SWC Forums
Pull up a chair...let's talk fishing.
your problem might be the rod! what are you using..
Star plasma 6'6" 15-30 spinning,
ugly stick tiger jigging rods spinning,
penn slammer 20-50 convetional
I also use penn battle 6000 and 7000 ?
I knowmy line breaks at hookup with a monster, but i also know that a few knots have given on medium size fish too.
Greta info, i will use the advice and practice for this weekend if it will be calm.
Need to check reefcast.
The albright with the nail knot termination is a beast.
Take a look at the episodes of "Knot wars" online. They test all of the popular knots against eachother, as well as viewer knots, which in some instances are much stronger.
Over 50#-Crimp
Anything 50# and under- mono/braid to swivel:
Check out the "fishin fool knot" tests at 100%. Its a viewer knot that beat out the uni/ palomar etc., and its simple. Basically just a uni knot except you go through the swivel/hook eye twice before starting the initial loop. This knot has solved all of my knot failure problems when fishing bigger fish, cobia,etc. Of course I snell my hooks, but when youre in a hurry to get back in action the "fishin fool" is a quick substitute.
Braid to mono/flouro:
The modified Albright wins out, and its very low profile. most dont realize, but braid cuts through the mono/flouro (with a load on it) using the typical uni/uni connection because the two lines are twisted together. Using the mod. Albright, just remember to always keep the braid on top of the mono, and moisten when tightening. The braid on top also makes it low profile.(passes through guides easy and you can clip tags very close keeping from snagging grass and mess. IMO glue is just an insurance policy, and not necessary with a knot with 100% breaking strength.
Just my opinion ... but you shouldn't need to glue to get your knots to hold.
BINGO!
You only need to know 3 knots...
Uni
Uni to Uni
Loop (MirroLure) knot, AND, be able to crimp with double sleeves to catch anything with fins.
My 2 cents worth....
Learn what you can and can not tie, and stick with it!
I use 80lb mono for my leaders and I tie what I believe they call the "super improved clinch knot". Once you pull it tight it isn't a problem with the bigger mono. I have tied this knot for years and it is my goto knot. _
I have used the same knot for braid to mono connections but if there is a large diameter difference the braid will cut the mono. The majority of time for my braid to mono I use the "PR knot". It takes some practice but it casts like a dream and no failures as of yet.
Crimpers are the same way. My pair will apply a different crimp preasure than_ yours. (Even if they are the same brand) Get use to your pair and stick with them.
Ditto on having to glue anything!
Matt
Just my opinion ... but you shouldn't need to glue to get your knots to hold.
Ditto
I read about the jansik special knot one time where you go through an eye three x and then back through the loops 3x. I tied a few bottom rigs with it and man did it look awesome when it cinched up.
Then when a couple rigs came back up with curly line where a swivel was supposed to be, I quit tying it.
Book said it tested at 100% but used a lot of line. I had much worse experience with it.
i've used double uni for 130# shock leaders but the line is more malleable than typical mono
i've also tied plenty of 80# double uni knots with no problem, just wet the line prior to cinching down..never glued before but I may start now...
my weak links were the terminal tackle, as others have mentioned. Hooks and swivels should be as high quality as your leader material...buy american if possible
Hooks and swivels should be as high quality as your leader material...buy american if possible
:tu: :tu: :tu: :tu: :tu:
Braid to mono = red Philips
Mono to mono/Fluro = Albright
Mono to terminal = uni
Braid to terminal = uni going twice thru the hook/swivel
I just kept practicing those 3 knots until I could tie them consistently. Albright can be a pain on a rocking boat at times
If your willing to take the time and effort to learn it, than learn the PR knot. In my opinion its the best knot out there for a braid to leader connection. It goes through the guides very smoothly and I haven't had one break this entire year and we have caught a ton of citation grouper this summer...The bobbin is well worth the money and don't let the knot puzzle you its not as hard as it looks...
For inshore (light tackle) I use a double uni knot or a Bimini twist to a "no name knot". This is only because with inshore (15-25 lb test braid) the knot is already small enough to go through the guides smoothly. But offshore all 3 of these knots should hold fine... if your looking for an easy quick braid to leader connection you can't go wrong with a double uni knot...
30 lb mono to swivel/hook?
Improved clinch knot or snell the hook
80 lb mono to swivel/hook?
I normally tie an improved clinch, Palomar knot if given the chance, or the "Jansik' knot. Never had any of these knots fail and all 3 have landed very large AJ's.. and I always figured AJ's are the perfect way to test your tackle ๐ I would say Improved clinch is my favorite knot because its so easy and works in any situation...you can tie on anything with an improved clinch knot and its a tough knot.
As for a crimper....we use them to make bottom rigs and things of that nature...Works very well but I have had a few people on the boat that tie their own bait and weight rigs and had much success with it. It's whatever you prefer. I also agree that you shouldn't need glue to make a knot hold. There are lots of strong knots out there that hold on their own. If I am inside tieng a knot and have time to burn I will "mushroom" the tag end of my knot though by burning it with a lighter. It makes the tag end swell up so its harder to slip. Hope this helps!
Tight lines and knots!
Matthew
Been missing your reports, Matthew. Hook us up!
Always tied a uni to uni for braid to mono leader for jigging/bottom fishing. Never had one fail, but heard the braid can cut through the mono if not tied correctly. Is the Red Phillips stronger than the uni to uni? If so im gonna start tying the red phillips instead of the uni to uni............
Nobody will probaly agree, but I've always tied the improved clinch knot with braid. Never no problems and never no glue and it's lightning fast to tie (which is a plus sheepsheading). Broke a 5600 reel mount with 50# braid and locked drag, landed the 3 60+ blackdrum on the same knot broke reel combo.