SWC Forums
Pull up a chair...let's talk fishing.
On the Zukes there is a plate where their freeze plug on the block goes through they are different metals and have been known to corode away causing a big loss of power esp on the 115 hp 140 hp model is what I have been told ,, I saw 1 of them last week on a 2001 115 with an estimated price tag of $4,000 to fix
I was also told it is a pretty common occurrence
I have a 2003 Johnson 140 which is a suzuki that I purchased new in 2004, on a 195FS Sea Pro. It has been a great motor.
I've got a 2003 90 Johnson also....runs like a champ and never misses a beat. Everyone that gets on is amazed by how quiet it is. I'll never go back to a 2 stroke, and as far as name brand is concerned, I have 0 complaints with my Johnson/Suzuki
We have had a suzuki on our 20' SeaQuest and it has never given one problem. We run it pretty much every weekend of the spring, summer and fall if the fish are biting, the bikini's are out, or we just want to ride. Great on fuel, would suggest to my best of friends.
I had a 2005 22 McKee Craft with a 250 Suzuki for about 100hrs of use. It ran great and I ran it pritty tough but it never skipped a beat. Only had it for 3 months then decided get a bigger boat.
But I must say Saltwater Marine has a great service dept. I have never had an issue with them and they do Yamaha and Suzuki.
Tight Lines
Jess Grace
1 more vote for Suzuki and Joel at Salt Water Marine.
I have owned 2 140s. Quieter, more torque, and use less fuel than my current Yamaha 150. (Not that I am not happy with the Yamaha. It's still pretty quiet, strong enough, and pretty good on gas ๐ ) Longest I had any of the 3 was 3 years but nothing except scheduled service.
On the Zukes there is a plate where their freeze plug on the block goes through they are different metals and have been known to corode away causing a big loss of power esp on the 115 hp 140 hp model is what I have been told ,, I saw 1 of them last week on a 2001 115 with an estimated price tag of $4,000 to fix
I was also told it is a pretty common occurrence
This is called the engine holder and it is a known issue among Suzuki and Yamaha. All the dealers are tight lipped on this issue but I have heard it from the horse's mouth. Make sure the motor you are buying does not fall in the range of motors that have or will have the problem. I believe they fixed the corrosion issue starting with the 2008 models but this is a very real problem. Flushing your motor does not help or hurt this issue because it is the combonation of hot emission gasses and salt at the same time that are causing this. (think manifolds on i/o motors) This only applies to 4 strokes.
On the Zukes there is a plate where their freeze plug on the block goes through they are different metals and have been known to corode away causing a big loss of power esp on the 115 hp 140 hp model is what I have been told ,, I saw 1 of them last week on a 2001 115 with an estimated price tag of $4,000 to fix
I was also told it is a pretty common occurrence
This is called the engine holder and it is a known issue among Suzuki and Yamaha. All the dealers are tight lipped on this issue but I have heard it from the horse's mouth. Make sure the motor you are buying does not fall in the range of motors that have or will have the problem. I believe they fixed the corrosion issue starting with the 2008 models but this is a very real problem. Flushing your motor does not help or hurt this issue because it is the combonation of hot emission gasses and salt at the same time that are causing this. (think manifolds on i/o motors) This only applies to 4 strokes.
No manufacturer is immune I have had some real issues with Yamahas....they were taken care of quickly and to my satisfaction but down time just the same. That said I like both Yamaha and Suzuki. I had 2 225 Suzukis for 5 years with 0 problems and have a 140 with about 300 hours on it now with 0 problems. The offshore boat has Yamahas.
Would not trade my Suzuki for anything.
Good Post Gary !
๐ I,ve got a 2004 suzuki 140 hp on a 21 ft boat with over 4000 hrs on it ,,,kept it serviced and change oil,,,new spark plugs every year and would have no problem going ouut 20 t0 50 miles tomorrow,weather permitting and my next one will be a suzuki on what ever boat I get (cape Horn) I hope
๐ I,ve got a 2004 suzuki 140 hp on a 21 ft boat with over 4000 hrs on it ,,,kept it serviced and change oil,,,new spark plugs every year and would have no problem going ouut 20 t0 50 miles tomorrow,weather permitting and my next one will be a suzuki on what ever boat I get (cape Horn) I hope
4000 hours in 6 years. ๐ฎ My goodness. I was rather proud of the 800 hours I put on my DF115 since 2005. It has been a great motor and has performed flawlessly.
Let me add another kudo to Joel and Saltwater Marine. I drive down there from Jacksonville every 100 hours on the engine. I'm sure I drive past a lot of great service centers on the way, but their service quality and customer support has been nothing less than outstanding.
2000 plus hours on my 2005 225hp. If it quit tomorro I would buy another one.