SWC Forums
Pull up a chair...let's talk fishing.
I tow a 28' Seafox with a 1500 suburban. The boat with 1/2 take of fuel, trailer, engines...everything weights approximately 8500 lbs. I have a load rite 5 star trailer. I originally intended to leave it at the beach and didn't care if I had cheap tires. The tires were load star bias with the proper weight limit. I noticed even at full inflation (65 PSI) they still looked slack. I also noticed driving that they compressed quite a bit. Pulling the boat out of the water most of the weight transfers to the front axle for a few feet and they seemed to almost squash flat! I hated them but again didn't tow it so didn't care.
Now I tow the boat 200 miles one way from Mebane, NC to Southport, NC. My suburban averaged 6.5 MPG and the rig was a lot for it in terms of not having good power. I trashed those crap tires and replaced them with Maxxis tires (radials).
I went from 6.5 MPG to 9 MPG and it was like pulling the rig 2,000 lbs lighter. My suburban stayed in high gear more and went to lower gears less frequently. It made all the difference in the world!
Money well spent!
Good to hear! I'll be switching over very soon!
Did you stay with the load range D or go to E. And what was the out the door price as Ive been comparing places for a few weeks now
Edit: saw it in the other post. Good price
I found a place on eBay that has the trailer tires load range e radials 225 75 15 for 157 bucks. That 2 tires for 157 place is also located in Sparta nc
My maxxis are load range E and four 225/75 R15 were $479.
My maxxis are load range E and four 225/75 R15 were $479.
Mounted and balanced? From where?
Mounted and balanced by Tire Center in Burlington, NC
Mounted and balanced by Tire Center in Burlington, NC
Thank you!
