb box of whole squid for a little more than the price of one pack of ballyhoo and have enough to troll all day and cut some up for chunking. There has been many occasions where fish have blown past a rigged hoo and ate a squid instead. needless to say, im sold. However, I always have a pack of hoos to rig up on the planers for wahoo. I have never put a squid down deep specifically to target wahoo since I have never heard of anyone using squid for them. So my question is, could I use squid down deep for them and have just as much luck or should I stick with ballyhoo? Thanks in advance!



   
Quote
Barry Turano
(@barryturano)
Famed Member
Joined: 17 years ago
Posts: 2720
 

Everything will eat squid.



   
ReplyQuote
Vic
 Vic
(@vic)
Estimable Member
Joined: 19 years ago
Posts: 169
 

Seapro, how are you rigging your squid? I have thought about using squid in the past but the time it takes has been the deterrent factor.



   
ReplyQuote
Brad Honeycutt
(@cw66)
Honorable Member
Joined: 10 years ago
Posts: 659
 

not to kill your reply for advice, but I too am curious to know more about the Squid rigging/trolling.



   
ReplyQuote
John Gann
(@ab1620)
Honorable Member
Joined: 15 years ago
Posts: 616
 

Fish with an old timer that used to do it all the time. He hasn't done it since I've been fishing with him but I'll see what he says about rigging it.



   
ReplyQuote
BRIAN
(@bharbaugh)
Prominent Member
Joined: 19 years ago
Posts: 687
 

I troll them on pirate plugs and make a wire rig so I can put the main hook in the very top of the mantle and the treble in the thick head/eyeball area.



   
ReplyQuote
Stuart Ussery
(@lookintohookem)
Honorable Member
Joined: 13 years ago
Posts: 701
 

Like Barry said, EVERYTHING likes squid. Try them with Barefoot's chin weights...quick and deadly. :wtg:



   
ReplyQuote
Nick
 Nick
(@seapro180)
Honorable Member
Joined: 11 years ago
Posts: 543
Topic starter  

Seapro, how are you rigging your squid? I have thought about using squid in the past but the time it takes has been the deterrent factor.

not to kill your reply for advice, but I too am curious to know more about the Squid rigging/trolling.

Here is a video I made of rigging squid. Im no professional at making videos by any means and just threw this video together last night for you guys as I am not very good at explaining and learn better by seeing than reading. so I hope it helps. Please feel free to ask any questions and I will try to answer as best I can. I really think you will like pulling them as you never have to worry about them spinning or washing out. you can literally troll them all day long and they will look just like they did when you put them on the hook. (though, if there is fish around, they wont stay in the water long before getting eaten.) Its the bait for everything. the money you save on using them over hoos can go towards a fish here map! I have NEVER had one spin, bunch up, or fall apart on me using this method. once you put them in the water you can forget about them and not worry about checking them.

The one thing I did leave out in the video is that if you plan on using one as a skipping bait or behind a chugger or anything on top, is to use a bead instead of weight so it wont sink down any. just make sure its a fairly decent size bead as the main purpose of the bead/weight is to keep the squid from slidding down the line and bunching up. I bought 500 wood beads about 1/2 inch in diameter from walmart in the craft section for like 50 cents. Anyway, here is the video... https://vimeo.com/192774691



   
ReplyQuote
Jim Burch
(@)
Active Member
Joined: 12 years ago
Posts: 16
 

I have used multi-strand wire for the same type rigging you show. Push it through and then tie a figure 8 knot to a barrel swivel and you are ready to go. You can use a skirt, king duster, or leave it naked. Great bait for kings and will troll perfect at all speeds without a whole lot of trouble.



   
ReplyQuote
Ratical
(@)
Estimable Member
Joined: 14 years ago
Posts: 88
 

I think this was said a couple times throughout this post anything will eat a squid….. I totally agree!!!!!!!
I to have been trolling whole squid for years it’s easy and cheap!!!!!! Take the eyes off an islander and what does it look like????? A Squid!!!!!!!!
All that said I’ve caught lots of wahoo over the yrs., and to this day fish with a great wahoo fisherman. I can say I’ve never observed with my own eyes a squid in a wahoo’s belly and believe u me, I always look.

What I have observed is other fish like black fin, kings, dolphin and flying fish but never squid….

So with that said id probably keep some horse ballyhoo or rigged spanish in the boat to pull!!!!



   
ReplyQuote
Brad Honeycutt
(@cw66)
Honorable Member
Joined: 10 years ago
Posts: 659
 

Thanks for the video Seapro.



   
ReplyQuote
Jamie Blue
(@)
Famed Member
Joined: 20 years ago
Posts: 3660
 

Neat video.

A) doesn't work if you use wind on leaders and B) I don't trust a surgeon's loop on a big fish. A crimped loop would be much better. I'd also use a crimp and bead instead of a rubber band for you spacer.

Also, how long does it take y'all to rig a bally if running the leader through and re tying every time is faster?



   
ReplyQuote
JOHNNY CARPENTER
(@)
Noble Member
Joined: 14 years ago
Posts: 1169
 

I like it. Rubber band makes it adjustable and simple. I'll be trying it this spring on the mahi. :wtg:



   
ReplyQuote
Vic
 Vic
(@vic)
Estimable Member
Joined: 19 years ago
Posts: 169
 

Thanks for taking the time to make video, Seapro.



   
ReplyQuote
Nick
 Nick
(@seapro180)
Honorable Member
Joined: 11 years ago
Posts: 543
Topic starter  

Neat video.

A) doesn't work if you use wind on leaders and B) I don't trust a surgeon's loop on a big fish. A crimped loop would be much better. I'd also use a crimp and bead instead of a rubber band for you spacer.

Also, how long does it take y'all to rig a bally if running the leader through and re tying every time is faster?[/qruote]

Obviously, the first couple times you do it it may take a little longer. Like i said, i can do it in about 30 seconds or less. How long does it take to simply slide a skirt on/off a leader and tie a knot??? Thats all your doing. dont care who you are or how fast you can rig a hoo, you cant rig a hoo much faster. Id say by any standards 30 seconds is pretty good time at rigging a bait. The way the squid rig is tied your essentially turning the whole squid in to a skirt. You simply slide the squid on your leader just as you would a sea witch and hook it. Its that simple.

Why would you take more time to use a crimp and bead? It is just that...a spacer. The rubber band will not slip and has never slipped unless purposely moved to accommodate a larger or smaller squid and is much cheaper. It also needs to be adjustable as your squid aren't all the same sizes.

There are more knots than a surgeons knot to tie your loop. A figure 8 works well too. However, i have never lost a single fish (dolphin, wahoo, sails, or numers sharks over 200#'s) tying it. Its quick, it has been very effective and reliable so ill stick with it. I do agree that a crimped loop will ALWAWS be better than tying any knot, but that cuts out time and no wahoo, tuna, dolphin, or sail that swims in the ocean will slip a properly tied surgeon knot. If i decide to take up fishing for marlin or giant bluefin...ill crimp just to be sure. To each there own.



   
ReplyQuote
Page 1 / 2
Share: