SWC Forums

Pull up a chair...let's talk fishing.

How many watts for ...
 
Notifications
Clear all

How many watts for an anchor light?

6 Posts
5 Users
0 Reactions
8,351 Views
Michael Sapp
(@)
Estimable Member
Joined: 21 years ago
Posts: 170
Topic starter   [#13571]

I am wanting to do some night fishing. I would like to use my trolling motor battery in the front of the boat to power the anchor light, as well as an area light to fish with. That way I don't have to worry about not being able to start my motor when I'm ready to go home due to the anchor light pulling the starter battery down. So I thought I would get one of the low voltage lights from Lowes Hardware and put it on a pvc pipe to get it up so the bugs will be up out of the way. But, I don't know the regs. as to how powerful the anchor light has to be! Does anyone know? Come on Coasties. It's time to shine!! (excuse the pun) ๐Ÿ™„ Thanks.



   
Quote
Danny L. Foster
(@)
Reputable Member
Joined: 20 years ago
Posts: 206
 

Not sure about the watts but should be visible for 2 miles for boats less that 39 feet from Boat US website. Seems like my old light used a 1003 bulb should be able to look up the wattage at a auto parts store. On my other boat I had all the nav lights working off the trolling batteries so I could not run down the starting battery and I could fish all night and still have battery left was using two 27 group 825 crank if I remember right
Dan



   
ReplyQuote
Bob Earl
(@)
Noble Member
Joined: 21 years ago
Posts: 2056
 

The Deep six power pack might be something to consider it weighs 22 lbs stores easily and can be used with a power inverter.

I am doing a test right now on duration, how long it will power a 100watt florescent bulb through a power inverter. I will post the results.
http://www.southchathamtackle.com/store/store.php?crn=227



   
ReplyQuote
(@)
Noble Member
Joined: 20 years ago
Posts: 1598
 

Since the light has to be visible 360 degrees then in most boats a bow mounted light would not be acceptacble. If using a CC console it should be mounted on top of the console or if you have a T-top then on top of the T-top. If no console then you can remove your stern light if not 360 degree and replace it with a 360 degree light on a 48"-60" pole. Just look up Perko or Attwood.



   
ReplyQuote
Scott
(@scottk)
Noble Member
Joined: 20 years ago
Posts: 1338
 

Get an LED "all around light" to reduce amp draw to very low levels compared to incandescent lights, and battery meter to check remaining battery power.

I would run it overnight on the trailer at home for an hour or two more than you anticipate night fishing to be and see if your moto cranks for a "real world test".

Keep batteries in good shape, cells topped off, load test them every so often for free at an auto parts store.

Also, you can find the amp draw of what all you are running compared to the reserve time of your batteries and do some math to see if you'll be OK, add 20% as a safety factor.



   
ReplyQuote
Scott
(@scottk)
Noble Member
Joined: 20 years ago
Posts: 1338
 

I also think it has to have three mile visibility on the light as well.



   
ReplyQuote
Share: