SWC Forums

Pull up a chair...let's talk fishing.

anchoring questions...
 
Notifications
Clear all

anchoring questions -- bottom fishing

39 Posts
24 Users
0 Reactions
143.7 K Views
Nick Evetts
(@)
Trusted Member
Joined: 14 years ago
Posts: 48
Topic starter   [#48322]

I'm coming to the conclusion that I really need to start anchoring for efficient bottom fishing, and need to dial-in my technique.

I have an anchor ball (sure helps!) about 300' of 1/2 line one of those ridiculously expensive, very light aluminum fortress anchors, and about 10' of chain.

My biggest concern is the anchor -- when I drop I see it fluttering all over the place. I'm wondering if it needs to be heavier to get to the bottom faster, or if I should just add more chain? (or put a spare 6' piece of galvanized chain I have inline with the 10' length of stainless chain).

I probably also need more rode, period, but the 300' seems to be sufficient and I'm realistically fishing in nice conditions and in about 100' of water.

The second problem or question I have -- in terms of anchoring right on the mark, it seem I'll see my piece of live bottom on the finder, sit on it, see which way I'm drifting (track on my plotter), then reverse that track by some distance, drop anchor and end up....somewhere else. 🙂

I guess this just takes some practice? It seems like dropping the anchor makes the winds and current change. <sigh>

Finally in terms of moving once anchored, w/out hauling in everything, I see this article on the site: http://saltwatercentral.com/modules.php?name=Content&pa=showpage&pid=6 how to: reanchor ...I'm not sure I understand the point of the carabiner and short length of rope. Why not just cleat the line off the port stern clean? Is it a safety thing? many thanks!



   
Quote
Kenneth
(@matador)
Famed Member
Joined: 17 years ago
Posts: 3641
 

My biggest concern is the anchor -- when I drop I see it fluttering all over the place. I'm wondering if it needs to be heavier to get to the bottom faster, or if I should just add more chain? (or put a spare 6' piece of galvanized chain I have inline with the 10' length of stainless chain).

I probably also need more rode, period, but the 300' seems to be sufficient and I'm realistically fishing in nice conditions and in about 100' of water.

The second problem or question I have -- in terms of anchoring right on the mark, it seem I'll see my piece of live bottom on the finder, sit on it, see which way I'm drifting (track on my plotter), then reverse that track by some distance, drop anchor and end up....somewhere else. 🙂

I think you are dead on about your first concern. I use a heavy anchor. I need it to get there and get there fast bc drifting another 10,20,30,40, or 50 feet waiting for it to set makes things problematic. I think you have enough chain as long as it is big chain but another 6 feet isn't going to hurt. I would try resizing anchor first.

You have enough rope. I fish in the same depth, have 300 ft. of rope, but because my chain and anchor are over kill, I sit on my spots and really never let more than 200 ft. out.

Try changing you plotter settings to north up. That should make things easier for your mind to process and put you on your spot.

Yes, it takes practice. I never really understood anchoring and flying anchors until I spent a day with someone that knew what they were doing. Made my life easier. I highly recommend spending time with someone on a boat that knows what they are doing, let them talk you through the process, and participate. If you are going to bottom fish a lot, learn to fly.



   
ReplyQuote
BRIAN
(@bharbaugh)
Prominent Member
Joined: 19 years ago
Posts: 687
 

Please do not Ever cleat off the stern to pull an anchor. Unless your boat is 40 feet long. If the anchor is really stuck you risk pulling that rear port corner under.

This is what happened to those football players a few years back in the gulf. They cleated a stuck anchor to the rear of the boat, it was sloppy out , and in a matter of seconds the boat flipped and 24 hours later when they found the boat there was only 1 guy left.



   
ReplyQuote
Drew Maultsby
(@)
Prominent Member
Joined: 17 years ago
Posts: 806
 

And the reason is, that with 2 or 3 hundred feet of nylon rode out, pulling with your boats power stretches it like a bungee. If the anchor doesn't break free, and you let off the power, it sling shots the stern down and under. I hope Dave will explain the caribiner, but maybe it is to release the rode, so that you can turn before you let off power.



   
ReplyQuote
Nick Evetts
(@)
Trusted Member
Joined: 14 years ago
Posts: 48
Topic starter  

thx Matador! I think I have an old galvanized steel anchor somewhere that's a lot heavier. I'll see if I can find it...

Good tip on 'North Up'

4 years ago, or so, fished with some friends on the Procrastinator. I remember Capt. John tweaking his anchoring by in a way I'd never seen, and am really annoyed at myself for not paying attention.



   
ReplyQuote
Jonathan Barefoot
(@jbarefoot)
Honorable Member
Joined: 15 years ago
Posts: 359
 

Not sure if the heavier is better idea applies. I went out and bought a 33 lb claw anchor with 25 ft of chain and 600 ft of 1/2" line. The anchor worked perfect and put me exactly where I want to be but keep in mind this setup is extremely heavy...long story short, I went to retrieve my anchor with the ball and ended up bending my bow roller and snapping the line at the cleat. Could have been any number of things but I suspect the anchor line was defective and also it was way more anchor than I needed, but it could have been genuinely stuck too. Never had an issue pulling a danforth style anchor. We will see shortly if a diver I spoke with can find it for me.



   
ReplyQuote
Kenneth
(@matador)
Famed Member
Joined: 17 years ago
Posts: 3641
 

Btw. I use a 25 lb anchor for a 22 ft bay boat. Overkill. But it works. I would try to fish with John again and let him school you. For sure. The professional fisherman know the deal and most teach well



   
ReplyQuote
Larry Rowland
(@lwr37)
Famed Member
Joined: 16 years ago
Posts: 2552
 

I never understood why people bought a light anchor and then added heavy chain to get it to stick. I bought a used Fortress anchor from a guy here on this site. After I got it I realized what I was doing. Now it hangs on my fence as a reminder of not buying shit I don't need.

Back to anchoring now. I have the same issues you described. Here is what I found. Just because you drift one way without the anchor out doesn't mean you are going to drift the same way with the hook out. You, or I, can't know the real anchor coarse by simple drifting an area. Your completely right about the wind/current causing the boat to act differently when connected to the earth via the anchor. It is a great place to start though. I anchor the first time to see what my course is. Then I use that info and try to hit my spot. Sometimes I hit it sometimes I miss it. Anchoring is a thorn in my side! Just when I think I have if figured out I completely fuck it up! I think it just takes a lot of practice and use. If I fish 5 times in 10 days I get better at anchoring and reading the bottom machine. If I only fish 1 time a month not so much. Don't get me wrong I can catch fish but its not because to my anchoring skills that's for sure.

Now here is an idea that I have been thinking about trying. When the wind and current are doing strange things to the anchor course I wonder what would happen if you threw out a drift sock? I think that might steady up the anchor course and hold you in one location instead of drift sideways on the hook. I'm always trying new stuff...

The dog days of summer is going to be upon us soon and the there will be plenty of time to practice with the anchor.

I use a 16.5 claw anchor with 20' of 3/8" chain and 600' of anchor rope. Rigged as a break away. I like to start looking at the bottom around 100' but prefer to fish 150' and deeper.

Here's the anchor I have.
http://www.westmarine.com/buy/lewmar--high-tensile-steel-claw-anchors--P005_153_002_004



   
ReplyQuote
Rich
 Rich
(@squid-row)
Illustrious Member
Joined: 22 years ago
Posts: 4097
 

Here is a little trick I used to deploy...

When I find a spot I want to anchor on and then drift a few times to determine course, I drop a marker buoy on one side of the spot, then move over a few yards and drop another marker buoy. That gives me visual goal posts to get in between.

In other words and for simplicity... If I am drifting due north, I put a buoy on the eastern edge, then the western edge and head south and drop the anchor and set back until I am between the buoys



   
ReplyQuote
jdannywhite
(@)
Eminent Member
Joined: 11 years ago
Posts: 27
 

I love this site! I have the same issues trying to anchor, but I didn't really think of asking the question here. Sounds like its not necessarily an easy thing to do, which makes me feel better:)

I was thinking of trying to drop a marker at my target spot, and then dropping another one close to where I drop the anchor. Then when I miss the spot, I should have a pretty good visual and be able to guess much closer the 2nd time.

If you see a guy in a bay boat anchored with 40 clorox jugs floating around him, give a shout. Its probably me:)



   
ReplyQuote
Larry Rowland
(@lwr37)
Famed Member
Joined: 16 years ago
Posts: 2552
 

I'll be looking for you out there "jugging"! Might as well add some hooks like we use to do when catfishing.



   
ReplyQuote
Wes Hudson
(@reznor)
Reputable Member
Joined: 16 years ago
Posts: 441
 

Guys this is a great thread. How did you design the break away anchor? Did you take the anchor to a machine shop and bore a hole
In the heel of it? I see a small hole in the heel of the lewmar anchor,
Not sure if its large enough for the turnbuckle to go thru?

Also, on the flying anchor, is it ok to cleat to the stern or use a short pc of rope once the anchor is dislodged from the bottom? Seems like it would be ok then? And lastly, has anyone tried those wreck anchors with the bendable tines?



   
ReplyQuote
Kenneth
(@matador)
Famed Member
Joined: 17 years ago
Posts: 3641
 

I think breakaway instructions are on this site.

Short piece of rope at stern with clip is best after anchor is up.



   
ReplyQuote
Larry Rowland
(@lwr37)
Famed Member
Joined: 16 years ago
Posts: 2552
 

The hole in the lewmar is big enough for the turnbuckle.



   
ReplyQuote
GetdaGaff
(@getdagaff)
Noble Member
Joined: 20 years ago
Posts: 930
 

Please do not Ever cleat off the stern to pull an anchor. Unless your boat is 40 feet long. If the anchor is really stuck you risk pulling that rear port corner under.

This is what happened to those football players a few years back in the gulf. They cleated a stuck anchor to the rear of the boat, it was sloppy out , and in a matter of seconds the boat flipped and 24 hours later when they found the boat there was only 1 guy left.

X2 to the 10th power ... saw this about happen once 42 miles off the hill ...



   
ReplyQuote
Page 1 / 3
Share: