SWC Forums
Pull up a chair...let's talk fishing.
You would have less blow back on your downriggers with braid than you have with cable
cost about $115 for two balls. Here is two images of them.
Eff that. A fish shaped weight costs half that and is even more blowback resistnat.
Where do you get them from i have only seen 8 to 10 lb ones at most that are fish shaped an they don't preform any better the the normal ones. 57 dollars each for a 16 lb down rigger ball is the best i can find. if you know a better price please link it to me.
cost about $115 for two balls. Here is two images of them.
Eff that. A fish shaped weight costs half that and is even more blowback resistnat.
Where do you get them from i have only seen 8 to 10 lb ones at most that are fish shaped an they don't preform any better the the normal ones. 57 dollars each for a 16 lb down rigger ball is the best i can find. if you know a better price please link it to me.
We pour our own fish shaped and round balls. I agree, the fish shaped ones do not perform any better from what I can tell.
I bought a bunch of the pancake ones, which are MUCH flatter than the ones in the photo above, when the store at Atlantic Station on AB went out of business(for the life of me I can't remember the name of the place..). I paid about $10 a piece back then. I have thought about doing a cast and making a mold of them but just have not gotten around to it. They actually are a little less prone to snagging as well.
I also use braid on my downriggers instead of cable. Helps a lot to prevent blowback. I also use an Aftco Goldfinger style release system that allows you to keep the ball in the water while you clip in. Much easier to handle when the boat is rocking.
If I get out again I may try to run some bucktail and spoon combos about 5 foot off the bottom. I know this will produce kings but it should also work for grouper. Maybe throw in a Rapala Stainless Steel Magnum. I figure you have to find some ledges that are at least 60 foot and deeper. Downrigger can do this with no problem.
I was trolling in ledges in 90 to 120 feet of water. Its a lot harder to reach then 60 feet with out a lot of blow back. As such the added weight of the 16 balls is needed that is why I use them. However does the braided line stop the auto stop from working on the down rigger? And can it be used on a normal cannon down rigger with out any modification?
All I have is manual downriggers so I cannot comment on the autostop function. I've used the braid cable for about 15 years now. Some of it is still going strong. Cabela's had some stuff called Fathom Master braid. I think it was 150lb test. I've had Cannon, Invader, and now Penn downriggers. No problem on either. I just left on the cable and tied the braid directly to it.
One added bonus to braid is that it stops the downrigger "hum" that is normally associated with using metal cable. You can often guesstimate how to beat blowback. With some lures, their inherent running depth is very close to what you would lose without calculating for blowback. And most fish come up to feed as well. I just don't sweat a small amount, say under 5%.
I was trolling in ledges in 90 to 120 feet of water. Its a lot harder to reach then 60 feet with out a lot of blow back. As such the added weight of the 16 balls is needed that is why I use them. However does the braided line stop the auto stop from working on the down rigger? And can it be used on a normal cannon down rigger with out any modification?
I don't know if they all are made this way but a lot of Cannon downriggers have a 2 piece spool and putting braid right on it will break the spool eventually as the line gets pulled tighter and tighter against it and works its way into the split, forcing it apart. To prevent this you would need to run some other larger diameter material as a backer for at least a few rounds to keep the braid off the spool directly. I have no idea how the auto stop functions and if it would have an effect on that.
If you have to go that heavy just use a planer
