SWC Forums
Pull up a chair...let's talk fishing.
Does anyone in the triangle area have a humminbird 798 ci si? The sonar on my isn't working and was hoping to test it on another boat to see if it is the unit or the transducer. I have checked to make sure the sonar is turned on in the menu.
What is/isn't working on your unit??? Do you have any kind of image or just a blank screen when set on sonar??? Have you tried viewing a split screen???
Just by reading your post I would be suspicious the unit itself is defective!!!
It shows the marks for the depth range but there is no bottom reading or clutter or anything. I have tried split screen, regular imaging, down imaging, and side imaging. I've felt the transducer (boat out of water) and not felt any "pinging" which if I remember right you should feel if it is firing.
Is this happening only when it is out of the water? Or did you pull it out to touch the transducer?
Not to be a smart A$$, but it won't work out of water... You will not get any bottom reading
OK; boat out of water will not show any thing other than depth lines as to what depth range it is / was set to ,don't think you can feel any pinging because pinging is all electronic and at a high freq.... I would float around and play with
settings and cable conections to see if any thing changes.,make notes and call/e-mail h-bird service
Phone> 1-800-633-1468
e-mail>> service@humminbird.com
address>>>>Service Dept.
678 Humminbird Lane
Eufaula , Al. 36027
touching transducer was out of the water. Everything else was while in the water. I was thinking I had remembered being able to feel kind of a ping from transducers out of water. I knew I would not get a reading with the boat out of the water. Tried all sorts of stuff (different screens, switching sonar on and off, etc) while it was in the water to no avail.
Mine got set on shallow water like 10' when I got over 10 it sho nothing and I can't here mine ping
THanks!