SWC Forums

Pull up a chair...let's talk fishing.

Gaff suggestions
 
Notifications
Clear all

Gaff suggestions

28 Posts
16 Users
0 Reactions
30.5 K Views
Jamie Blue
(@)
Famed Member
Joined: 20 years ago
Posts: 3660
 

If you fish a lot in the Stream a 4, 6, and 8 will cover all bases, except Makos 100+ need a "Poon" unless you want to tear up stuff ... about lost a fellow overboard a couple of years ago sinking the 3rd gaff in a 150#+ mako (bent them all)... grabbed the seat of his pants or he would have went over ... maybe Dave has it on here somewhere but a good thread would be the proper way to gaff a nice fish or any fish ... I fish on quite a few private boats and charter fish on 2 to 3 boats (OI, CB, MH) and I'm amazed at the lack of skill/knowledge to the most important facet of putting fish in the box, particularly on private boats ... I still see folks attempting to gaff ahead of the leader ... tight lines ...

Gaffing preferences have been beat to death almost as bad as planer rods.



   
ReplyQuote
Jamie Blue
(@)
Famed Member
Joined: 20 years ago
Posts: 3660
 

8 is good for big fish when you want that extra reach. My secondary gaff is 8.

Tournament king guys use a 12, but that is hard to handle.

I personally use a 6 as a primary and I think it is perfect. I never understood why anybody would get a shorter gaff.

At least one of the major kingfish tourney sanctioning bodies had an 8' maximum at one time. I remember a tourney where the second place finisher noticed that the only gaff visible on the winning boat was a 10 or 12 footer. An official inquiry got the winner disqualified, and the money moved up.
They may have changed the rule with all the huge boats they run now. I have seen some long gaffs used in videos, and wondered about that.

Might have been FLW which is now defunct. They had some weird rules. SKA is 12 feet



   
ReplyQuote
Bryan Hunt
(@)
Prominent Member
Joined: 18 years ago
Posts: 628
 

Cheap priced good quality........it will go overboard eventually. 5'-6' w/2" hook. Plenty on a big boat.

I like the same hook with a 4'- maybe 5' on a cc boat.



   
ReplyQuote
John Rakoci
(@)
Noble Member
Joined: 14 years ago
Posts: 2331
 

Cheap priced good quality........it will go overboard eventually. 5'-6' w/2" hook. Plenty on a big boat.

I like the same hook with a 4'- maybe 5' on a cc boat.

Eventually they ALL go overboard.



   
ReplyQuote
Will Hill
(@captwillie)
Estimable Member
Joined: 19 years ago
Posts: 102
 

I have 4' and 6' aluminum gaffs with 3" hooks. I've never needed any other gaff.

For makos all you have to do is gaff them in the top of the mouth and tail rope them with a dock line. Then you can cleat them off to pull them backwards to drown them before pulling them over the side. You don't want a live mako in the boat!



   
ReplyQuote
AboutTime2Fish
(@abouttime2fish)
Prominent Member
Joined: 16 years ago
Posts: 744
Topic starter  

Decided on the 6ft with 3 inch hook...thanks for all the input.



   
ReplyQuote
Drew Maultsby
(@)
Prominent Member
Joined: 17 years ago
Posts: 806
 

Having not lost one overboard, YET, would the typical 6 foot aluminum gaff sink or float, if the handle was air tight.



   
ReplyQuote
John Rakoci
(@)
Noble Member
Joined: 14 years ago
Posts: 2331
 

Chopped 2' off the 8'er that's been hanging in the garage 2 years. The 4'er will stay on the boat and will try the (now) 6'er. 8' was unwieldy and uncomfortable to use. Now to get out and use it!



   
ReplyQuote
AboutTime2Fish
(@abouttime2fish)
Prominent Member
Joined: 16 years ago
Posts: 744
Topic starter  

The Aftco 356 I got (6 ft, 3inch hook, 5/16 inch hook diameter) is supposed to float...but I bet just barely. Guessing if it gets more than 10-15 ft from the boat your chances of finding it are slim, but I have not tested either of my gaff's to prove/dis-prove thier floating abilities.

Looks like I won't get a chance to bloody it until after duck season at this point....YFT in Feb???



   
ReplyQuote
John
 John
(@)
Famed Member
Joined: 20 years ago
Posts: 3801
 

We carry one 4 foot 3 1/2" hook, and one 6 foot 3 1/2" hook gaffs. 4' is Sea Striker, and 6' is Aftco tapered aluminum. Also a 2 foot 2 1/2 inch hook shortie for grouper.
Don't count of them floating long!!!
Also, just like your hooks, it's a good idea to put a file to these once in a while and keep sharp.

If anyone is interested, I have the following gaffs, I'll make you a good deal on:
6 1/2 foot-5" hook
6 foot 2 1/2" hook
7 foot 2" hook Fiberglass Custom
4 foot 2 1/2" hook

I second Bob at South Chatham Tackle. Quality stuff....

Good Luck!!!



   
ReplyQuote
CC
 CC
(@)
Prominent Member
Joined: 20 years ago
Posts: 768
 

I got a 10' aluminum one if anyone is interested. cant remember hook size. I dont ever use it since im spearfishing mostly.
Come and get it cheap!

pm me or email seasea67@gmail.com



   
ReplyQuote
4bouys
(@4bouys)
Reputable Member
Joined: 13 years ago
Posts: 284
 

Put some spray foam in the end of the gaff and that will help it float better and doesn't hurt the weight or ability of the gaff. Redneck engineering at it's finest!



   
ReplyQuote
Eris
 Eris
(@back-lash)
Famed Member
Joined: 22 years ago
Posts: 2978
 

my main gaff is an 8ft I also have a 12 ft 2 piece gaff onboard so that gives me a 6 ft an 8ft and 12 ft the 12 ft comes in good esp when ure in a tournament and that big girl just wants to lay out there ,,,, it sure has made me some $$ but for the most part It wont be used as a 12 footer 2=3 times a year
as for the aftco fiberglass gaff I was lucky enough to try the prototype when I gffed a 30 lb cobia it shattered no more afco for me



   
ReplyQuote
Page 2 / 2
Share: