SWC Forums
Pull up a chair...let's talk fishing.
When my sounder crapped out, I decided to add side-scan to the new unit since I'm wanting to learn bottom fishing. Only problem is that I can't make heads or tails out of what I'm seeing.
Tried it out a couple of weeks ago, passing over known wrecks etc., but couldn't see what I thought I was supposed to see.
Manuals that came with the unit (Lowrance) were pretty thin with info and searching for tutorials didn't produce much. Anybody have anywhere you can point me?
Have not found side scan or down scan to be of particular value. Not on Hummingbird or Lowrance.
You can find video's on YouTube that will help you set it up and give you help on what you are seeing. You need to get it setup right and then understand what you are looking at it takes a little time but I have gotten good use out of my side scan.
Pretty neat for looking for structure in lakes when crappie fishing and have watched VA Beach ocean striper charters reallly use them to lock on the fish.
Don't know how well side vu or scan will work in the deep. I've got a Garmin 741xs with chirp for the bottom and really like it. Can watch the rigs going down and fish actually follow the rigs down. Is your unit chirp compatible? If the bottom "lights up" on mine, I know I'm in the right place. Ain't worried too much about the view. If you get acustomed to your unit you will know when you are in the right place.
Don't know how well side vu or scan will work in the deep. I've got a Garmin 741xs with chirp for the bottom and really like it. Can watch the rigs going down and fish actually follow the rigs down. Is your unit chirp compatible? If the bottom "lights up" on mine, I know I'm in the right place. Ain't worried too much about the view. If you get acustomed to your unit you will know when you are in the right place.
the side scan is useful up to around 100-150 feet. Beyond that it doesn't pick up bottom well but can be used to find bait schools and suspended game fish.
I have a new Evo2 Simrad system with LSS2 down/side scan on one display and B175HW chirp transducer on the other. The chirp is excellent and I can see far more with it than I can with the down scan, even in relatively shallow water(40-90 ft). Things that are faint on the chirp don't show up at all on the downscan and large, strong returns on the chirp show up as just faint dots on the downscan if at all. I keep looking for a way to turn up the gain on the downscan but there isn't one as best I can tell.
I use mine on split screen to compare what I see on my other transducer but don't use it nearly as much as I thought I would. I actually use it the least of any of my electronics.
I use it at near-shore artificial reefs and it works great. I have a Garmin 840xs. I use it to find the structure and anchor up just down current from it. You can really target flounder this way that are waiting on bait to come over the structure.
My biggest part of learning for me came when I figured out just how slow you must go. Cruise by an ICW marker post or better yet, a tripod marker and look for the image on the screen. Idle speed is plenty fast is shallow water! It has helped me find plenty of structure to fish at the Artificial Reefs.
Faster than 1 or 2kts you will not see much on side-scan. Even Military ships like the USNV Grapple and USNV Grasp maneuver at around 3kts when using side-scan in recovery missions.
For bottom fishing, try anchoring over a wreck and putting the motor in reverse. Then turn hard to port and then to starboard allowing the motor to pull you over or away from structure. This will help you to see how the side-scan works and to understand what you are seeing.
Thanks for the feedback folks,
The main thing is that I have a ton of bottom numbers given to me with little description available other than the TDs and maybe "ledge" or "good bottom", so trying to fine tune the location would be nice if I could ID something on the screen. Also, many of these #s are in 40-60f of water.
Thanks for the feedback folks,
The main thing is that I have a ton of bottom numbers given to me with little description available other than the TDs and maybe "ledge" or "good bottom", so trying to fine tune the location would be nice if I could ID something on the screen. Also, many of these #s are in 40-60f of water.
Just send me the numbers and I'll check em out for you ':wink:
Just send me the numbers and I'll check em out for you
:bum: