SWC Forums

Pull up a chair...let's talk fishing.

2005 Johnson 25 HP ...
 
Notifications
Clear all

2005 Johnson 25 HP Carb Question two stroke

4 Posts
3 Users
0 Reactions
19.2 K Views
Robert Gilliam
(@coastwx)
Honorable Member
Joined: 22 years ago
Posts: 430
Topic starter   [#54132]

Not sure if any have experience with a smaller Johnson around this year. I recently got a Carolina Skiff J16 with this. A bit undersize, but enough for what I do.

Anyhow, the motor runs good an all, but confused that the carb intake has no cover on it.

Here is a schematic that shows the same:

It's down at the beach so cannot post a pic right now, but found this:

I clearly see threads for a bolt on cover, but cannot find that cover on the schematics.

Any thoughts on this. Just unnerves me a bit that there is no cover. Seems like there should be one and it may help performance with a little more resistance to air flow.

Thanks.



   
Quote
Shaun
(@)
Active Member
Joined: 8 years ago
Posts: 17
 

Have worked on several of these engines and some years had covers and some had a wire screen over the throat of the carb to keep out debris which is the only reason for a cover at all . Many have nothing at all. You can check boats.net with the model # for your engine and see if it is supposed to have a cover but it isnt going to affect performance in any way. As long as you keep the engine pan clean where nothing can fly up in there you are fine!



   
ReplyQuote
Chip Garman
(@bluepirate)
Estimable Member
Joined: 15 years ago
Posts: 84
 

There is no cover on mine either. Like Finn says, keep the pan area clean and run the snot out of it. They love to run.



   
ReplyQuote
Robert Gilliam
(@coastwx)
Honorable Member
Joined: 22 years ago
Posts: 430
Topic starter  

Thank you very much guys.



   
ReplyQuote
Share: