SWC Forums
Pull up a chair...let's talk fishing.
When I run hard for a good period of time and come to an idle my stb engine squeaks. If it is turned off for a bit it goes away. I have researched it and I believe it is a non issue with the rubber driveshaft bushing.
But before I did my research I pulled both cowlings and timing covers for an inspection. They looked identical , no obvious differences in appearance, timing belt tension, etc.. Except for one thing....
I noticed that the Cam Pulleys/gears on the non noisy engine have what we would call in the aerospace industry "witness marks on the bolts", It is a little white line to demonstrate something was performed at the factory or a means of knowing something was done after the fact. in this case I don't know.
But, my noisy engine did not have these marks on the pulleys. I checked the bolts for looseness only because I did not want to disturb them and they seemed fine.
The motors have 150 hours on them and I bought them new.
Any Yamaha guys want to comment on this?
It is most likely just the famous squel of the Yamaha. Rinse with freshwater, let dry, then spray with silicon spray, NOT WD40.
Here is a link discussing it that has some good links in some of the post.
http://www.thehulltruth.com/boating-forum/51684-yamaha-f225-squeals-anybody-have-prob-2.html
rubber driveshaft bushing needs greasing
2016 Yamaha??-- Let the shop handle it!!!!
yep my 2010 f200 drive shaft bushing sqeals after long runs and I have some Yamaha spray lube that stops it but not for long. Im with gshivar a warranty issue I thought they had fixed the problem.
it wont be doing it when I drop it off. That's the problem.
My 2013 F200 does the same thing every now and then plus a few other quirky noises. I have learned to not pay them any mind. The factory Yamaha rep at the boat show Sunday even seemed to agree that this engine can make a lot of different sounds. The strange thing is they only happen every now and then. My buddies twin F150's were a whole lot quieter than my F200.
it wont be doing it when I drop it off. That's the problem.
video it
it wont be doing it when I drop it off. That's the problem.
video it
Good Idea.