SWC Forums
Pull up a chair...let's talk fishing.
I have a 2011 Carolina Skiff with a 90 hp Suzuki motor on it. It doesn't have an hour meter on the dash. Question is can the hours be checked on the motor. Even if I have to take it to a dealer. Maybe wanting to sell and everyone wants to know the hours. Not sure what is considered high or low hours. Thanks in advance
Yeah they can be seen with a computer or OBD type device
If it's a Suzuki, turn the ignition (but not all the way to crank it). Watch your needle for rpms & it'll point to it's hours. For example, when I turn key, needle points somewhere between 2-3000 rpm, meaning my hours are between 200&300, accurate bc I'm right at 250hrs on the computer. A dealer will also be able to hook u up & get more info a buyer will probably want.
Thank y'all a lot for the info. I will try that tomorrow and see what it is.
From what I was told at Charles when I bought my boat 2 years ago, the average person put 100 hours a year on a boat. Don't know how accurate that is. Just depends on how often you can take it out
I have a Suzuki. Use the RPM gauge as instructed above. Also, I've had mine about 2.5 years and have put 300 hours on it. Probably 75% are trolling hours.
It worked if that is right. It said 175 and that is probably about right. Don't use it that much and last summer only a handful of times. May have it checked if I have to. Not really any one close to me.
Wonder if this will work on an 05 mercury 4-stroke. I troll a ton for stripers with it and am curious how many hours are on it.
My family has a 1980dlx that gets used a ton during the summer and I don't think we ever put a 100hours on it in a year. Load the kids up and ride 10 mins to masonboro stay 4 hours and come back. Unless we go trolling for Spanish or take a little boat ride motor never runs for more than 15 minutes. The way most inshore boats are used in this area, they just don't get a lot of running hours compared to their use.
The RPM gauge reading on Suzuki is correct. I use to use my DLX to make a 15 minute run to striper spot, slow troll with trolling motor for hours then run back to ramp. Purchased new in 2006 with Suzuki 115, now has about 290 hours. Due to work load, I put more time running on muffs now than fishing! Keeping clean fuel through system.
I have heard of the average 100 hour yearly thing before, and I can not understand that..LOL!
I have a 2008 Carolina Skiff 258 DLV and a 2002 McKee.
I do not use the McKee much now since I purchased the CS and I put about 150 hours on it a year. Used to be at least 300 yearly.
I put approx. 300 a year on the CS now even with having to see too many doctors on beautiful days wind wise.
I am having another hour meter put on the CS now because I can not read the hours. I use the meter to give me an indication of when to service the engines which I do about every 80-90 hours.
And yes, the dealer should be able to give you the exact hours with a break down on time at different rpms.
Beware that a meter does not usually reflect the actual engine hours unless it is "connected" to the engine and not just the ignition switch. Just turning (or leaving) the switch on will run the hour meter.