SWC Forums

Pull up a chair...let's talk fishing.

Downrigger line
 
Notifications
Clear all

Downrigger line

12 Posts
10 Users
0 Reactions
25 K Views
Donald Boltz
(@)
Active Member
Joined: 19 years ago
Posts: 10
Topic starter   [#53567]

Wondering about opinions on best downrigger line to use. Have been using welding wire for decades. Time to replace. Are their better options?



   
Quote
greg goober
(@)
Estimable Member
Joined: 16 years ago
Posts: 87
 

I use braid with a mono top shot. If I remember correctly, though, some of the older downrigger's have spools that will not work with braid- e.g. the older cannon uni trolls had two piece spools that do not work well with braid.



   
ReplyQuote
AboutTime2Fish
(@abouttime2fish)
Prominent Member
Joined: 16 years ago
Posts: 744
 

Braid is the way to go. No more 'singing' cable in the water. You can get it packaged specifically as downrigger line. Think it's 200lb line. Not sure why you would want a mono topshot unless you are rigging it as a poor mans planer rod.



   
ReplyQuote
steve arnold
(@steve-a)
Reputable Member
Joined: 21 years ago
Posts: 402
 

Braid is the only way to go in my opinion.



   
ReplyQuote
David Blackmon
(@spacesaver)
Estimable Member
Joined: 14 years ago
Posts: 213
 

We have been running 150 lb braid on our old Penn downriggers for at least the past 7-8 years with no problem at all. Some will say 150 is too small, but for king fishing or anything that is below 4 or 5 knots it works just fine.



   
ReplyQuote
Steve Hesltine
(@stevehes)
Prominent Member
Joined: 17 years ago
Posts: 646
 

I have 200 braid on my Canons and it's so much nicer than the metal I used to run, deeper and quieter.
I do have the rubber stubbies to get hold off to pull the weight out



   
ReplyQuote
Clark Beeson
(@)
Reputable Member
Joined: 21 years ago
Posts: 200
 

Switched from 130 lb wire to 200 braid. First trip I thought something was wrong with the boat because it sounded different...



   
ReplyQuote
Brad Honeycutt
(@cw66)
Honorable Member
Joined: 10 years ago
Posts: 659
 

i changed to braid 2 years ago.



   
ReplyQuote
frederick meine
(@meine001)
Estimable Member
Joined: 14 years ago
Posts: 112
 

I switched to braid and love no longer hearing the humming wire ! I feel like my catch rate has gone up as well— maybe the humming scared some fish off? But i do have trouble lifting the weight back into the boat without hurting my hand. What are the rubber stubbies one of you mentioned?



   
ReplyQuote
William McCann
(@werewolf0711)
Famed Member
Joined: 15 years ago
Posts: 3133
 

What are you using it for? Slow trolling or offshore with planers and dredges and such? We use ours for slow trolling only so I use a much lighter braid than most. If using offshore you will need to get heavier around 250-300#. Braid is by far the better choice



   
ReplyQuote
Steve Hesltine
(@stevehes)
Prominent Member
Joined: 17 years ago
Posts: 646
 

I guess they're called a snubber officially.
Mine are a different and came with the downriggers so not sure of the brand but look identical to there :

https://www.amazon.com/Scotty-370-Downrigger-Weight-Snubber



   
ReplyQuote
Donald Boltz
(@)
Active Member
Joined: 19 years ago
Posts: 10
Topic starter  

Thanks for everyone's input. Interestingly 100% braid recs. Since I do a lot of offshore fishing, going with 250 lb braid. Thanks again.



   
ReplyQuote
Share: