SWC Forums
Pull up a chair...let's talk fishing.
We've bent lots of anchors, have paid to straighten them and bent them again.
Never would we dare take them back and blame a retailer! Moved to more expensive $200 dollar ones if you are doing 50 plus stops a day on gag spots you will end up bending them...
Don't know what the name of the one my boys now use but it will never be part of an anchor cemetery!
Good luck with your next one.
Did it have any bad marking on it? If it did it probably got caught on more than sand. If not I would bring that to their attention and see what they say.
I'll add to the "been a happy customer" chorus and find their negative treatment of someone a surprise.
Also, the remarks above about steel quality in anchors is spot-on. For fun, look up the huge controversy regarding Rocna anchors a few years ago that occurred when they moved production to China.
It was so costly that the founding family of Rocna had to relicense manufacture to attempt to rebuild their brand and the company that purchased manufacturing license has production in Canada.
The issue was quality control. Some anchors were rock-solid, some were demonstrably crap; some had steel so soft it could easily be dented by a regular nail (when design of the anchor required steel of a certain strength).
It's true that Rocna had some other problems going on at the time, but the controversy over the steel was a game-changer and brand-breaker.
My comment to anyone that asks...don't go cheap on anchor gear. They are (or can be) a piece of safety gear...a lifeline, an emergency brake. When you need it to hold, it NEEDS to hold. The sad thing about the Rocna situation was that they HAD a good reputation and destroyed it with the move to China. There are probably people that STILL don't trust the brand after several years of rebuilding.
(My anchoring experience includes anchoring out a 9000 lb sail boat in a hurricane, as well as in several 50+ knot storms).
Ok people. Just getting back in service now and I'm not surprised by some of these replies. It was a 75 pound anchor not 7.5. It was a $177 dollar anchor not a $75 one. It's not the fact that someone didn't reace an anchor, it's the fact that they went back on their word and then treated me like a piece of crap for asking them to back it up. The anchors I usually use are made locally and can be pulled on for days without the slightest bend. This one was put down one trip, not stuck at all and both flukes were peeled back like a banana. I pay the same price for a local welder to make an anchor that is 100% guaranteed against bending or breaking and will never buy from ace again. And for the ones who doubt that I know what I'm talking about. I run a commercial snapper boat in 20-100+ fathoms 3-5 days a week so I know a little about what a good anchor is and what size I need. Thank you. That is all.
It was a $177 dollar anchor not a $75 one.
In all candor, I'm not "up" on what constitutes a 'good anchor' for snapper fishing, so please take this as a general comment and not aimed at you (or your experience) specifically.
I will say that I would never pay ONLY $177 for a 75 lb anchor if I really needed that piece of gear to do its job...which in my case is "hold my boat where I put it no matter what is going on."
I paid $350 or thereabouts for my 35 lb Manson Supreme years ago. I have found that good anchors costs money.
Again, my experience includes (successfully) anchoring in a hurricane and other big storms, so maybe there's a big difference there...a day-hook for fishing vs something one's life depends on.
Just saying...$177 for a 75 lb anchor seems "too good to be true" from my perspective.
Hope you get it sorted out with ACE Marine to your satisfaction...whatever that means for you.
U get what you pay for. Front of my boat has two 90 pound danforrths..... We use a pot hauler to bring them up into the pulpit . They have been there for 20 years..... Bent a few shafts.... Put them in a vice and used a sledge hammer to "fix" them.
If you bent a 75 pound anchor with your sisu then the anchor is junk and should have not been bought to begin with.... Guy with a downeast boat should know better than paying $170 and expecting same quality as a danforth ....hooker also is not a bad anchor....
Read the OP. He was in a bind when he got it. It wasn't like he was shopping around for 2 weeks for an anchor.
Read the OP. He was in a bind when he got it. It wasn't like he was shopping around for 2 weeks for an anchor.
And this is one of those threads that make people stop posting.
Get what you pay for!!!! $175 for a 75 pound anchor???
It sucks for the OP but to me, bent is a condition indicative of normal wear and tear for an anchor.
A broken weld or torn metal would be a condition that would indicate defective.
with that size anchor you could have been 'half stuck'/wedged on a ledge and never know it with the power it takes to pull it/fly it.
hammer it out and use it till you hang it/lose it, or chalk it up to a really nice doorstop. :wtg:
This thread seems to be about anchors vs what the OP says the issue actually is. They said they would replace the anchor if it failed prematurely and then when it did they didnt claiming abuse. And to be honest they could have not replaced the anchor in a polite manner but it sounds like they climbed up on a high horse and pissed someone off. And that someone found an avenue to speak about his displeasure. As a retailer its cheaper to eat the cost of a single item of nominal value than it is to lose a customer and let thier actions be known to others who may not shop based on one experience. Most retailers realize this and take care of you. In this case they didnt and here we are.