SWC Forums

Pull up a chair...let's talk fishing.

Impeller replacemen...
 
Notifications
Clear all

Impeller replacement question

11 Posts
11 Users
0 Reactions
40.4 K Views
Nathan
(@ntbrinkl)
Reputable Member
Joined: 13 years ago
Posts: 216
Topic starter   [#48081]

When yall replace the impeller, do you buy a kit and replace everything or do you just replace the actual impeller itself? Meaning do you keep the older seals and gaskets? Can you get away with replacing with a kit every 1 out of 3 or 1 out of 2 times the work is done? Or should everything be replaced every time you do work on it?



   
Quote
BRIAN
(@bharbaugh)
Prominent Member
Joined: 19 years ago
Posts: 687
 

I never want to be 50 miles out and say " I should have bought a kit".



   
ReplyQuote
David White
(@)
Active Member
Joined: 11 years ago
Posts: 5
 

Kit here also....



   
ReplyQuote
Bob Schriber
(@)
Trusted Member
Joined: 16 years ago
Posts: 61
 

Do it right.Get the kit and make sure your seal as required and put a dab of grease on the bolts.



   
ReplyQuote
Frank Smith
(@wildcard)
Noble Member
Joined: 17 years ago
Posts: 1573
 

Do it right once and forget about it. Do you fish with dull hooks? Honest question.



   
ReplyQuote
Dale A. Tycast
(@toad)
Prominent Member
Joined: 18 years ago
Posts: 722
 

Why would you go thru the trouble of changing the impeller and not the seals? Do it while your in there. Buy a kit.



   
ReplyQuote
David Drye
(@david20675)
Honorable Member
Joined: 12 years ago
Posts: 513
 

Yep



   
ReplyQuote
zigzag
(@)
Noble Member
Joined: 22 years ago
Posts: 1863
 

kit, and change the thermostats at the same time



   
ReplyQuote
roy rauert
(@)
Estimable Member
Joined: 14 years ago
Posts: 143
 

Don't be foolish, get the kit.



   
ReplyQuote
Kenneth
(@matador)
Famed Member
Joined: 17 years ago
Posts: 3641
 

The whole kit. Seals, impeller, and cover insert. A new cover too bc there can be fine burs from previous use that kill the life of the new impeller. Even if it looks and feels okay still replace it too.



   
ReplyQuote
Tony Glover
(@)
New Member
Joined: 11 years ago
Posts: 1
 

Just finished this job on a 225 yammie. definitely get the kit.



   
ReplyQuote
Share: