SWC Forums

Pull up a chair...let's talk fishing.

Grouper Trolling
 
Notifications
Clear all

Grouper Trolling

38 Posts
17 Users
0 Reactions
126.8 K Views
Kenneth
(@matador)
Famed Member
Joined: 17 years ago
Posts: 3641
Topic starter  

Would he show you a picture and go BAM!!! ?

Huh?



   
ReplyQuote
Kenneth
(@matador)
Famed Member
Joined: 17 years ago
Posts: 3641
Topic starter  

Striper, we are trying to get the grouper trolling dialed in because there is a lot of grouper bottom that we fish for other species over. Might as well get some groupers while trolling. And I just want to catch groupers another way. I have caught groupers while trolling and they were a ways off the bottom which opened my eyes. They have also hit off the marks so they were cruising or at least willing to swim off their structure to hit. The downrigger works for sure. One of the first groupers I caught on the troll was up at 50s bottom area on the downrigger in mid water column.



   
ReplyQuote
Jim Burch
(@)
Active Member
Joined: 12 years ago
Posts: 16
 

Understood. New methods are always appreciated. The first time I caught an American Red off a Lite Line I was amazed that they could be chummed to the top. Plus when you get them on top there is no barotrauma to deal with, they can easily be released. Just be nice to keep a few more....

I'll have to try trolling for grouper as well. Good to hear that they will come away from the structure. For all I know we have hooked them before while trolling deep for kings but with the light drag setting used we lost the fish to the rocks. Just always assumed it was shark or AJs. Heavier drags and tackle would give a better chance to at least see what hit.



   
ReplyQuote
Mark B
(@)
Noble Member
Joined: 22 years ago
Posts: 881
 

Matador- great info, thanks for getting into the real details. I don't troll for grouper on purpose, but great that you do. I've caught a few gags on downriggers while trolling Drone spoons (for kings, cuda, bonita, AJ & mahi) but would be nice to target grouper while trolling...



   
ReplyQuote
mike plowman
(@)
Estimable Member
Joined: 14 years ago
Posts: 121
 

You might also try a Cordell 7 inch Redfin lure. It is a fish-catcher. It floats and makes a v-wake at slow speed and runs about 2 feet deep when cranked. It has heavy forged trebles (2) but they could be replaced with singles of course. If run 10 feet behind a weight/planer, it would run about 2 feet deeper at 4 or 5 mph. Good luck with your efforts!



   
ReplyQuote
Kenneth
(@matador)
Famed Member
Joined: 17 years ago
Posts: 3641
Topic starter  

Thanks plowhandle. I will hunt some of those up.



   
ReplyQuote
Jamie Blue
(@)
Famed Member
Joined: 20 years ago
Posts: 3660
 

I don't think a redfin would handle a grouper. That's a freshwater striper lure. You need something with a wire through harness.



   
ReplyQuote
george
(@gdog)
Estimable Member
Joined: 13 years ago
Posts: 164
 

tried to troll for some grouper a few weeks ago with 8 lb down rigger balls moving at 3.6 to 4.25 knots. angel was to steep to get them to depth. yesterday changed things up with 16 lb down rigger balls and slowed the boat to 2.9 to 3.3 knots reduced the angel to about 35 degrees. trolled a ledge for a bit didn't hook up but had a few hits. i'm uploading a spreed sheet to check depth at a angel for how much cable needed to be out for it.

updated download link
https://www.dropbox.com/s/laqyr1l5vn321qw/down%20rigger%20depth%20math.ods?dl=0

click the 3 dots at the top right of page then download



   
ReplyQuote
Jim Burch
(@)
Active Member
Joined: 12 years ago
Posts: 16
 

tried to troll for some grouper a few weeks ago with 8 lb down rigger balls moving at 3.6 to 4.25 knots. angel was to steep to get them to depth. yesterday changed things up with 16 lb down rigger balls and slowed the boat to 2.9 to 3.3 knots reduced the angel to about 35 degrees. trolled a ledge for a bit didn't hook up but had a few hits. i'm uploading a spreed sheet to check depth at a angel for how much cable needed to be out for it.

updated download link
https://www.dropbox.com/s/laqyr1l5vn321qw/down%20rigger%20depth%20math.ods?dl=0

click the 3 dots at the top right of page then download

gdog,

Have you ever tried the pancake-shaped DR weights? They have a lot less blowback so depth control is better. The only problem I have found with them (other than I don't have a mold for them so they cost me more than the ball shaped ones I pour) is that they are susceptible to strong current and can be swept to the side if you troll cross-current. I like them quite a bit for faster trolling when I use dead baits or lures.



   
ReplyQuote
Mark B
(@)
Noble Member
Joined: 22 years ago
Posts: 881
 

Planers are the best way to control depth & not have the problem of blow-back. Just use 30-35' leaders.



   
ReplyQuote
Drew Maultsby
(@)
Prominent Member
Joined: 17 years ago
Posts: 806
 

Would he show you a picture and go BAM!!! ?

Huh?

Now we know why you didn't recognize him.
If Capt. Ken Roy is still around on the internet, he used to catch a lot of grouper, including Goliaths, trolling in Fla. This was back when Stretchs became popular, and it was probably shallow water trolling.



   
ReplyQuote
Jim Burch
(@)
Active Member
Joined: 12 years ago
Posts: 16
 

Planers are the best way to control depth & not have the problem of blow-back. Just use 30-35' leaders.

I would respectfully disagree. With planers you still have quite a bit of blowback and true running depth of your lures would have to be calculated by using the angle of entry of your mainline. I like planers for certain aspects and have caught several species including wahoo and even bluefins using them. But if I need to keep a lure a few feet off a bottom that continuously changes depth, I just don't think they would be practical.

Using a downrigger with a ball that has no blowback (the pancake) and an easy to read amount of length of cable out is very precise depth control.



   
ReplyQuote
glenn shivar
(@)
Reputable Member
Joined: 14 years ago
Posts: 245
 

If this has been covered, forgive me. in the mid 60's we trolled 2 deep lines for kings and 3 top lines. Deep lines were Penn Mariner reels with wire line and a 1 lb weight. ~20 ft leader and a drone spoon. Often we would slow way down along a ledge and pick up a few grouper. Years later I used large lipped plugs like cisco kids. Sharks were a problem. Hard to get a plug back from a shark and be safe. I think drone or very large pet spoons are better as you can let the shark have it and tie on another. Wow, that was a long time ago! best - glenn



   
ReplyQuote
george
(@gdog)
Estimable Member
Joined: 13 years ago
Posts: 164
 

gdog,

Have you ever tried the pancake-shaped DR weights? They have a lot less blowback so depth control is better. The only problem I have found with them (other than I don't have a mold for them so they cost me more than the ball shaped ones I pour) is that they are susceptible to strong current and can be swept to the side if you troll cross-current. I like them quite a bit for faster trolling when I use dead baits or lures.

The down rigger balls are similar pancake type and cost about $115 for two balls. Here is two images of them.s_l1600_126.jpgs_l1600_1_938.jpg



   
ReplyQuote
Jamie Blue
(@)
Famed Member
Joined: 20 years ago
Posts: 3660
 

cost about $115 for two balls. Here is two images of them.

Eff that. A fish shaped weight costs half that and is even more blowback resistnat.



   
ReplyQuote
Page 2 / 3
Share: