SWC Forums

Pull up a chair...let's talk fishing.

1999 VP 5.0gi (carb...
 
Notifications
Clear all

1999 VP 5.0gi (carbed) bogging

7 Posts
5 Users
0 Reactions
26.4 K Views
Barry Turano
(@barryturano)
Famed Member
Joined: 17 years ago
Posts: 2720
Topic starter   [#48005]

Still having issues I am now running 2 separators fuel is clean carb screen is clean. Was having a starvation problem at WOT. Changed out the fuel line (made it a little longer) think that has corrected the starvation at WOT. Started the boat up on Friday black smoke (first time in a long time that happened) burned off fairly quickly. Motor seemed to run well no bogging. Fished a tournament on Saturday motor seemed fine. Went to the weigh in leaving motor started right up but could not get past 3500 rpm's with out bogging down. Noticed my fuel consumption went from 13gph to 17gph at same rpm. Today I called the shop that rebuilt the new carb (Chinese parts were replaced) he thinks it maybe the fuel pump check valves sticking sometimes to much pressure because when it bogs I smell raw gas, or not enough pressure causing starvation and not allowing full rpm. It is very hard to diagnose because it is such an intermittent problem. I need some advice before I go back to my submarine training and calibrate it with a "crescent hammer", never use force on any inanimate object... just use a bigger hammer.
The fuel pump was changed when I first got the boat and I was fighting a "bad fuel" problem. The fuel was in the tank for about 3 years. I had it pumped and have run about 800 gallons of fuel over the last year and a half. I know all the bad stuff is gone now. Do yall think I'm on the right track?



   
Quote
(@)
Honorable Member
Joined: 18 years ago
Posts: 471
 

Starved for air?



   
ReplyQuote
John
 John
(@)
Famed Member
Joined: 20 years ago
Posts: 3801
 

No!!!!!
Your tanks are making trash.

Burn out the fuel and stick a led camera in there.

Not what you want to here, but my opinion.

Good Luck



   
ReplyQuote
Jason
(@)
Estimable Member
Joined: 13 years ago
Posts: 104
 

Black smoke is a sign of too much fuel, not starving. Pull the plugs.. Are they black? Sounds like a float could be stuck letting fuel overflow into the motor. Could foul the plugs which in turn wouldn't allow the motor to rev. Just an opinion, dunno if it helps.



   
ReplyQuote
Barry Turano
(@barryturano)
Famed Member
Joined: 17 years ago
Posts: 2720
Topic starter  

No!!!!!
Your tanks are making trash.

Burn out the fuel and stick a led camera in there.

Not what you want to here, but my opinion.

Good Luck[/quot

I am running 2 fuel water separators. Drained them out fuel was clean no dirt or anything in the fuel. Even took the fuel line off the carb and pulled the screen. Nothing there either. Maybe something in the float valve?



   
ReplyQuote
Barry Turano
(@barryturano)
Famed Member
Joined: 17 years ago
Posts: 2720
Topic starter  

duplicate post



   
ReplyQuote
whitelightning
(@whitelightning)
Estimable Member
Joined: 20 years ago
Posts: 207
 

Hey Barry check your vent. It might be clogged. This will cause one to have problems as well. Hope it helps. I remember the problems that you had with fuel injection.



   
ReplyQuote
Share: