SWC Forums

Pull up a chair...let's talk fishing.

Notifications
Clear all

Planer size question for Planer Rod

42 Posts
22 Users
0 Reactions
1,569 Views
John
 John
(@)
Estimable Member
Joined: 16 years ago
Posts: 165
Topic starter   [#40820]

Guys I'm curious here...I've always just ran my planer off 400# Momoi cleated to the boat and then just attached via a rubberband. I have set up one of my 80s as a planet rod and Matt over at Joe Shutes made my bridle to attach the planer. I'm thinking of trying the planer rod setup next time I get out for wahoo (hopefully in the next couple of weeks), what size planer are you guys clipping on? I use an old salty no. 32 on the cleated setup but I think that would be a bit much...input?



   
Quote
Vic
 Vic
(@vic)
Estimable Member
Joined: 19 years ago
Posts: 169
 

Number 4 be good. You can probably go up to 8 with no issues.
I have couple number 4's which I use and thinking about getting a number 8 so I can run two planers at different depths.



   
ReplyQuote
Eddie
(@salte)
Eminent Member
Joined: 14 years ago
Posts: 32
 

DO NOT USE A SEA STRIKER PLANER. Use an old salty # 16 or # 12 if your trying to figure it out. Let it creep in a following sea. It will creep. Nothing you can do about it.



   
ReplyQuote
Eddie
(@salte)
Eminent Member
Joined: 14 years ago
Posts: 32
 

Skip the cleated planer....I bet your line never makes it to the bottom. The rod set up with 100 ft windon is the way to go. Make sure you have a backing plate on that holder.

Just my .02



   
ReplyQuote
Bryan Hunt
(@)
Prominent Member
Joined: 18 years ago
Posts: 628
 

O.S. #16 and #12 have worked very well for me.



   
ReplyQuote
Michael Biggerstaff
(@)
Estimable Member
Joined: 15 years ago
Posts: 71
 

I use a #12. Started off with #16 but backed to the 12. Make sure to make it black. I dip mine in black epoxy resin but a black permamarker will work. If it is not black, a wahoo will try to eat it!



   
ReplyQuote
todd skeen
(@chumbucket)
Noble Member
Joined: 16 years ago
Posts: 2117
 

old salty #16



   
ReplyQuote
John
 John
(@)
Estimable Member
Joined: 16 years ago
Posts: 165
Topic starter  

Guys I appreciate the feedback here. I put a backing plate on the holder first part of the summer. Last "need to know" question...when I want to "trip" the planer and check my bait...what's the easiest was to do so?



   
ReplyQuote
John
 John
(@)
Famed Member
Joined: 20 years ago
Posts: 3801
 

Ask 10 people and get seven opinions.
I'll tell you what works good for me: #6 and #8 Old Salty.
To trip, while moving put in freespool for 3-4 seconds, then slam the drag tight.
Good Luck



   
ReplyQuote
Dale A. Tycast
(@toad)
Prominent Member
Joined: 18 years ago
Posts: 722
 

We use a old salty 12, and don't give up on the cleated planer. I use they same setup a lot and have caught many wahoo off of it. It's the way to go if a planer rod and reel are not in the budget.



   
ReplyQuote
John
 John
(@)
Estimable Member
Joined: 16 years ago
Posts: 165
Topic starter  

Guys thanks for all the information. I'll never give up on the cleated planer setup. "Toad" just as you have said I've caught many wahoo off that cleated setup. I just want to try the planer rod setup that I have and see if it simplifies things. I know last weekend when my dad and I were out we fished a fairly decent weed line and we happened to run into scattered grass too and sometimes it can be a pain in the ass having to reel your bait in and then tugging up the cleated planer as well and clearing all the grass. I may be wrong but I think it would simplify this process as well as help us keep things simple in our setup. I usually pull 7 lines and with my dad getting up in age a bit I want to try and make things a little easier to handle.

Sounds to me like I need to pick up a #8 and a #12 planer and I should be all set.



   
ReplyQuote
Dale A. Tycast
(@toad)
Prominent Member
Joined: 18 years ago
Posts: 722
 

Only thing I'll say is the planer rod takes the fun out of fighting the fish. I like when that rubber band breaks and you have the fish on that 30 or 50 to fight. Good luck.



   
ReplyQuote
Chris Zoubek
(@)
Famed Member
Joined: 17 years ago
Posts: 2585
 

O.S. #16 and #12 have worked very well for me.

X2



   
ReplyQuote
Andy
 Andy
(@ebbtideandy)
Prominent Member
Joined: 18 years ago
Posts: 655
 

Agreed with Toad Would much prefer to have the fight on my TLD 25 than on a 80W. Plus, you can hold it with quite a bit less drag, so you don't have to jump on the rod and back off the drag like you do with a planer rod.



   
ReplyQuote
Matthew Hyman
(@mbhyman)
Reputable Member
Joined: 16 years ago
Posts: 340
 

Old salty #8 & #12.



   
ReplyQuote
Page 1 / 3
Share: