SWC Forums

Pull up a chair...let's talk fishing.

Anchor Help Needed
 
Notifications
Clear all

Anchor Help Needed

10 Posts
6 Users
0 Reactions
33.3 K Views
Danny McKeel
(@)
Eminent Member
Joined: 11 years ago
Posts: 30
Topic starter   [#49828]

Could someone please give me some information on what type and how big of an anchor I need. I have a 23 ft. Wellcraft cuddy cabin and the anchor I have came with the boat when I purchased it a few years ago. I just can not get the anchor I have to hold. I've added additional chain as recommended but still will not dig in. The bow of my boat sits higher as most cuddy cabins do. I have plenty of anchor rope with the depths I trying to anchor in. Way too much work to go to the front of the boat drop anchor and have no results. I don't anchor that much but there are times you need to. My present anchor is not that small I would guess between a size 7 to 10 slip ring style.



   
Quote
Barry Turano
(@barryturano)
Famed Member
Joined: 17 years ago
Posts: 2720
 

Your problem is the slip ring. You need about a 12# danforth with about 15' of chain. A slip ring anchor is for a very light boat like a jon boat. Not a 23' Cuddy.



   
ReplyQuote
Danny McKeel
(@)
Eminent Member
Joined: 11 years ago
Posts: 30
Topic starter  

Perfect. Thanks for the info.



   
ReplyQuote
Amanda
(@blueoceaneyez)
Famed Member
Joined: 21 years ago
Posts: 3235
 

Slip ring anchor rarely held even on my 17 skiff - hated it!
Get a 12-13# Danforth and appropriate chain.



   
ReplyQuote
Danny McKeel
(@)
Eminent Member
Joined: 11 years ago
Posts: 30
Topic starter  

Should I stick with the fluke style or maybe think about the claw or plow type?



   
ReplyQuote
Clark Beeson
(@)
Reputable Member
Joined: 21 years ago
Posts: 200
 

Scope matters as well. You should let out 3-4 times the water depth - in good conditions... more in a sea or current.
You also may want to back down gently on the anchor to assure it is set....



   
ReplyQuote
Barry Turano
(@barryturano)
Famed Member
Joined: 17 years ago
Posts: 2720
 

Stick with the fluke style. Not necessary to buy a fortress anchor. The ones at west marine will be fine for your needs. Chain is very important.



   
ReplyQuote
JOHNNY CARPENTER
(@)
Noble Member
Joined: 14 years ago
Posts: 1169
 

Never had any problems getting a slip ring anchor to hold my old 26 seacat Sl5c and it is a heavy boat. Plenty of heavy chain and letting it out slowly is the key. Have anchored in 140ft of water with no problems. Use the tie wrap break away trick to unstick it if it gets hung and you are good to go.



   
ReplyQuote
John
 John
(@piratejuan)
Reputable Member
Joined: 17 years ago
Posts: 299
 

x2 on this. I use a #9 Danforth with 12' of chain on my 21' cuddy. #12 should be plenty for yours.



   
ReplyQuote
Danny McKeel
(@)
Eminent Member
Joined: 11 years ago
Posts: 30
Topic starter  

Thanks everyone this has been a big help for me. Looks like an anchor for Christmas will be on the list this year. :hmph:



   
ReplyQuote
Share: