SWC Forums

Pull up a chair...let's talk fishing.

Gel coat work
 
Notifications
Clear all

Gel coat work

15 Posts
9 Users
0 Reactions
28.9 K Views
russell
(@)
Honorable Member
Joined: 16 years ago
Posts: 513
Topic starter   [#43738]

Can anyone recommend a gel coat person in wilmington, cb area. Got a small spot on the front side strake that needs touch up.
Also wanting to know if anyone can give me an idea of what it should cost. The area is relatively small. Probably 6" x 6" area on the bottom strake ( boat is an 04 carolina skiff). Typically I would do it, but have too been too busy with work lately. Thanks.



   
Quote
Mark Cogdell
(@markc)
Reputable Member
Joined: 20 years ago
Posts: 211
 

call Saltwater marine and talk to Joel about it. The guy they get to do the gelcoat/fiberglass work there is like a wizard. I've seen him make all kinds of repairs on fiberglass and when he is done you can't tell there was anything wrong.



   
ReplyQuote
Barry Turano
(@barryturano)
Famed Member
Joined: 17 years ago
Posts: 2720
 

call Saltwater marine and talk to Joel about it. The guy they get to do the gelcoat/fiberglass work there is like a wizard. I've seen him make all kinds of repairs on fiberglass and when he is done you can't tell there was anything wrong.

Tony the Boat Doc. Does the work for Saltwater Marine



   
ReplyQuote
Dustin Daniels
(@bosunscrew)
Honorable Member
Joined: 20 years ago
Posts: 421
 

Tony (910) 232-0658, Beau Johnson with Johnson Custom Boats (910) 232-4594 and Jimmy Bedson (910) 232-0570 all do good work!



   
ReplyQuote
Tim elrod
(@)
Noble Member
Joined: 18 years ago
Posts: 1002
 

I have been down this road recently and I will tell you that all of them are busy as hell and you will need to call multiple times to get in touch with them and it will cost about six times more than you think it will.

Tim



   
ReplyQuote
russell
(@)
Honorable Member
Joined: 16 years ago
Posts: 513
Topic starter  

Thanks for the quick replies. Already called saltwater marine ( they are awesome) and got the guy they recommended. Sounds like he is the man. Anyone want a take a gander about what I'll be looking at price was? I know without seeing it is all relative, but it isn't very big. Anything more than 250 or so I can make time. Don't want waste anyone's time for a small job either.



   
ReplyQuote
russell
(@)
Honorable Member
Joined: 16 years ago
Posts: 513
Topic starter  

Even that is more than i really want to pay. Kills me to pay someone to do something I know I can do. Stubborn and cheap I guess.



   
ReplyQuote
SuperGrouper
(@supergrouper)
Trusted Member
Joined: 21 years ago
Posts: 62
 

$60-80 an hr is going rate not including material.



   
ReplyQuote
(@curmudgeon)
Noble Member
Joined: 21 years ago
Posts: 1317
 

Even that is more than i really want to pay.

One thing about being the customer, you can always vote with your feet. Course that usually means you didn't get what you went after, but you surely didn't over-pay ... :shrug:



   
ReplyQuote
William McCann
(@werewolf0711)
Famed Member
Joined: 15 years ago
Posts: 3133
 

Typically any small spot is going to run around $80-$100. And by small I mean about the size of a dime and smaller. Roughly. It isn't cheap by any means. But this would be filling a void like spot. Without pics of the damage its kinda hard to say exactly the type of involvement in the project.



   
ReplyQuote
Tim elrod
(@)
Noble Member
Joined: 18 years ago
Posts: 1002
 

The quotes I got were a lot higher than that. I had a pencil eraser sized ding in non-skid and the quotes were $200-$300 with most being around $275. I had another spot that was about dime size in smooth gel coat and not deep at all and the three quotes I received were all around $200.



   
ReplyQuote
William McCann
(@werewolf0711)
Famed Member
Joined: 15 years ago
Posts: 3133
 

The quotes I got were a lot higher than that. I had a pencil eraser sized ding in non-skid and the quotes were $200-$300 with most being around $275. I had another spot that was about dime size in smooth gel coat and not deep at all and the three quotes I received were all around $200.

Are you referring to quotes from those listed above? If so I can believe it. I don't live down that way so I had a guy local to me quote me, but never did end up taking it. Just ended up filling the spots myself.

I got some quotes for my engine cowl that got 2 places knocked in it by a reel. Maybe 1/10" wide by and 1" long in 2 places. Most wanted from $800- your better off buying a new cowl. Same place local said he would do it for $400. Theres a lot of body shops that special in fiberglass and can do some small stuff. You can check with them as well



   
ReplyQuote
Tim elrod
(@)
Noble Member
Joined: 18 years ago
Posts: 1002
 

Yes. Those listed above.



   
ReplyQuote
russell
(@)
Honorable Member
Joined: 16 years ago
Posts: 513
Topic starter  

Thanks for all the input guys. Looks like I will be making time for this project myself. Can't shell out that kind of dough for something I can do myself. If it were a nicer boat in a more visible spot, maybe, but not underneath a 2004 Skiff. Thanks again, and hope anyone on the water this weekend is safe, and catches em' up.



   
ReplyQuote
Capt. Michael
(@sailormike)
Estimable Member
Joined: 14 years ago
Posts: 156
 

Check with tony williams te boat doc he has always been resonable



   
ReplyQuote
Share: