SWC Forums
Pull up a chair...let's talk fishing.
First, I did a search and can't find my answer. Second, yes, I'm caving. I've expressed my dislike of catching 40# fish with 150# line and massive rod/reel, it's just not sporting at all but nobody can argue with it's effectiveness.
End of rant
My question: (my notes from BOX & Midnight are on the boat) - what length leader are you running behind the planer?
I plan on using a Okuma TI 100 platinum reel 1/2 full of 250# power pro that I'm taking off one of my downriggers, to a bridle, to a length of 100# mono leader to a snap swivel.
I've been on boats and seen videos deploying the planer setup but don't remember leader length. I recall it being pretty long which seems to fly in the face of "your boat is your best teaser".
---------------------------------------------------
please let your answer be under 100 yds :lmao: (I just bought a pack of 100# 100 yd BillFisher 1mm leader)
Mike.. I run 100ft of 150lb ...
135 ft of150
Thanks guys
dangit, I should've asked before getting that 100#
I guess I'll use it for dolphin season and bottom rigs :wtg: and pick up some 150 for the planer reel.
You will be fine using 100#.
100 feet like mentioned above.
I use 100' of 80 pound mono behind the planner bridle.
I use 100' of 80 pound mono behind the planner bridle.
I had some 220 or 240lb Fluoro so I used that when I did mine. 100 will be fine. And somewhere around 100ft or so
100 of 100 it is then, might just try it out Sunday if I can get a crew up.
I use a whole roll of 150 fluoro.
Mike, 100lb will work but 130lb-200lb will give you a little better control over the fish when he is near the gaff. Plus I use mine for hi speed trolling. If your going to do the same you may want to look at going a little higher test lb. You don't have to have a massive reel, I use a 50vws, Pinnacle 100lb class bent butt, 130lb HC Momoi, 100' 130lb top shot.
So far 8s and 12s have been good to me. I may try a 16 one one day just to do it. As far as the drag goes I guess y'all find out soon!
You don't have to have a massive reel
I picked up 2 okuma Titus TI 100 platinum's off ebay at good prices. They hold 700 yds of 50# mono. I hope the drag is up to the task. I don't plan on trying to pull a 16, maybe an 8 or 12.
Ensure you do or have yearly Service done and they may last with moderate to minimal use. Not bashing your purchase, speaking from experience.
Hi baytro,
You already have gotten some good answers, but I saw my name so figured I'd give you my 2 cents worth.
As far as leader from the bridle to the rig, I use around 100 feet of 130# Jinkai. This is mono. I don't see any reason to use floro on a planner rod. (Your Billfisher leader is just fine.)
I go smaller on this set up than most, but it works for me. Reel is a 30 Penn International (30T, not the 30 wide) with upgraded Carbontex drag washers. 200# Power Pro braid, connected to the leader with a "grouper knot" (sort of like a mod Albright knot) with loops in the braid for the planner clips.
Rod is an 5 1/2 ft Outer Banks Custom Power Stick with Aftco roller guides. 50-130# Class.
Most of the time I am using a # 4 or 6 planner, but can go up to 12 if I want. That little Penn will hold them fine at normal trolling speeds. ( 5.5-7.5 kts). A 50 is fine, but for around here, really don't see any reason to go bigger.
Unless it is just a plane weird day, there will always be a red and black, or a purple and black rig on this rod. Mostly Islanders or BWC Jags.
I make my own bridles, but Larry (Reel Freq) makes some very nice looking ones using hollow core. He gave me one, and I look forward to trying it when it's time to change out.
Hope this helps out some.
Good Luck to ya!!!!
John (Midnight)
