SWC Forums

Pull up a chair...let's talk fishing.

Notifications
Clear all

Knots

47 Posts
29 Users
0 Reactions
1,435 Views
outdoors
(@)
Reputable Member
Joined: 18 years ago
Posts: 342
 

For braid to flouro, I do a lot of jigging and the PR knot never fails. Ever. You need someone to teach you though. The guys at tex's can show you how, or if you live near CB, PM me and I'll show you.



   
ReplyQuote
bluebyu
(@)
Reputable Member
Joined: 19 years ago
Posts: 183
 

For Braid to mono or mono to floro I use the albright knot I have never had an issue from inshore to kings to gulfstream. Improved clinch to my swivels. hope this helps

BLew By U! Fishing Team
23T Onslow Bay
300 Vrodz



   
ReplyQuote
Stephen Wicher
(@mppheel)
Noble Member
Joined: 15 years ago
Posts: 1008
Topic starter  

Great info guys, thanks



   
ReplyQuote
Matthew
(@)
Noble Member
Joined: 19 years ago
Posts: 1385
 

Been missing your reports, Matthew. Hook us up!

Maybe I will post an end of summer summary...

We have been offshore 3 times since this report but here's a sneak peak... 😉



   
ReplyQuote
dekeoy
(@)
Reputable Member
Joined: 22 years ago
Posts: 269
 

Once you've figured out what knot you will be using go to texstackle.com and click on the "fishingknots" in the yellow tab at the top of the page. Very detailed and simple vidoes.....just pick the knot you are inerested in.



   
ReplyQuote
Stephen Wicher
(@mppheel)
Noble Member
Joined: 15 years ago
Posts: 1008
Topic starter  

going to try palomar, uni-knot with 2 passes thru the hook/swivel etc. some of the other knots I am not familiar with and will prasctice those too like the spider hitch, pR etc



   
ReplyQuote
Will
 Will
(@porcha)
Prominent Member
Joined: 15 years ago
Posts: 657
 

I couldn't tie an FG knot last night to save my life...sticking with Uni - Uni



   
ReplyQuote
Bruce MacLachlan
(@bmac)
Eminent Member
Joined: 19 years ago
Posts: 29
 

Lots of good advice / opinions in this thread.

I second the short bimini with an offshore swivel knot for tying braid to swivel.

PR Knot for tying leader to braid is no doubt the strongest, but it's a difficult knot to master. A short bimini in the braid with a double uni is simple and hard to beat. I'll usually tie the PR knot prior to the trip. If I lose a leader to toothy critters, I tie the double uni on the boat.

For 40 lb mono and under, I've found the Trilene knot to be a super strong and reliable connection. For 40 - 80, I highly recommend the San Diego Jam Knot which is really a variation of the uni- knot. It's depicted on many on-line knot sites. It works pretty well even up to 100 lb mono if you use a cleat and a pair of gloves to pull it completely tight.

Above 80, I say double crimps. Except if I'm jigging with 100# leader. Then, I still use the SD Jam.



   
ReplyQuote
Larry Rowland
(@lwr37)
Famed Member
Joined: 16 years ago
Posts: 2552
 

Leader to braid=hollow core can't be beat. I also have some regular braid on some reels. I took 25' of hollow core and inserted the regular braid about 8' inside the HC. Then inserted my wind on, mono, into the HC. You don't have to have a reel full of HC you just need a "top shot" of it. You will need a set of needles and the correct supplies. The link below is to the HC splicing needle set. Its pricey but worth ever penny!

http://www.tackledirect.com/powerpro-pphlacekit-hollow-ace-splicing-kit.html



   
ReplyQuote
Capt.Barbosa
(@)
Prominent Member
Joined: 20 years ago
Posts: 784
 

Anyone for the Red Phillips knot????????????? Looks very easy to tie, but is it stronger than the uni to uni?



   
ReplyQuote
JR MELVIN
(@)
Noble Member
Joined: 20 years ago
Posts: 954
 

The pr knot is the best for mono to braid. you just need a fly tying thingy and you will be good.



   
ReplyQuote
Steve Hesltine
(@stevehes)
Prominent Member
Joined: 17 years ago
Posts: 646
 

I like the Red Philips knot for braid to leader fluro/mono.

Uni 2 uni ends up a larger knot if you have a heaver leader, and the uni braid can slip.

Strength wise is going to depend on who's tying it. I'm sure many folks on here can tie a uni better than my Red Philips. But it's an easy knot, I can tie it reasonably well and it goes through the guides easier than a double uni IMHO



   
ReplyQuote
Capt.Barbosa
(@)
Prominent Member
Joined: 20 years ago
Posts: 784
 

cool thnx for reply....never had a uni to uni fail. Kind of like how quick you can tie the red phillips. Im gonna do some testing....we will see.



   
ReplyQuote
Will
 Will
(@porcha)
Prominent Member
Joined: 15 years ago
Posts: 657
 

gonna test the red phillips + SD jam knots on my jigging setup this weekend...if a knot breaks, I'm blaming you all



   
ReplyQuote
Stephen Wicher
(@mppheel)
Noble Member
Joined: 15 years ago
Posts: 1008
Topic starter  

been practicing... i guess i have gotten lazy on my knot tying skills... this is a good refresher.

I will try surgeon knot instead of uni-to-uni for connecting a braid to leader of a larger diameter.

uni-to-uni for mono/fluoro of similar diameter

palomar for mono to swivel/hook'

either the "pass thru hook/swivel twice before tying the uni" knot OR palomar for braid to swivel/hook - hopefully eliminating slippage.

might even try to improved cinch knot too.

thanks.. i needed a refresher. we'll see how well these work this weekend before i move on he the more difficult knots. i need the simplest knot that will hold.



   
ReplyQuote
Page 3 / 4
Share: