SWC Forums

Pull up a chair...let's talk fishing.

Standard Horizon 17...
 
Notifications
Clear all

Standard Horizon 1700 radio

7 Posts
4 Users
0 Reactions
22.3 K Views
Bob Mason
(@atbob)
Estimable Member
Joined: 15 years ago
Posts: 156
Topic starter   [#50660]

I swapped out my icom 304 for a SH 1700. Now that I have a big hole in the dash, the audio from the SH is so bad I cannot understand most transmissions.

West MArine has a new radio for me, which I will install this week. I don't hold out a lot of hope that there will be an improvement.

I have 2 questions:
Do others have issues with the audio from Standard Horizion radios?
Is optional external speaker a potential solution?



   
Quote
Brett Folsom
(@)
Honorable Member
Joined: 18 years ago
Posts: 548
 

I have a Standard Horizon GX 1600 and have ad no issues with it. The handhelds are not bad either. You may have a bad connection somewhere. Did you solder the cable connection or use the kit?



   
ReplyQuote
Bob Mason
(@atbob)
Estimable Member
Joined: 15 years ago
Posts: 156
Topic starter  

Interresting thought. Same connection as with the icom, but I think I remember it being the kit. Soldering that connection is my next step.



   
ReplyQuote
Brett Folsom
(@)
Honorable Member
Joined: 18 years ago
Posts: 548
 

I'm not saying one way is better than the other, I have not soldered mine. I had to watch this again after running my cable through my rocket launcher arch.

https://youtu.be/8ecfu7s8rPw



   
ReplyQuote
Guy Martin
(@)
Estimable Member
Joined: 18 years ago
Posts: 73
 

Have had the 1700 on 2 boats and it worked great. Used the PL-259 connector on both with good results.



   
ReplyQuote
Capt Ryan Jordan
(@pin)
Honorable Member
Joined: 21 years ago
Posts: 466
 

I have had a standard horizon on my boat for over 10 years, 2 different models, and they have always been great. Check connections and check the speaker or maybe you got a bad one, but I have one connected to a tall boy that on a clear calm day can hear boats for 50+nm clearly.



   
ReplyQuote
Bob Mason
(@atbob)
Estimable Member
Joined: 15 years ago
Posts: 156
Topic starter  

I checked the PL259 connector (kit type) and found the adapter to be finger tight. That won't work at these frequencies. No sign of corrosion, so tightened the adapter (it makes the connection to the coax braid) with tools.

Got a radio test on Ch 27 which I have never been able to get from home. Listened to the WX channel and the audio was completely understandable. Now, if the ocean would lay down, I will give it a test out there.



   
ReplyQuote
Share: