SWC Forums
Pull up a chair...let's talk fishing.
On my 27 Game Fish the primer bulbs are staying extremely flat. I am not having any problem running or cranking, but I would think that the injection system is having to work pretty hard to suck fuel from the tank.
Changed the gas filters and found no water, the gas cap cap always has a lot of pressure on it when loosened, I think that is normal on newer boats. I was thinking of removing the check valves at the top on the fuel tanks going to the gas lines to see if that would solve the problem. I did that on my old Ranger and it solved the issue. But those tanks had breathers that breathed in and out this one does not, only in. Anybody else done this or had this issue ?
Reel Living
27 Game Fish
150 Yamaha's
88 G/W pulled valve--99 24 Albie pulled valve---40 hp Merc/Force shop pulled valve. No more problems.
the gas cap cap always has a lot of pressure on it when loosened,
Is it pressure or vacuum release? Blow through the vent line. A partial blockage of the tank valve (by itself) wouldn't cause pressure, a stuck vent valve would cause a vacuum and eventually affect running (evidenced by flat bulbs) ...
I thought it was air coming out, certainly going across my fingers. I'll check the vent to see if it is blocked. The tank check valves look fine but I took them out anyway, didn't want to do all that knee work for nothing. Thanks for the reply.
Sprayman I fish out of a 2015 Gamefish 27 and have experience somewhat of the same issue. Last summer was the first year having the boat and we had made multiple 40-50 miles runs until later in the fall we were out wahoo fishing, fished all day no issues until we reeled up the lines to head home. Soon after getting the boat on plane we lost power in one motor. The motor was just not getting any fuel, bulb was flat. Messed with everything that we could think of but just couldn’t get fuel to the motor. After limping our way in from 40 miles out with one motor (one very slow ride home by the way) we took the boat back to the dealer and the mechanic there told us he thinks it was the check valve from the tank that just created an air lock and held the valve closed. He removed both valves off each fuel line and replace the bulbs with different ones and said we shouldn’t have the problem again. That being said there still seems to be a huge vacuum in fuel tank, and once again this year we lost power in one of the motors but by just opening up the gas cap and releasing the vacuum and letting it sit for a few minutes it seems to fix the issue and the motor cranked right back up. So unfortunately I’ve made a habit of just reaching up and loosening up the gas cap periodically throughout the day to hopefully prevent the problem. So clearly we are still having some issues with something creating an air lock and causing the motor to starve for fuel. As Curmudgeaon has suggest above maybe it is a stuck vent valve (which I will look into) but if you or anyone else has any suggestions I’d love to hear them.
I have never had my primer ball go flat, but My tank has always had a positive pressure when it is hot out. I did a lot of reading on the matter and apparently (from what i read, please someone chime in if i a wrong) since 2012 the EPA has made the boat world convert to a closed system similar to cars. The caps are only designed to vent if the pressure is greater than a certain PSI.. I think it was 7 but not sure? So i do the same thing, i make sure my cap is loose occasionally. Also, the new cap thread patterns are different, so you cannot just change it to a standard vented cap. I am interested to hear what others are experiencing.
I think the air I was hearing was vacuum and not pressure that I was hearing as suggested. But I think that I may have solved the problem. The breather has an allen screw on the outside, I took it out and blew into the port, out spewed salt water. I repeated this a few times and each time water came out but a little less each time. Finally took out the inspection plate and removed the hose at the top of the breather. It has a long drop loop which had filled up with water over the last couple of seasons from running in rough seas I guess. Anyway this creates a much stronger vacuum on the fuel tank " I THINK " . I have the boat at home now, ran from the storm but will know for sure next weekend and will post the results if I am correct. But this will be a part of my normal routine from now on, just loosen the hose at the top and lower and let it drain into the bilge. Hope this helps someone else.
Reel Living
That is great, i hope that will solve your issue. Where is the breather that you speak of? is it at the fill cap?
On the outside of the boat hull just below the fill cap. Mine is a 2013 I would guess they would be the same. When you take an allen wrench and screw out the plug there is a screen inside the cap for a strainer. That leads into a nipple that makes a loop down and back into the fuel neck just below the fill port. You will need to remove the hatch cover on the side wall of the gunnel to get to that loop.
Great. I will take a look, however mine is a different setup.. I will take the cover off and see if thats the issue, thanks again!