SWC Forums

Pull up a chair...let's talk fishing.

help on Trane air/h...
 
Notifications
Clear all

help on Trane air/heat

39 Posts
16 Users
0 Reactions
52.7 K Views
Mike
 Mike
(@baytro23)
Honorable Member
Joined: 18 years ago
Posts: 681
 

You guys that hate Trane, go buy a Lennox. :lmao: Around Raleigh the going rate to replace a TXV in warranty is $600-$900. The refrigerant can be re-used. We run it thru a filter dryer on the way out.

This job involves going out to diagnose (15 mins to 3 hrs depending on the competency of the tech) // going to the parts house to pick up the part // going back to your house to install which involves brazing, nitrogen, and sticks of solder at $4 a piece // vacuum // re-charge // checkout // then driving back to the parts house to turn the warranty part in // then getting billed for the part for 3 months in a row because they refuse to issue warranty credit til the owner (me) goes in and talks to a manager (yes this happens more often than it should).

We get $75 per lb of R410 and $125 per lb (lowest in town) for R22.

You people bitching about the 2 hrs a tech spends at your house have no clue what it costs to run a business. I'll be the 1st to admit there's a lot of crooks in HVAC. Choose wisely. I haven't paid for advertising in over a decade and my business has grown every yr.

We're entitled to work as hard as we want to fund our food, mortgage, boat, retirement, social security (double), have as many kids as we want and can afford, etc., etc., etc.

How much do you make? How much is your employer funding for your ss each month?, for your 401k? for your health insurance? When people bitch about what the trades make they compare (in their minds) their takehome pay. Compare apples to apple sometime and you might be surprised.

FYI - why should we make less for an in warranty job? We're missing out on the parts profit so we charge more for labor on in warranty repairs to try and net the same profit (we're doing the same job). We give a 2 yr warranty on labor and I give my customers a break on labor after that so most of the above is talking about warranty jobs we did not install.

End of rant.



   
ReplyQuote
Glen Montgomery
(@)
Reputable Member
Joined: 16 years ago
Posts: 284
Topic starter  

baytrol 23, if your technicians tell one of your customers that it looks like the job will end up costing about 300 dollars after the diagnostic trip do you allow him or her to tack on another 500 dollars to the bill without informing the customer?



   
ReplyQuote
Dave Arnold
(@)
Noble Member
Joined: 19 years ago
Posts: 842
 

FYI - why should we make less for an in warranty job? We're missing out on the parts profit so we charge more for labor on in warranty repairs to try and net the same profit (we're doing the same job).

So basically as far as you are concern, you are justified in screwing the guy on the labor charges!!



   
ReplyQuote
Greg Thornburg
(@midnighthour)
Estimable Member
Joined: 20 years ago
Posts: 92
 

Baytro, you're absolutely right. You can do whatever you want and do it how you want to. I don't care! But I have been an electrician for nearly 30 years now and if a client called me for a bad receptacle. I go out on service call, find it is a GFCI tripped, I simply reset GFCI, look for what possibly caused it to trip, charge for service call only, and say have a nice day. I won't go to supply house (back of truck) be gone for couple hours, charge for replacing bad receptacle and 3 hours of work for no reason. You get the point ,don't you? We're talking about people shitting someone out of their (also) hard earned money.



   
ReplyQuote
Scaramucci
(@)
Honorable Member
Joined: 12 years ago
Posts: 588
 

If HVAC company told me they didn't OWN a clean tank for refrigerant recovery, I would immediately eject them from my property. What HVAC tech is not prepared to recover refrigerant???? Sounds like you are dealing wih a shade tree operation.



   
ReplyQuote
Scaramucci
(@)
Honorable Member
Joined: 12 years ago
Posts: 588
 

You guys that hate Trane, go buy a Lennox. :lmao: Around Raleigh the going rate to replace a TXV in warranty is $600-$900. The refrigerant can be re-used. We run it thru a filter dryer on the way out.

This job involves going out to diagnose (15 mins to 3 hrs depending on the competency of the tech) // going to the parts house to pick up the part // going back to your house to install which involves brazing, nitrogen, and sticks of solder at $4 a piece // vacuum // re-charge // checkout // then driving back to the parts house to turn the warranty part in // then getting billed for the part for 3 months in a row because they refuse to issue warranty credit til the owner (me) goes in and talks to a manager (yes this happens more often than it should).

We get $75 per lb of R410 and $125 per lb (lowest in town) for R22.

You people bitching about the 2 hrs a tech spends at your house have no clue what it costs to run a business. I'll be the 1st to admit there's a lot of crooks in HVAC. Choose wisely. I haven't paid for advertising in over a decade and my business has grown every yr.

We're entitled to work as hard as we want to fund our food, mortgage, boat, retirement, social security (double), have as many kids as we want and can afford, etc., etc., etc.

How much do you make? How much is your employer funding for your ss each month?, for your 401k? for your health insurance? When people bitch about what the trades make they compare (in their minds) their takehome pay. Compare apples to apple sometime and you might be surprised.

FYI - why should we make less for an in warranty job? We're missing out on the parts profit so we charge more for labor on in warranty repairs to try and net the same profit (we're doing the same job). We give a 2 yr warranty on labor and I give my customers a break on labor after that so most of the above is talking about warranty jobs we did not install.

End of rant.

So if you quote a guy $400, then charge him $800 because you weren't skilled enough to diagnose the problem and perform an accurate estimate, said guy should be on the hook for your incompetence?

No sir. If you go a dollar over your estimate, and you expect to get paid for it, you better damn well get a customer's approval before doing the "extra" work. I think that's what small claims court will say.



   
ReplyQuote
Glen Montgomery
(@)
Reputable Member
Joined: 16 years ago
Posts: 284
Topic starter  

parts were Fedexed to Repair shop and supplied by Trane at no cost. From what I can tell the repairman spent a total of 3 hours at my house, which is about 14 miles from shop , NC sales tax of 7% on labor , I refuse to pay for new Freon since it was not needed, figuring 90 bucks per hour comes to 270 dollars plus tax of 20 dollars equal around 290 dollars which is almost what the tech told me it would run. Thinking about ordering a 25 lb bottle of R410A Freon from amazon free shipping and simply giving it to the repair shop in exchange for the 7 pounds they put in my unit since they seem to value it so much. 290 dollars for the repair job and 110 plus tax for a large 25# bottle of Freon comes to 407 dollars. Am I being fair?



   
ReplyQuote
David Mcfadyen
(@)
Reputable Member
Joined: 14 years ago
Posts: 269
 

I didn’t think you could buy freon without a license



   
ReplyQuote
Glen Montgomery
(@)
Reputable Member
Joined: 16 years ago
Posts: 284
Topic starter  

I didn’t think you could buy freon without a license

You can as long as its over 20lbs. Have no earthly idea as to why you or I can purchase 1000 lbs of the stuff but not allowed to purchase 5 or 6 lbs.



   
ReplyQuote
Dave Arnold
(@)
Noble Member
Joined: 19 years ago
Posts: 842
 

You are far far too generous with that offer. They have attempt to basically extort a 266% overcharge that they cannot justify. Your offer to pay them 66% more than the estimate is one hell of a deal for them. Hold them to their estimate, you have already been extremely "Christian" by not mentioning their name. They should give you a big damn discount for that!



   
ReplyQuote
Kevin Welsh
(@)
Trusted Member
Joined: 20 years ago
Posts: 52
 

I sell HVAC and worked on it as well, going on 35 years now. Damn I'm getting old. Trane was bought by Ingersoll Rand and shipped everything south. Trane is having problems with leaks in the evap coil, txv's sticking and reversing valves. If it's possible your system could of been pumped down and most of the 410a could of been saved give or take a pound or two. I replaced my own txv along time ago on a trane, pumped it down replaced the txv started it up checked pressures and if I remember correctly I was off by about a pound. Like my customer told me they finally found out what could stop a trane.



   
ReplyQuote
Mike
 Mike
(@baytro23)
Honorable Member
Joined: 18 years ago
Posts: 681
 

baytrol 23, if your technicians tell one of your customers that it looks like the job will end up costing about 300 dollars after the diagnostic trip do you allow him or her to tack on another 500 dollars to the bill without informing the customer?

NO!!



   
ReplyQuote
Mike
 Mike
(@baytro23)
Honorable Member
Joined: 18 years ago
Posts: 681
 

You guys that hate Trane, go buy a Lennox. :lmao: Around Raleigh the going rate to replace a TXV in warranty is $600-$900. The refrigerant can be re-used. We run it thru a filter dryer on the way out.

This job involves going out to diagnose (15 mins to 3 hrs depending on the competency of the tech) // going to the parts house to pick up the part // going back to your house to install which involves brazing, nitrogen, and sticks of solder at $4 a piece // vacuum // re-charge // checkout // then driving back to the parts house to turn the warranty part in // then getting billed for the part for 3 months in a row because they refuse to issue warranty credit til the owner (me) goes in and talks to a manager (yes this happens more often than it should).

We get $75 per lb of R410 and $125 per lb (lowest in town) for R22.

You people bitching about the 2 hrs a tech spends at your house have no clue what it costs to run a business. I'll be the 1st to admit there's a lot of crooks in HVAC. Choose wisely. I haven't paid for advertising in over a decade and my business has grown every yr.

We're entitled to work as hard as we want to fund our food, mortgage, boat, retirement, social security (double), have as many kids as we want and can afford, etc., etc., etc.

How much do you make? How much is your employer funding for your ss each month?, for your 401k? for your health insurance? When people bitch about what the trades make they compare (in their minds) their takehome pay. Compare apples to apple sometime and you might be surprised.

FYI - why should we make less for an in warranty job? We're missing out on the parts profit so we charge more for labor on in warranty repairs to try and net the same profit (we're doing the same job). We give a 2 yr warranty on labor and I give my customers a break on labor after that so most of the above is talking about warranty jobs we did not install.

End of rant.

So if you quote a guy $400, then charge him $800 because you weren't skilled enough to diagnose the problem and perform an accurate estimate, said guy should be on the hook for your incompetence?

I don't know how to answer that. I always diagnose correctly and bill what I say. Why would anyone use a company that can't do the job right?

No sir. If you go a dollar over your estimate, and you expect to get paid for it, you better damn well get a customer's approval before doing the "extra" work. I think that's what small claims court will say.

If I quote $400 I charge $400. How did you get I charge double or that I am not skilled enough to diagnose any problem I run across from my post?



   
ReplyQuote
Kenneth
(@matador)
Famed Member
Joined: 17 years ago
Posts: 3641
 

I need help. Local technician told me that my 3 year old 3 1/4 ton unit needed a txv valve and the r410a Freon was ok. Told me it was around 300 dollar job. The tech arrived a couple of days later with the valve and a dryer and spent about 2 hours in the yard working on the unit. Got it working and gave me a bill with 801 dollars written on it. Of course I almost had a heart attack and wanted to know why the cost had more than doubled. Told me he had to add 7 lbs of R410A Freon at 40 dollars a pound plus labor. I complained to the company but they are willing to take 100 dollars off of the bill but told me that one should always install fresh Freon instead of re-using the older stuff. Did I get taken to the cleaners on this one or should I agree to pay them what the tech originally told me? I will be paying them something and allow them to make a modest profit but according to my research it should not have been over 450 at the max. Parts were free due to unit being under warrantee.

Yes. Your anal region was serviced.



   
ReplyQuote
Glen Montgomery
(@)
Reputable Member
Joined: 16 years ago
Posts: 284
Topic starter  

have not paid them a dime yet. Most people tell me and from what I have read that to change out a txv valve is about an hour job plus another hour to pump the system down and re-install the old Freon. Anyways the tech gave me an estimate of around 300 dollars and he should know. The company has dropped the price down to just under 700 dollars and claim it cost more to carry around 1 use tanks to be used in recovery of Freon than it does to simply add new Freon at 40 bucks per pound plus labor. Should have gotten the estimate in writing I guess but am now debating whether to pay the 700 dollars or see them in small claims court.



   
ReplyQuote
Page 2 / 3
Share: