SWC Forums
Pull up a chair...let's talk fishing.
Can you use an onboard battery charger (mine is an XPS system from bass pro), like the ones you use to charge your trolling motor battery ( mine is an XPS 12V deep cycle), to charge your marine starting battery (mine is 12V XPS starter)?
My starter is currently hooked up and seems to be working, and I couldn't find much info online.
Let me know if I need to remove it lol ๐
I have an onboard charger. Not sure of the brand, but it is a 3 bank system. One bank to each battery. I leave it hooked up and charging if I'm not planning on using the boat for a month or longer. I would say your good, if I'm reading your question correctly.
You should be fine. Most modern chargers do it correctly: steady charge, topping charge, then float charge, all automatically. (prefered method for lead-acid)
Well I left it over night, in the morning the charger was "green" ready to go, but the battery was dead. Would barely even energize the relays in the engine lol.....
Oh well new battery time.
Well I left it over night, in the morning the charger was "green" ready to go, but the battery was dead. Would barely even energize the relays in the engine lol.....
Oh well new battery time.
Yep. It probably has an open cell. The charging current will be next to nothing and that will fool some chargers into shutting down and tell you battery is full.
My experience is leaving charger plugged in all time will evaporate water from lead acid batteries causing open cells even if charger says it has float system. To expensive to replace if not going to be able to get back and unplug for some time.
Had it happen to trolling motor with xps onboard system and trickle charger on ATV.