SWC Forums
Pull up a chair...let's talk fishing.
Looking to add a 2nd gaff to my boat as one of my fishing buddies likes to drop things overboard....to be fair I did drop one of his rigs overboard last time out...
Currently I have a 4 ft tapered Aftco with a 3in hook...like it very much. Have found a couple instances that some additional reach would have been real nice to have. Thinking 8 foot with either a 3 or 4 inch hook.
Targeted species are Mahi, Wahoo, and hopefully some more YFT. Fishing from a 23ft center console.
Any suggestions on length, hook size, brand, etc?
Call Bob over at South Chatham Tackle. He will set you up with exactly what you need and it will outlast any other gaff out there.
second that Bob with South Chatham Tackle get the 8ft
8 is good for big fish when you want that extra reach. My secondary gaff is 8.
Tournament king guys use a 12, but that is hard to handle.
I personally use a 6 as a primary and I think it is perfect. I never understood why anybody would get a shorter gaff.
I use a 4' Aftco as a primary gaff, 8' Aftco secondary. Boat came with a 12' gaff and it will probably stay under the gunwhale for the rest of its life unless a hat flys out of the boat.
Sounds like I am on the right track with an 8 footer...any suggestions as to 3 or 4 inch hook?
Shot an email to South Chatham...always good to support the sponsors!
3" is fine.
Go to stickitgaffs.com. Quality product from mighty nice people. You will not want to drop this one overboard. We bought an 8 ft./4in.
interesting...you like the fiberglass over the tapered aluminum? The one I have is aluminum. I guess I worry about the flex of a fiberglass gaff that is 8 ft long.
I've been using a 4' and the 8' is hanging in the garage. 8' is too long the vast majority of the time. At times using the 4' I wish it were longer and have thought of cutting 2' off the 8'er in the garage~~ will do that tomorrow. Never needed anything wider than 3"....
8 foot is too long for offshore fishing, in my opinion. Too much going on and very cumbersome. I highly recommend a 6 footer with a fairly small mouthed hook on it. EJW has a great one.
Sounds like I am on the right track with an 8 footer...any suggestions as to 3 or 4 inch hook?
Shot an email to South Chatham...always good to support the sponsors!
Offshore Bob supports many events and supports or troops.
4 foot guys, why do you love your 4 footer so much? I used one once and hated it.
Gimme my 6' any day.
My 8' separates into two 4 foot sections, good for the slobs that need two gaffs. It's fiberglass and very little flex.
If you fish a lot in the Stream a 4, 6, and 8 will cover all bases, except Makos 100+ need a "Poon" unless you want to tear up stuff ... about lost a fellow overboard a couple of years ago sinking the 3rd gaff in a 150#+ mako (bent them all)... grabbed the seat of his pants or he would have went over ... maybe Dave has it on here somewhere but a good thread would be the proper way to gaff a nice fish or any fish ... I fish on quite a few private boats and charter fish on 2 to 3 boats (OI, CB, MH) and I'm amazed at the lack of skill/knowledge to the most important facet of putting fish in the box, particularly on private boats ... I still see folks attempting to gaff ahead of the leader ... tight lines ...
8 is good for big fish when you want that extra reach. My secondary gaff is 8.
Tournament king guys use a 12, but that is hard to handle.
I personally use a 6 as a primary and I think it is perfect. I never understood why anybody would get a shorter gaff.
At least one of the major kingfish tourney sanctioning bodies had an 8' maximum at one time. I remember a tourney where the second place finisher noticed that the only gaff visible on the winning boat was a 10 or 12 footer. An official inquiry got the winner disqualified, and the money moved up.
They may have changed the rule with all the huge boats they run now. I have seen some long gaffs used in videos, and wondered about that.