SWC Forums
Pull up a chair...let's talk fishing.
feralcat glad it is coming together, I believe you should work away from using MOB and just hitting it as a temporary waypoint, then if you like it you can edit it and it will not be overwritten and it will remain in your machine.
I use the Mighty Mite and have no problems after the drift is figured out. If it gets stuck, the tine will straighten out a little and come free. I keep a short piece of pvc pipe, it gives the leverage to bend it back. 600 ft. of rode and 10 ft chain.
If you want to hit the mark, you need to minimize your sources of error. More scope= more room to be off the mark. Get one size bigger anchor than recommended for your size boat. I like a plow for hard bottom, never been a fan of Danforth but that's just me. Next, get a foot of 5/16" or 1/2" chain per foot of boat. Scope can be 2:1 when ground tackle is stout
When you fish, drop anchor on attempted anchor course. You will miss mark, no matter how many times you do a practice drift. Fly the anchor in a big, wide circle and head straight down stream of your mark for several hundred feet. When you get within 50' of your mark, kill throttles and let hook set and spin boat. You should be close to mark. If not, let out more line or repeat.
I use our gps anchor. If the boat swings you can use the up down left right buttons to get back on the spot, or work the along the ledge. Best thing to ever be put on a boat.
Someone mentioned a break-away system. Highly recommend it. I've been through some zip ties but haven't had to pull out the spare anchor in a couple seasons. I've lost anchors in the past and it sucks. Don't let the zip ties fool you, they'll hold under a lot of tension and if they start popping due to the current just add an extra one or two at the top of the shank. I use smaller ones just to hold the cable in place along the length of the shank. We've bent anchors trying to pop the zip ties and free the anchor.
The zip tie in the image look pretty stout. I have been stubborn and not used a visit to tie breakaway system. Because of that I have several twisted anchors. This year I plan to do the zip tie breakaway system but I i'm not sure what strength writing to use on the zip ties. If they are too thick they won't break after two thin they won't hold
Someone mentioned a break-away system. Highly recommend it. I've been through some zip ties but haven't had to pull out the spare anchor in a couple seasons. I've lost anchors in the past and it sucks. Don't let the zip ties fool you, they'll hold under a lot of tension and if they start popping due to the current just add an extra one or two at the top of the shank. I use smaller ones just to hold the cable in place along the length of the shank. We've bent anchors trying to pop the zip ties and free the anchor.
The zip tie in the image look pretty stout. I have been stubborn and not used a visit to tie breakaway system. Because of that I have several twisted anchors. This year I plan to do the zip tie breakaway system but I i'm not sure what strength writing to use on the zip ties. If they are too thick they won't break after two thin they won't hold
They are stout but definitely breakable. Cleat off on the bow and pull the line and the shank will cut them.
I love the feedback on this site. As Navy Divers one thing we used to do back in the early 90's off the coast of Charleston, SC when we were out spear fishing we would volunteer to set anchor buoys on the wrecks we were diving at for the fishermen. My suggestion is find a diver and take him out for a spear fishing trip and have him put a buoy on your favorite spot. Problem solved. No more anchor issues. Ensure you give him a decent anchor and line to use. The kevlar stuff will last forever. If you lose the buoy then you can just dive it again and all the line will still be there. YES, eventually some jack ass will steal it or it will get pulled away...but it was way less headache for at least 6 to 9 months of the year. We would rig the buoy with about 50 ft more line than the depth of the wreck to allow for sea state changes. We would also add about a 10-15 ft tag line off the buoy with a mooring eye so you could just pull up to the buoy grab the excess line and take a small piece of anchor line and run it through and back to your boat. When done just untie your end and it will run through and release.
PS it was always fun to dive the wrecks where there were about 3 or 4 fishermen fishing. Watching all the fish down there just swimming around their hooks with bait. I can recall a time I shot about a 20lb Sheepshead and swam it over to the guys line and hook and stuck it on there for him. He was laughing so hard when we got to the surface 10 mins later.
Someone mentioned a break-away system. Highly recommend it. I've been through some zip ties but haven't had to pull out the spare anchor in a couple seasons. I've lost anchors in the past and it sucks. Don't let the zip ties fool you, they'll hold under a lot of tension and if they start popping due to the current just add an extra one or two at the top of the shank. I use smaller ones just to hold the cable in place along the length of the shank. We've bent anchors trying to pop the zip ties and free the anchor.
The zip tie in the image look pretty stout. I have been stubborn and not used a visit to tie breakaway system. Because of that I have several twisted anchors. This year I plan to do the zip tie breakaway system but I i'm not sure what strength writing to use on the zip ties. If they are too thick they won't break after two thin they won't hold
You'll be hard pressed to find one that won't break. I double up two of the largest I can find (I believe they are 150lb) and have had no problems breaking when needed. Have friends that use a short piece of 1/4" nylon rope simply tied with a square knot. It will break when needed and seems to hold better than some zip ties.
