SWC Forums
Pull up a chair...let's talk fishing.
Sunday was just one of those days. If it could go wrong, it did.
Started out with a late start out of Topsail, heading for the area around the Devil’s A-Hole. The swells were big, but slow rolling so we were able to maintain about 28mph on the way out… a pretty good pace in a fairly small boat.
About 16 miles from my destination, I’m watching a Navy ship doing some odd maneuvers. Then I hear him on my radio. “Vessel at (lat/long coordinates), this is Warship 55. Alter your course and maintain a 10 mile distance. We are conducting live fire exercises.”
It was probably about the third time he called that I realized he was calling out MY coordinates. Well, crap. He and his target were between me and my goal! I turned it back inshore, and after a 15 mile detour, managed to loop back around to the south and get out toward the break.
Hit the fish right away, but it was bonita and barracudas. Some action is better than none, but I didn’t run two and a half hours for fish I could catch off the beach.
Then, something started chasing my short line. At first I thought it was another bonita, but I dropped it back anyway. Missed the strike, then decided to crank it in fast… bull dolphin liked that, and it was on. Not a monster, but I’m almost out of mahi in the freezer, so I was stoked. Brought him alongside, and handlining the squid line, waiting for the gaff… and the crimp slipped. Off he went. Much cussing ensued.
There was more cussing when something hit the planer line and broke it off at the swivel.
It got slow for a while, when suddenly the blackfin started blowing up on a weedline. There were a handful of boats out, and every one of them (including us) went racing for the action. We were about to make the turn to go back over the area when the planer line went off hard. The fish ran off a lot of line and put on a pretty good fight when I got it turned. Then the line went slack. Well, dammit. I kept cranking, and thought I felt a head shake. Was it a fish, or was I fighting the planer?
Planer got to the boat, and my hands were full so I couldn’t get my gloves. It didn’t feel like there was anything there anyway as I started to handline the leader. I was down to the last 10 feet of leader when I saw him… a nice wahoo. And, apparently, he saw me too and took off. Cut a pretty good slice in my fingers before I could drop the line, but it was too late. The planer hung up on the gunnel just long enough, and the 100 lb leader snapped like a shot.
I was pretty torn up after that. Worse, we needed to head for home.
I guess the fish gods took pity and offered up a fat little blackfin as a consolation prize for our trip back to the hill. At least we’d take home one (very expensive) edible fish for the day. Ran back with the seas, making about 30 mph, so at least we didn’t have to wallow our way back like the last trips.
Thanks for the report. Even the most experienced fisherman will have a day like that every once in awhile. Ok maybe not quite that bad. Haha JK. Well at least you made it out there and had those experiences. I remember having a huge fish pull a crimp lose before. After that I double check all my crimps and use the longer ones. Probably not required but it’s a lesson that I learned. No issues since. I went out as well yesterday. I had 3 guys on the boat that have never fished offshore at all. One of the guys felt as if I complained a lot and was nit picking about how I like to maintain my boat and gear. I looked over and saw that he had an aluminum rod butt standing up on one of the seats I asked him to take it off because I would rather not put holes in the vinyl. His response was, dude it’s a boat!! Seems like every time I take people out that don’t own a boat themself, there is some sort of discussion or dispute on what not to do. We did manage one wahoo , about 45lbs. Had one more on but since I was on Gaff Duty I had another guy drive. I told him to slow it down just “a tiny bit” next thing I know the boat is near idle speed and all the lines are loose Bye Wahoo. I won’t hold that against him but the other guy with the rod incident is different. No telling him many times he banged the metal rod butts on the deck as well.
Thanks, man.
I'd probably have a comeapart if I had someone aboard who acted like that. I've been real lucky with charter customers so far, I guess.
One of the things I realized yesterday was that I need one more set of hands on Gulf Stream trips.
As far as the crimps... I have a hard time trusting them. One of the ones that failed yesterday was from the factory. The other (the dolphin) was my work.
If you don’t have one already, get a bridle setup for your planer rod. It will make a night and day difference in the ease and safety of landing a fish.
If you don’t have one already, get a bridle setup for your planer rod. It will make a night and day difference in the ease and safety of landing a fish.
Thanks! I've been thinking about rigging one, but obviously hadn't "got around to it". After Sunday, I just need to step it up and do it. If nothing else, it ought to save my fingers!
I would have put the rod in the seat guy in time out.
We missed several bites. Went 1 for 4 in the first 15 mins. It's part of wahoo fishing. Some days you seem to get it all right and boat the majority while others leave you scratching your head. As for the planer incident, If you choose to do the handline deal you always need to be prepared to let the line go. The easiest way to bridle is to do an FG knot to attach your leader to the braid if you have solid and then do 2 drop loops in the braid itself. And it is one less connection that has a chance to fail.
We missed several bites. Went 1 for 4 in the first 15 mins. It's part of wahoo fishing. Some days you seem to get it all right and boat the majority while others leave you scratching your head. As for the planer incident, If you choose to do the handline deal you always need to be prepared to let the line go. The easiest way to bridle is to do an FG knot to attach your leader to the braid if you have solid and then do 2 drop loops in the braid itself. And it is one less connection that has a chance to fail.
Good points. Looking back, the whole incident was a bit of a cluster... I was pretty quick to let go the line, but I went from thinking "no fish" to thinking "oh sh**" when that sucker took off. They deserve the reputation for being speed demons! I think one of my big mistakes was dropping that planer in the boat instead of leaving it over the side while I brought the line in. The planer hit the rail on the way out, and that's all it took to snap the leader.
I was looking at that method you're describing with the braid loops. I like the idea of not having more connections, but I wasn't sure about the integrity of the braid once you put the loops in. Is this how you're doing it? Does it hold up?
We missed several bites. Went 1 for 4 in the first 15 mins. It's part of wahoo fishing. Some days you seem to get it all right and boat the majority while others leave you scratching your head. As for the planer incident, If you choose to do the handline deal you always need to be prepared to let the line go. The easiest way to bridle is to do an FG knot to attach your leader to the braid if you have solid and then do 2 drop loops in the braid itself. And it is one less connection that has a chance to fail.
Good points. Looking back, the whole incident was a bit of a cluster... I was pretty quick to let go the line, but I went from thinking "no fish" to thinking "oh sh**" when that sucker took off. They deserve the reputation for being speed demons! I think one of my big mistakes was dropping that planer in the boat instead of leaving it over the side while I brought the line in. The planer hit the rail on the way out, and that's all it took to snap the leader.
I was looking at that method you're describing with the braid loops. I like the idea of not having more connections, but I wasn't sure about the integrity of the braid once you put the loops in. Is this how you're doing it? Does it hold up?
I do it this way. I have a video or pic somewhere and will see if I can find it. It holds up just fine to the rigors of fishing. I typically fish it for the season and will cut it off and do a new one each year unless I get broken off. I have had times that a fish snatches it out my hands while I try to clip the planer on. Not much you can do there and if drag is too tight line pops. I have ran it with 100, 150 and 200# braid and no issues. but of course everyone has their own way to do it.
Thanks! I watched FishOnForte's video a bunch of times (he mentions you), and it does look like a better option than adding a bunch of crimps and swivels. I'll be adding that into my line before my next trip.
I really appreciate folks sharing info like this, by the way. I'm just getting back to this kind of fishing after a very long time away. There's a lot I've forgotten, and some of this stuff is brand new to me.
Thanks! I watched FishOnForte's video a bunch of times (he mentions you), and it does look like a better option than adding a bunch of crimps and swivels. I'll be adding that into my line before my next trip.
I really appreciate folks sharing info like this, by the way. I'm just getting back to this kind of fishing after a very long time away. There's a lot I've forgotten, and some of this stuff is brand new to me.
We use to handline when I first started. its fun but also easily dangerous. We would always bring the planer up close to the rod tip that way it can't swing much and has an easier path if it needed to go back in the ocean.