SWC Forums

Pull up a chair...let's talk fishing.

Notifications
Clear all

Bottom coating

8 Posts
6 Users
0 Reactions
520 Views
Charles C
(@)
Trusted Member
Joined: 16 years ago
Posts: 62
Topic starter   [#38170]

Hope someone will help me out with my question here reguarding bottom paint. I'd like to remove it since I don't leave my boat in the water and my thinking is it would go through the water with less resistance. Any suggestion will be appreciated. Also what the cost might be. It's a 22 foot SeaCat.. Thanks in advance!



   
Quote
Jack Evans
(@)
Estimable Member
Joined: 20 years ago
Posts: 178
 

Pappy,
You should be able to get it farro blasted for around $1000-$1200.
My 24 ft DC cost $1400.



   
ReplyQuote
Bryan Williams
(@squid)
Estimable Member
Joined: 22 years ago
Posts: 160
 

As gypysgirl mentioned, Farrow blasting is the way to go. I had my 21' Contender done last year and makes all the difference in the world. Honestly, you won't notice a lot of performance difference however the cosmetic difference is substantial. Check out the before and after pictures of my boat below. Adam Brown is in Wilmington and can take care of blasting and painting for you. His number is 910-264-1496. If you have any further questions, feel free to ask.

Before:

After:



   
ReplyQuote
Rich
 Rich
(@squid-row)
Illustrious Member
Joined: 22 years ago
Posts: 4097
 

I bought my boat in 2004 and the previous owner had applied an ugly green bottom paint.

I had it soda blasted off and then put a single coat back on to protect the hull

End result saw a nearly 20% improvement in performance. Turns out the previous owner that had the boat for 10 years prior to me buying it just kept putting two new coats of paint on each year, without ever taking the old off! So she had roughly 20 coats of paint on her... what a difference!

The soda blasting cost $600 back in 2008 or 2009



   
ReplyQuote
Charles C
(@)
Trusted Member
Joined: 16 years ago
Posts: 62
Topic starter  

Thanks all for the advice! Not hard to see it makes an impressive difference. That alone may make my mind up.



   
ReplyQuote
Matthew Hyman
(@mbhyman)
Reputable Member
Joined: 16 years ago
Posts: 340
 

I think the On The Hill section would be more appropriate for this question, not the offshore fishing reports.



   
ReplyQuote
Bryan Williams
(@squid)
Estimable Member
Joined: 22 years ago
Posts: 160
 

Thanks all for the advice! Not hard to see it makes an impressive difference. That alone may make my mind up.

Note that the gray paint that I went with is NOT bottom paint. Like you, my boat is stored on the trailer so I do not need the antifouling qualities of bottom paint. Instead, mine is a 1 part epoxy....hard as a rock, slick and can be made to any color you want. I have been EXTREMELY pleased with how its held up. Adam is the only person offering this service so if that sounds like something you want, give him a call. If you're in the Wilmington area and would like to check mine out, just let me know.



   
ReplyQuote
clt_capt
(@clt_capt)
Estimable Member
Joined: 23 years ago
Posts: 124
 

I think Squid makes a great point - When the old bottom paint is removed, some gelcoat may be damaged. Sealing over with an epoxy paint or barrier coat is necessary to seal the bottom - to keep any fibers that might get exposed from absorbing water.

No need for anti-fouling bottom paint if you keep it on a trailer.



   
ReplyQuote
Share: