SWC Forums
Pull up a chair...let's talk fishing.
Must be cursed my last three trips out CB Inlet have been at low tide when I left in the morning. Hesitate to post this but feel it's needed. Fished Wednesday and left at 4:45 am from CB Inlet dead low and back side of a full
Moon . I know how to read the inlet /breakers and bumped bottom softly and marked 4.5 to 5.8 going over the bar between bouy 4&3.
All I'm going to say is when you read a report about plenty of water you need to consider the source and how big the boat is that's running out and reporting.
I draw 3.5 feet to make it so somebody posting plenty of water at 5 ft. Low tide
Doesn't leave me a hell of a lot of room. I watched the dredge Merritt work for four days at $14,000 per day and the only place that needed work was the channel between 4&3. There's still no real water there and I would love to know what they did for four days and who signs off for them to get paid ?
Just me venting my frustration. One Nor'easter and we're back to square one.
I know the option is Masonborough Inlet but the temptation to use CB and save two hours a day is very tempting.
Did you go south of the #3 can? They didn't dredge the marked channel from #5 to #1
Did you go south of the #3 can? They didn't dredge the marked channel from #5 to #1
Saw the latest from army engineers as of 5/25.
Deepest water at low tide is on the wrong side "South Side" of can # 3 & 1.
I couldn't understand why the Merritt was pumping sand into the channel as its presently marked but they cleared a channel on the wrong side of the last two cans down to 6 feet at low tide. After looking at the survey I totally understand why I've been just barely making it. Hope they eventually move the bouys to correctly mark the channel.
It seems that everytime the Merritt works here at NRI it causes more problems than it fixes. They are charging a lot of money per day but they show no results
The coast guard is in charge of moving the buoys. Since its a seperate gov't entity it takes them a while to get the new survey and have the buoys moved to the new channel. I've heard there are only two USCG buoy tenders for inlets on the east coast so you can imagine the delay in time. I use Lockwood every day so I know how "the struggle is real"
Two weeks ago around CBI and last week at NRI, we saw the survey boat going in and out and all about the buoys for both inlets. What do they do with the information they get after a day cruising?
u gotta go to the south of the last two green cans... I had plenty of water but am pretty sure there wasn't enough in the actual channel if I had followed the channel..
I have never been out of CB inlet, going out tomorrow. Would someone be willing to draw a few lines on a Google maps screenshot so I can understand how to navigate it safely? Or provide a link to somewhere with that type of information?
http://www.saw.usace.army.mil/Missions/Navigation/HydrographicSurveys/InletsCrossings.aspx
Survey of inlet. Has way points for inlet
Seahunt202
Went out it today at dead low tide. Not bad, just read the water, and stay south of can (green) 1 and 3. (the last 2 going out.
Good Luck
Anyone know if the buoys (can #3 and #1) have been moved by the Coast Guard since the dredge left?
Do we still stay south of the last two cans?
We stayed South of them yesterday.
Last I knew the CBIA was indicating hugging the North side of the 1 and 2 green markers. Sounds like something may have changed. I draw 32"-36" w/motors trimmed up and have come and gone at low tide following this plan about a half dozen times in the past month and have had no problems other than cleaning the green paint off my hull. Lets talk about what it would take for a more permanent solution.