SWC Forums
Pull up a chair...let's talk fishing.
I need help. Local technician told me that my 3 year old 3 1/4 ton unit needed a txv valve and the r410a Freon was ok. Told me it was around 300 dollar job. The tech arrived a couple of days later with the valve and a dryer and spent about 2 hours in the yard working on the unit. Got it working and gave me a bill with 801 dollars written on it. Of course I almost had a heart attack and wanted to know why the cost had more than doubled. Told me he had to add 7 lbs of R410A Freon at 40 dollars a pound plus labor. I complained to the company but they are willing to take 100 dollars off of the bill but told me that one should always install fresh Freon instead of re-using the older stuff. Did I get taken to the cleaners on this one or should I agree to pay them what the tech originally told me? I will be paying them something and allow them to make a modest profit but according to my research it should not have been over 450 at the max. Parts were free due to unit being under warrantee.
Man, I almost killed a Trane technician in my house. Told my wife to get the kids and take them to their rooms cause they didn't want to witness what was about to go down. Then told him if I get my hands on him he wasn't leaving my house. Same kind of situation you have. Don't mind paying for service call but tell me I don't have a leak and then charge for 2 lbs of Freon??? It's a closed system, if you add Freon, you better find my leak!. Then had the balls to charge me 80.00 for hosing my coil off. I then presented him with a 200.00 bill for renting my hose! It was not a pretty sight. Also hear that Trane units are POS' now that they are manufactured in Mexico! It's a shame things now a days can hardly make it out of warranty period before needing replaced. I feel for you, and yes you probably got taken to the cleaners. As for me, the 80.00 was removed from bill and Freon was on the house after this altercation.
Well in this case it was not a trane technician but a local company out of Beaufort. You are right tho about Trane being a POS and for darn sure I have bought my last one.
Well in hvac courses at the college they did stress the point of covering yourself by putting new refrigerent back not to replace with the recovered refrigerant. THIS was In case the system has had moisture introduced at some point you wont be putting it back in and it falling back on you..Most techs wont do it for that reason but yeah you could of reused it if you wanted.
You could easily do an acid test to determine if it could be recovered.
Yeah I work for a large heating co he ran one up in you
Also have a Trane. Had techs out 8 times in first 4 years. I've pretty much had the entire thing rebuilt at this point.
Hate to see American Companies like Trane that used to have an excellent reputation go to pot, of course that should not be an excuse for a local heating and air company in the Beaufort area to stick it to you. Am I obligated to pay the company what they say I owe or should I stick with the estimate the technician gave me after he did the diagnostics?
I would hold them to the estimate!! That keeps companies from low-balling to get the job then jacking up the bill. Small claims court is cheap and easy. By the way r410a is $5.00 a lb on amazon.
I am an electrician who works with several Trane HVAC companies. The cheaper units with lower seer ratings are not great. The high end units with variable speed/variable refrigerant flow are awesome units that rarely have issues and are very very efficient. The best high end units out there.
The part you mentioned is about $75. R410a is usually around $25 a pound due to the licensing required. Yes, YOU can buy it for less. However, an HVAC company has to follow certain environmental guidelines and licensing requirements for using the various refrigerant, and these are not cheap.
That unit doesn't hold much more than 7 pounds, and you said he also replaced the dryer canister. It sounds like he had to vent the system, change the canister and valve, pump it back down, and add the refrigerant.
So, I would say parts $120ish
Labor 3hrs @$85
r410 7# @ $25
That's about $550 give or take. $800 seems really high to me.
parts were suppose to be under warrantee therefore there was no cost for parts other than 7 lbs of R410 Freon which I was told should have been re-used but since the Repairman did not carry a re-claim tank that was clean the company said it was cheaper to add new Freon than to have to buy a reclaim tank , I also found out the hard way that NC taxpayers are now required to pay sales tax on labor for many service providers. That tax really hurts us ol timers on fixed income.
Side note, For some reason am not able to answer my private messages but one of you were correct when you guess which company I am complaining about. To the other message you would be advised to look in Morehead for a heating and air man.
I would hold them to the estimate!! That keeps companies from low-balling to get the job then jacking up the bill. Small claims court is cheap and easy. By the way r410a is $5.00 a lb on amazon.
Since my pm does not work and will not allow me to answer them your guess was correct as to which comapany is giving me trouble
Pro tip... When buying a new system, get a parts and labor warranty. There's so much markup in HVAC it's ridiculous. That system they sell you for $6k, they pay about $1800 for. OP good luck with it, they'll likely say that original quote was just an estimate and other work had to be done. Raise hell and get them down a hundred or so.
If the part is under warranty should not Trane have to pay for labor? He did tell you 300 and if your Freon was good why should you have to pay for new it’s not your fault he did not have a clean reclaim tank.
evidently you must reclaim Freon in your unit to a new or clean tank in order to put it back into your system. The Dealer claims they did not have a clean reclaim tank so it forced me to use new Freon at 40 bucks per pound plus labor. One can buy R410A Freon for around 5 bucks per pound delivered so imagine that's the real reason this company decided that I needed new Freon. Trane does not warranty labor only parts that you need, Freon is not considered to be a part. I also know the repairman was on my property for about 3 hours total and that includes the initial trip when he did the diagnosis. My total labor charges were 460 dollars plus 90 dollars for the diagnosis. Still trying to figure out what to pay this company and make them a modest profit at the same time. I am more than willing to meet them in small claims court if that is where it ends up cause I am not about to pay them the full amount they are demanding.