SWC Forums

Pull up a chair...let's talk fishing.

Notifications
Clear all

Planer size question for Planer Rod

42 Posts
22 Users
0 Reactions
1,570 Views
Clark Beeson
(@)
Reputable Member
Joined: 21 years ago
Posts: 200
 

Old Salty #8 stbd and #12 port.
Separate depth to minimize tangles.
Old Saltys will (usually) let you go freespool for 2-3 seconds and trip for easier retrieval.



   
ReplyQuote
Larry Rowland
(@lwr37)
Famed Member
Joined: 16 years ago
Posts: 2552
 

I might as well jump in too. I pull a #8 old salty. I did try a #12 a couple weeks ago and I did catch fish. The only thing I didn't like about it is I had to put so much drag on it a 35lb wahoo couldn't pull any drag out. I'll be moving back to a #8 because I like hearing that drag scream. Now my buddy uses mostly a #6 and is happy with it. We fished Thursday and caught 6 wahoo and they all came off the planer rod with a #6 old salty. I'll not leave the dock without my planer rod, period. Here's the video of Thursday.

https://www.youtube.com/v/smo4Elx4LrY



   
ReplyQuote
Dale A. Tycast
(@toad)
Prominent Member
Joined: 18 years ago
Posts: 722
 

I'm with Larry, we pull a 12 on the Carolina Girl but I would prefer a 8, but hey what does a mate know. I pull a 8 when I fish my cc cause then I'm the Capt. Ha ha.



   
ReplyQuote
William McCann
(@werewolf0711)
Famed Member
Joined: 15 years ago
Posts: 3133
 

Ask 10 people and get seven opinions.
I'll tell you what works good for me: #6 and #8 Old Salty.
To trip, while moving put in freespool for 3-4 seconds, then slam the drag tight.
Good Luck

Agree here. We run two penn 30s one with a 6 one with an 8. Tried a 12 as well and it holds it just fine but didn't like it. With our setup a wahoo will run out like a bat out of hell! Scream drag hard. That's the best bites I love to hear. Last trip we caught 3 on a #8 and 2 on a #6. There really are a lot of options and I like my light gear over those 80s any day.

Follow midnights tripping instructions. Work like a charm



   
ReplyQuote
brent aldridge
(@)
Reputable Member
Joined: 14 years ago
Posts: 200
 

Last trip we pulled a #6 planer on a 50W penn straight butt rod and set the drag to creep. When the wahoo hit it I backed of the drag a little and let him go. He pulled almost all of my 250 yards of braid. We fight the fish in the rod holder until we remove the planer off the bridal and finish in the stand up position. We did have another text book bite where he tripped the planer and came back for more. I was telling the guys on the boat to leave the rod alone and he came back. The wahoo will cut their prey in half and come back.



   
ReplyQuote
Larry Rowland
(@lwr37)
Famed Member
Joined: 16 years ago
Posts: 2552
 

Last trip we pulled a #6 planer on a 50W penn straight butt rod and set the drag to creep. When the wahoo hit it I backed of the drag a little and let him go. He pulled almost all of my 250 yards of braid. We fight the fish in the rod holder until we remove the planer off the bridal and finish in the stand up position. We did have another text book bite where he tripped the planer and came back for more. I was telling the guys on the boat to leave the rod alone and he came back. The wahoo will cut their prey in half and come back.

Nice point. Wahoo are considered slashing fish because of that reason. I cut the stomach open on all 6 of our wahoo Thursday and just about all of the contents were slashed. One even had half of a parrot looking fish in it. That's one reason I like my hook to be seated as far back in the ballyhoo as possible. If he slashes the back I'm good. If he slashes the front you'll hook'em in the side of the face, which is fairly common.



   
ReplyQuote
Bryan Hunt
(@)
Prominent Member
Joined: 18 years ago
Posts: 628
 

Fun= green 50# and over fish dogging it down while taking the planer off the bridle. Then getting the same fish wrapped on the leader while you stick em!



   
ReplyQuote
Larry Rowland
(@lwr37)
Famed Member
Joined: 16 years ago
Posts: 2552
 

Fun= green 50# and over fish dogging it down while taking the planer off the bridle. The getting g same fish on the leader while you stick em!

That's what I live for...



   
ReplyQuote
Justin
(@)
Reputable Member
Joined: 15 years ago
Posts: 241
 

i am with the last few guys. we lost a nice fish a couple weeks ago because our we had on a #12 which was a little to big for our setup. had too much drag applied through drag knob and couldn't back off enough to let the fish do his thing. my guess w/ an 80w you could run a 12 with no problem.



   
ReplyQuote
Doug Blizzard
(@)
New Member
Joined: 16 years ago
Posts: 1
 

I agree using the #6 and #8 planers. My question is what are you guys using for bait. My favorite is a blue/Black sea witch with a medium size ballyhoo. What's your favorite?



   
ReplyQuote
eric
 eric
(@)
Noble Member
Joined: 15 years ago
Posts: 1118
 

I change up what planer I run based on where I am seeing the bait in the water column. The majority of pelagics feed from below so I try to keep what I'm pullling at the same level as the bait.

Horse ballyhoo behind an ilander



   
ReplyQuote
Larry Rowland
(@lwr37)
Famed Member
Joined: 16 years ago
Posts: 2552
 

To be honesty you can put just about any lure on there. I've been running black/red mylar witch with a medium ballyhoo. The other day we ran a black/purple jag with a large ballyhoo. My buddy pulls a cedar plug and loves it.



   
ReplyQuote
John
 John
(@)
Estimable Member
Joined: 16 years ago
Posts: 165
Topic starter  

Ok guys...I'm acting like I've never offshore fished in my life...but this planer rod is new to me...I've got everything ready...got my planers...and sprayed them black this evening...but do y'all think the way I've connected my clasps to the planer is sufficient?image_430.jpg



   
ReplyQuote
Chris Zoubek
(@)
Famed Member
Joined: 17 years ago
Posts: 2585
 

I'm sure that us more than sufficient. I just have mine crimped on with a loop of mono.



   
ReplyQuote
William McCann
(@werewolf0711)
Famed Member
Joined: 15 years ago
Posts: 3133
 

Ok guys...I'm acting like I've never offshore fished in my life...but this planer rod is new to me...I've got everything ready...got my planers...and sprayed them black this evening...but do y'all think the way I've connected my clasps to the planer is sufficient?

I used mono crimped the hold my clasps. I think you'll run into a lot of corrosion having two different metals rubbing together. Might be ok though, it's worth a try



   
ReplyQuote
Page 2 / 3
Share: