SWC Forums

Pull up a chair...let's talk fishing.

Getting Penn Torque...
 
Notifications
Clear all

Getting Penn Torque 9 Spinning Reel Ready For Bluefin Tuna Casting In NC

13 Posts
5 Users
0 Reactions
25.6 K Views
albemarle24express
(@)
Prominent Member
Joined: 18 years ago
Posts: 677
Topic starter   [#42508]

Step one was to have the handle replaced with an aluminum ball knob from jigging world.
Sent the handle up to them and they replaced the knob at no extra charge. Looks great
and it's very smooth. Will work well for casting poppers and stickbaits.
Loaded with 450 yards of JB 100# hollow core braid. Will be using a twisted leader
for casting.

Jigging World Aluminum Ball Knob For Penn Torque Spinning Reel



Next was to remove the two seals on the reel to make it easier and smoother to turn.
Since the reel will be used on a boat it does not have to be 100% waterproof as we don't plan to submerge the reel. Spoke to the Penn factory tech who said this was ok as long as you don't submerge the reel.

First step is to remove the spool. Then pull the drive plate seal, spool shim and locating washer off the shaft. Next remove the two screws on the plastic rotor nut cover and pull
the rotor nut cover off the shaft. The spool shaft seal will be under the rotor nut cover and you will be removing it. Next remove the rotor nut with an open end wrench and the rotor cup will come off. You then need to remove the rotor seal which is in the underside of the rotor cup.
The spool shaft seal and rotor seal are the two seals you are removing from the reel.

To the right of the picture you can see the drive plate seal, spool shim and locating washer together. The plastic rotor nut cover and two screws are in the center of the picture
and the screwdriver tip is pointing to the spool shaft seal. Left is the rotor nut

Rotor seal on the underside of the rotor cup

Rotor Nut

The Two Seals You Are Removing
Made the reel much smoother



   
Quote
warren barton
(@rockhound)
Noble Member
Joined: 19 years ago
Posts: 946
 

I gotta,ask,Why buy a reel you gotta modify to make it smoother? Why not buy something that you're gonna be happy with off from the beginning? I sure as hell don't have to start taking things off my shimano to make it smoother.



   
ReplyQuote
albemarle24express
(@)
Prominent Member
Joined: 18 years ago
Posts: 677
Topic starter  

There is nothing wrong with a Penn Torque Spinning reel stock as it's designed to be 100% waterproof for use in a kayak or in the surf but there is a trade off for a 100% waterproof reel. For casting poppers or stick baits out of a boat a 100% waterproof reel with the ability to be submerged is not a requirement and therefore you can remove the seals to make it smoother.

And no I would not submerge a Shimano Stella reel. Your Shimano reel is not waterproof

The Penn torque reel is a fantastic reel and should I need to go swimming with it I can put the seals back in.
I was happy with the reel to begin with and a whole lot happier now that is serves as a dual purpose reel.



   
ReplyQuote
Chris McCaffity
(@)
Noble Member
Joined: 15 years ago
Posts: 1424
 

Are you planning to eat the Bluefin Tuna?



   
ReplyQuote
albemarle24express
(@)
Prominent Member
Joined: 18 years ago
Posts: 677
Topic starter  

From what we have read the smaller bluefin tuna are good to eat. Maybe by the first of next month the smaller fish will be there and we will have the chance to try one.

If the fish are a larger class we will troll and stand up fish with a harness rather than casting and jigging freestyle. We plan to release any larger fish.



   
ReplyQuote
Chris McCaffity
(@)
Noble Member
Joined: 15 years ago
Posts: 1424
 

I would like to encourage all catch and release fishermen to consider keeping any legal fish that looks like it may not survive and donate it to a soup kitchen or food pantry.



   
ReplyQuote
Rich
 Rich
(@squid-row)
Illustrious Member
Joined: 22 years ago
Posts: 4097
 

Can we not turn this into an argument about fishing practices and just enjoy and learn from the detailed thread on reel upgrades?

Wayne that looks like a nice set up and casting to bluefins sounds like a blast. Good luck and hopefully you will get a shot at them this spring. Surface fishing is always fun, doesn't matter if it is bluefins or bluegills!



   
ReplyQuote
Jon Tennant
(@jon)
Trusted Member
Joined: 23 years ago
Posts: 67
 

If you do get into the large ones and get tired of getting the stand-up butt whooping start throwing those poppers hookless. Makes for some incredible strikes and some good pullage till they decide to give it back. Best of luck on the fishing and bring back some vids to share.



   
ReplyQuote
albemarle24express
(@)
Prominent Member
Joined: 18 years ago
Posts: 677
Topic starter  

If you do get into the large ones and get tired of getting the stand-up butt whooping start throwing those poppers hookless. Makes for some incredible strikes and some good pullage till they decide to give it back. Best of luck on the fishing and bring back some vids to share.

Good idea, thanks



   
ReplyQuote
Chris McCaffity
(@)
Noble Member
Joined: 15 years ago
Posts: 1424
 

Bluefin on a spinning reel sounds like a lot of fun. Good luck!



   
ReplyQuote
Chris McCaffity
(@)
Noble Member
Joined: 15 years ago
Posts: 1424
 

Just want to clarify that I was not trying to start an argument about angling practices. I practice catch and release with sharks on almost every trip offshore. This thread reminded me of a story I read recently about a big Tiger Shark being donated to a soup kitchen in Texas. Donating a giant Bluefin Tuna could draw national media attention. You could keep a chunk to eat and take some awesome pictures with a little reel and big fish. Try making some sushi and/or ceviche and please post any pictures if you decide to keep one.



   
ReplyQuote
albemarle24express
(@)
Prominent Member
Joined: 18 years ago
Posts: 677
Topic starter  

Going to cast a 10" swim bait to the tuna which will weigh about 7.8oz with the hooks, split rings and ball bearing swivels. Many people use two Owner
ST76 treble hooks on the swim bait but from talking to people who fish for bluefin on a casting rod the treble hooks do a lot of damage to the fish.

Our plan is to tie an assist hook from Kevlar using a shout kudako 9/0 Japanese hook. The hook will be tied to the bottom ring of the Owner
TSS-51 ball bearing swivel. The lure will be attached to the swivel with a #11 owner split ring. The assist hook will make it easier to release the fish
without damage. We will also use a single hook on the tail of the lure rather than a treble hook.

We will be using JB 100# hollow core as the main line and will be using a
twisted leader. The twisted leader is made up of 200lb momoi mono and then
a 3' piece of 200lb momoi fluro is attached to the twisty as the bite leader.
The twisty mono is attached to 130lb JB braid via a cats paw connection
and then the other end of the 130lb JB braid is spliced into the main 100# JB main line. The figure 8 knot the connects the twisted mono to fluro remains on the outside of the guides for casting. About 4-5 feet of twisty mono as the shock leader then the 3' fluro as the bite leader.

Twisted leader setup
<a></a><br><span></span>

Figure 8 knot connecting the twisty to fluro bite leader.
This knot remains outside the top guide the whole time
<a></a><br><span></span>

Cats Paw connection for the braid to twisty mono connection
<a></a><br><span></span>



   
ReplyQuote
albemarle24express
(@)
Prominent Member
Joined: 18 years ago
Posts: 677
Topic starter  

Did a break test today. Twisted leader built with 130lb Momoi diamond mono for the twisty and 200lb Momoi fluro for the bite leader with 130lb JB hollow for the cats paw connection.

I crimped a loop in the end of the 200lb fluro with an aluminum crimp and hooked it to the handle of the bench vise. Spliced in a piece of JB 200# braid to the JB 130# braid and spliced a loop in the 200# braid to hook onto the scale when pulled. Used the first scale which goes to 100 lbs and pulled the leader 4 times to 100 pounds. Everything held well. Was worried about the double overhand knot but it did not slip at all. Switched to a 150lb scale and pulled until it broke which was around 140 lbs. Had to try and look and the scale and pull and not fall over when it broke all at the same time. The 130 lb JB hollow braid broke. Pleased to see the knot did not break or slip. and the cat's paw connection held perfectly.

Next test is to see how this twisted leader casts.

The 130lb JB Hollow Braid Broke On The Pull Test - Pleased with the Twisted Leader Outcome



   
ReplyQuote
Share: