SWC Forums

Pull up a chair...let's talk fishing.

Hooks breaking on c...
 
Notifications
Clear all

Hooks breaking on clarkspoons

13 Posts
12 Users
0 Reactions
40.6 K Views
Marvin
(@)
Active Member
Joined: 14 years ago
Posts: 12
Topic starter   [#44047]

Just in case anyone was having a similar problem, I thought I would share some info. I bought 5 Clarkspoons from Tex's Tackle a week ago. I went trolling (my first time ever), pulled in the two lines I had out and noticed the hooks were broken off both of the spoons. I assumed I had somehow gotten into some rocks or really big fish but it just didn't make sense to me. Yesterday I went out, opened my tackle box and 2 of the three spoons I had left had the hooks broken off lying next to the spoons. They were less than a week old and had not even touched the water yet. I took some pictures and sent an email to Clarkspoon. After sending the email I did some searching online and discovered I wasn't the only one. This is the reply I got this morning from Clarkspoon customer service:

I apologize for the issue you had with the hooks. We use USA-made Eagle Claw hooks. They informed us last summer of an issue with some of the stainless used to make our hooks. They have since sent us replacements and insure us they have resolved the issue. Let me know your address and I will mail you some replacement hooks to you.

Thank you for choosing Clarkspoon!

Phillip



   
Quote
Guy Whilden
(@sailfish236)
Estimable Member
Joined: 15 years ago
Posts: 204
 

That is crazy they were breaking like that. I have used those for as long as I can remember and can usually get 2 or 3 season out most of them is they are taken care of. The ones with shiny stickers are always the first to go but I still have a couple really big ones that use for kings and have had them for 5 seasons now but I always wash with fresh water and dry immediately after fishing with them. Glad to know that Clark will send you new hooks. That makes me like the company even more!



   
ReplyQuote
Wes Hudson
(@reznor)
Reputable Member
Joined: 16 years ago
Posts: 441
 

Stainless is the best metal to use against corrosion but as you found out not always the most durable or the toughest. I would think steel coated of some sorts would be the best. But they shouldn't be breaking like that. i guess made in America ain't what it used to be. I see it all the time. They should send you a few free spoons with your order.



   
ReplyQuote
Scott Robbins
(@srobbins)
Estimable Member
Joined: 12 years ago
Posts: 179
 

Interesting, I've had the same problem on probably 5 or 6 clarkspoons late last year and this, primarily size 0 but last weekend on a #2 as well. I thought they were breaking off in the water on a big fish although I would have thought I would have heard the strike and a couple of them came out of my tackle box broken still in the package and certainly didn't remember stepping on or abusing them. I just started fishing down here late last year so they have all been purchased since.

I think I'll send them an email as well.



   
ReplyQuote
William McCann
(@werewolf0711)
Famed Member
Joined: 15 years ago
Posts: 3133
 

It's a known issue that is going on with the clarkspoon brand. I don't think they have it fixed yet or there are still plenty of bad product that isn't being pulled. Any who, tsunami is making them as well and their brand has seemed to be much much better.



   
ReplyQuote
whitelightning
(@whitelightning)
Estimable Member
Joined: 20 years ago
Posts: 207
 

Check your hooks, if they have one spot of rust on them that is where they will break. I have replaced many on mine, but I have been using the spoons that I have for many years. Most tackle shops sell replacement hooks. Hope this helps.



   
ReplyQuote
Clark Beeson
(@)
Reputable Member
Joined: 21 years ago
Posts: 200
 

The hooks tend to break where the stainless hook touches the spoon. Galvanic corrosion or something. Happens all the time when I have put up used spoons for a while. I finally started twisting each hook before I put it in the water. Better to break the hook before use.

Hate it when fishing for a while, not catching, then pulling in a spoon with no hook!



   
ReplyQuote
James Lawson
(@)
Estimable Member
Joined: 13 years ago
Posts: 93
 

Had the same problem last year, went to Island Tackle @ Carolina Beach and the guy gave me a handfull of hooks and screws to replace. The tackel vendor has replacements given to them from Clarkespoon to fix the problem



   
ReplyQuote
Captian Keith Logan
(@capt_keith)
Famed Member
Joined: 22 years ago
Posts: 1883
 

Been having this problem for the last 5 years. Have talk to Sea Strike about it have not got any where with it. They just keep send us new hooks that still break...



   
ReplyQuote
Captian Keith Logan
(@capt_keith)
Famed Member
Joined: 22 years ago
Posts: 1883
 

The info below is from there facebook page: https://www.facebook.com/clarkspoon/

To all Clarkspoon users,

We are well aware of the hook problem and very disappointed in the quality of product we sent to market. I’m sure you are as equally frustrated as we are here at Clarkspoon. Previous to February 2016 we used Eagle Claw hooks exclusively on our spoons. We experienced inconsistent quality within batches of hooks. The problems are mostly in 2/0 and an occasional 5/0 hook. The 2/0 hooks are used in 00 and 0 spoons as the 5/0 is used in size 1.

Late in the 2015 season we changed manufacturers due to Eagle Claw’s inability to assure us they could correct this problem. Since it is a custom hook for the smaller spoons (00 and 0) the new product was not available until early this year. We are now assembling all spoons with VMC Permasteel hooks. So far we have been very pleased with the quality and results. Although this change was implemented well in advance of the season, there is a substantial amount of product in the supply chain as well as your tackle box.

Should you experience breakage with Clarkspoon, please advise us of the spoon style/models, and quantity of lures you have and we will mail you replacement hooks and screws for your lures. Please remember to include your mailing (USPS) address. If you can email your request to service@clarkspoon.com we will respond promptly.

Should you be unsure of the hook in your spoon see picture below. It shows the slight finish difference from stainless steel as compared to VMC Permasteel.

We sincerely apologize for the inconvenience this situation has caused.

Clarkspoon changed to VMC hooks early in 2016. The new hooks have a proprietary plating that VMC identifies as “Permasteel”. We were advised the plating will tarnish or turn darker after many hours of use and exposure to the salt water fishing environment. In our experience the color change (tarnish) first appears to be rust. We have been advised by VMC that it is not rust. Their response is as follows:

“PERMASTEEL WILL EVENTUALLY TURN DARKER AFTER MANY HOURS OF USAGE. IT IS NOT RUST. IT IS A MIGRATION OF TUNGSTEN THAT SACRIFICES ITSELF TO PROTECT THE HOOK”

Clarkspoon has used three different hook manufacturers over the years and compiled a list of styles that will fit the spoons. We have a custom hook produced for the 00 and 0 size spoons that is not readily available from the hook manufacturer. We have found a “stock” hook from Mustad that will fit the small 00/0 models but requires a slight reformation on the 0 size spoon. The eye on most stock 2/0 hooks is not large enough to allow the 2-56 screw to pass through. The Mustad style 34009-2/0 will work if you slightly bend the tail of the 0-RBMS spoon.
We will continue to check various hook manufacturers for fitment as we progress. For a current listing of manufacturers’ hooks for Clarkspoon send an email request to service@clarkspoon.com



   
ReplyQuote
Drew Maultsby
(@)
Prominent Member
Joined: 17 years ago
Posts: 806
 

"The problems are mostly in 2/0 and an occasional 5/0 hook. The 2/0 hooks are used in 00 and 0 spoons as the 5/0 is used in size 1."

Duh! Those sizes are probably 90+% of the spoons sold, so who is surprised that that is where most of the problems are?



   
ReplyQuote
Robert Gilliam
(@coastwx)
Honorable Member
Joined: 22 years ago
Posts: 430
 

Thanks for posting this problem. I was confused as heck after the two handlines made in June had broken Clarkspoon hooks after a single trip where they were only in the water for 30 min. It's almost unbelievable they would break for no reason.



   
ReplyQuote
David Drye
(@david20675)
Honorable Member
Joined: 12 years ago
Posts: 513
 

I agree !!! I use them 1 weekend come back next ,there done



   
ReplyQuote
Share: