SWC Forums
Pull up a chair...let's talk fishing.
Arrived at CB inlet around 5am yesterday in the thick fog and about an hour after low tide. We haven't been out since January and things have changed quite a bit. Lots of breaking waves on our old trackline. It took us about 3 hours to make it to the Nipple due to the swell in the water. Luckily the fog cleared up after the first 20 miles. We didn't have an SST chart to work off of so our game plan was start our at the Nipple and head south. Water temps were 70-71 all day long. We didn't see any bait near the Nipple so we trolled south toward the Steeples working between 350-200' of water. He got our first bite around 10am and we ended up breaking off a nice hoo at the boat. The line broke at the swivel. First time I've seen this, the knot was still in tact but the line actually snapped where it was wrapped around the swivel. Throughout the day we kept getting short strikes, about 6 all together. Around 1:30 we had another hoo hit the teaser, eat a short rigger bait then kill the shotgun bait. We got this one on the deck about 15 minutes later, nice 45# fish. All together we had a great day on the water and enjoyed the 75 degree air temps. That 3.6' swell at 6 seconds makes for a long ride out, that's probably why we didn't see another recreational boat all day. Came back in through the river in case the fog was bad. Most of our short strikes and both strikes were on the shotgun rod, ballyhoo and small chugger head combination. Colors didn't seem to matter all day.
Nice hoo - we are looking at the GW 272. What are your thoughts? How fast were you able to cruise in those conditions yesterday? Thanks
In regards to the 272, I guess as long as you are not expecting the ride to be like a heavy diesel or longer CC then it's pretty decent. Our's is a 1995 model (twin 200 hpdi) so it has the euro type transom, basically meaning the keel stops before the transom. Yesterday with 3-5' waves at 6 seconds (4 seconds the last 20 mile run) the boat will beat you up a little. The issue is at 20 mph the bow rises a whole bunch even with full tabs due to the keel issue so it slams hard. The boat likes to run at 30mph (then the bow stays down and does the work) however then you get airborne a whole bunch so we don't do that. Needless to say I sat in the front and the other 3 crew sat on the aft seat and a bean bag in the back. We ran 18-20mph on the way out and 28-30 on the way in. It does fine in that sea if running side seas just not a head sea. The boat also is great for pelagic fishing. We run double spreader outriggers and teasers on both sides. It holds plenty of fuel for days like yesterday when we burn 135 gallons.
I think we are going to move up to a 31 Cape Horn, 31 Oceanmaster, or something in that range this fall. We've had the GW for 6 years now and it's treated us very well but we primarily fish in the winter and would like a larger vessel. Who knows what boat besides a 60' rides good in a 3-5' head sea. It's nice to be able to fish all year long and feel safe out there, especially in a boat that cost in the $30k range.
My limited experience with knots makes me believe the knot wasn't wet/moistened before you tightened, which will cause it to fray/crack as pressure is applied, but very hard to see. always moisten knots before you tighten.
Thanks for the report & awesome job on the Hoo!